Piha cone nzzle | Nā'ōkuhi helu maʻamau

1. Hōʻikeʻike

ʻO kahi nozzle cone piha e hana ai i kahi piha (luhi) cheray spira i hoʻohanaʻia ma kahi o ka lehulehu, hopena, a iʻole e koiʻia ai ka'ōpala.

Ua loaʻa iā lākou ma waena o kaʻoluʻolu, ʻO ka hoʻomaʻemaʻe, ʻO ka pale lepo lepo, he wike, Ke ahi / ahi, ʻO nā noi a me nā lako hana hana.

Nā koho koho koho hoʻokaʻawale, ka nui o ka drooplet, Ka Holo Waike, Ka paipai, ʻO ka hoʻohālikelike kūpono a me ka clogs i ka hopena.

Ua wehewehe kēiaʻatikala pehea e hana ai i nā hana nozzles cone piha, ʻO ka nui o nā metrices hana, Nā Hōʻike Hōʻike a me nā koho hana, Nā papa inoa hana hana a me nā koina hana pono, hoʻohālikelike i nā chee i nāʻano nozzle nozzle, a hāʻawi i kahi papa inoa o ka mea kūʻai aku a me ka Outlook i ka hana hou.

2. He aha kahi cone cone piha?

ʻO wehewehe

He cone piha Nzzle ʻo ia kahi mea hana e hoʻohuli ai i kahi wai i hoʻopiliʻia (a iʻole he'āpana wai-wai) i loko o kahi paʻa (piha) COTIcal SPY - i.e., Ua hoʻopihaʻia ka nui o ka spirame mai ke kenekulia ma waho o kaʻaoʻao cone, me kahi kikowaenaʻole.

ʻAʻole makemake i nā nozzles cone (he aha ka mea i loaʻa ai kahi mea hana) a iʻole nā ​​mea hao fute fan (e hana ana i kahi Fan Fan), ʻO nā hoʻolālā piha piha e hōʻoia i nā wahi āpau i loko o ka wahi i loaʻa ai i kahi ākea e loaʻa i ka hoʻolahaʻana o ka wai.

Ua kohoʻia nā Nzzles Conezzles piha i keʻano o ka hoʻokaʻawaleʻana, hopena hopena, a me ka uhi kūlike ma waena o kahi wahi i koiʻia (ho'ōla, ka holoi, ʻO ka pale lepo lepo, dlige, Cipi, etc.).

ʻO ka weheweheʻana i nā mea maʻamau a me nā hiʻohiʻona:

• Hoʻokaʻawale (Nui): ahu 15° - 120 ° (i kohoʻia e hoʻokūkū i ka'āpana sparay i kahi kiola i hāʻawiʻia).
• Orifice / Orificeʻohana: ka pua a puni ka lua 0.1-10 mm; Hoʻohana nuiʻia nā hiʻohiʻona lehulehu e hoʻomaikaʻi i ka redundancy a me nā pale clogriging.
• Ka hoʻokaʻawaleʻana: nā hoʻolālā piha piha piha e hana i nā helu he nui; Loaʻa pinepine nā huahana kiʻekiʻe kiʻekiʻe DV90 / DV10 hoʻokokoke hou 3:1 a iʻole ka maikaʻi ma ke kaomiʻana.
• Noi: Aia ma kahi o nā wahi uhi a iʻole nā ​​hopena mechanical (ʻO ka manawa plux) ʻoi aku ka nui o nā mea ma mua o ka atomization maikaʻi loa.

Pehea e hana ai kahi hana nozzle cone?

Ua hoʻokumuʻia ka spiray ma nā papa hanaʻekolu i loko o ka nozzle:

Kahe nui & shurl hanauna

ʻO ka fladid ka mea i hoʻopaʻa muaʻia ma kahi keʻena kūloko.

Hoʻohana maʻamau nā mea hoʻolālā i nā inlets tangential, ʻO nā axial / tangential vanes a iʻole nā ​​lua (ʻO nā alapine 2-6 hānai a iʻole 3-6 Vane mau mea) E hoʻohuli i ka kahe axial Axial i ka neʻe rotational.
ʻO ka hopena o nā Vortex no nā mea e kahe ana i waho e ka hana ma ka Centrifugal, Ke hoʻomākaukau nei e puka i ke kīkēʻole e like me ke kaniʻana i ke apo a iʻole ka pepa.

Laina cetical (a iʻole jet cluster) hoʻokumu

Ke kaheʻana o ke kaheʻana ma o kahi orifice circular (tuhu) a iʻole he hui pūʻana o nā'āpana liʻiliʻi.

Ka geometry (Orifity diameter, Lip Confourt, Nā Mō'ī) e hoʻohuli i ka kahe wai i loko o ka E hoʻonui ana i ka pale wai wai a iʻole he mea pāʻani o nā mea e hoʻopili ai i nā pahu e hoʻopiha i ka nui o ka cone.

He liʻiliʻi liʻiliʻi nā'āpana'āpana (NA MANAO O KA MOKEN) A hoʻonui i ka radius.

Pale aku i nā'āpana i loko o nā'āpana

I ka manawa i komo ai ka pepa a iʻole nā ​​mea i pili i ke ea no ka mea i loaʻa iā lākou i ka hoʻokūkū ma waena o nā mea hoʻokūkū, ʻO Aerosdynamic Shear a me nā papa kiʻekiʻe.

ʻO keʻano o keʻano hana, Orifice geometry, wai wai (huakai, Viscosity, Pā'ā'āʻaʻia) a me nā kūlana ambient.

3. ʻO nā mea hana maikaʻi o nā mea pāʻani o ka cone piha

ʻO ka hana o kahi nozzle cone piha i weheweheʻia e ʻEono mau metrics core i ke aupuni e hoʻopili ai i ka uhi, KAOLELO, a me ke kaʻina hana.

ʻO kēia mau mea maʻamau ma lalo ISO 8022 (Spray hōʻike) and Astm D / e hōʻike i nā hana hōʻike E hōʻoia i ka hoʻohālikelikeʻana i nā mea hana.

Nā papaʻaina

4. Nā mea waiwai o ka cone cone piha

ʻO ka waiwai o kahi nozzle cone piha piha e hoʻoholo pono ai i kāna durability, Ke kū'ē neiʻo Corrosionion, Kālā, a me ka kūpono No nā wai kiko'ī a iʻole nā ​​wahi.

Pono ke kaulike o Engineers ka ikaika ikaika, commotibility, a kau pale Ke kohoʻana i nā mea.

Nā mea maʻamau no nā nozzles cone piha

5. Nāʻano o keʻano cone piha

Hiki ke heluʻia nā nozzles piha piha e pili ana i kā lākou kūloko kūloko, sharay kumu, a me nā hiʻohiʻona hana.

ʻOiai e hana i nā mea āpau i hoʻopaʻaʻia, Hoʻopili nui ka hoʻolālā kūloko i ka hoʻokaʻawaleʻana i ka nui, ʻO ka lole, a me ka hana ikaika.

ʻO nā'āpana Axial-Fold Cone nozzles

I nā hoʻolālā hoʻohui Axial-kahe, ke komoʻana o ka wai i ka nozzle ma luna o kona koi a kuhikuhiʻia i loko o ka Swarl Keliʻi Ma mua o ka neʻeʻana ma o kahi orifice circular.

• Nāʻano hiʻohiʻona: ʻO ka hoʻokaʻawaleʻana i ka unahi, ʻO nā nui o nā'āpana nui-medium-to-nui, Nā kahe ākea ākea.
• Noi: Nā hale kūʻai, scarbbing, Hono ahi.

Kahe-kahe (Vane-type) Piha piha cone

I nā hoʻolālā hoʻolālā, wai e komo i ka lumi swl ma waena nā slots tangential a iʻole nā ​​kahawai, Ke hoʻopiʻi nei i ka ikaika ikaika ikaika.

• Nāʻano hiʻohiʻona: ʻO ka hoʻolahaʻana, clg-resistant ma muli o nā paila nui.
• Noi: ʻO ka holoi holoiʻana, nā mea hana loiloi, ʻO ka pale lepo lepo.

Spine piha cone nzzles cone

Hoʻohanaʻo Spiral nozzles a helight geometry Ma kahi o kahi keʻena swirl, wāwahi i ka wai i loko o nā'āpana he nui.

• Nāʻano hiʻohiʻona: ʻO ka paleʻana, nā kihi ākea ākea (a hiki i 120 °), ka mālama haʻahaʻa.
• Noi: Flulue gaslfuization (Fgd), mokulele no ka noho ai, ʻOluʻolu o nā kīʻaha wela.

Imph-impact cone nozzles piha

ʻO kēia mau nozzles e nānā i ke kaheʻana i loko o kahi conerwer me ke kiʻekiʻe kiʻekiʻe.

• Nāʻano hiʻohiʻona: ʻOihana kiʻekiʻe, Nā pahu nui, ikaika ikaika.
• Noi: ʻO ka hoʻopauʻana i nā milla kila, ʻO ka hoʻomaʻemaʻeʻana i nā papa, nā hana uila.

ʻO nā nozzles cone piha

ʻO kekahi mau hoʻolālā e hoʻopiliʻia no nā noi Niche:

• Maikaʻi maikaʻi i nā nozzles cone piha: Hana i nā'āpana liʻiliʻi (Dv50 < 100 }m) No ka hoʻohaʻahaʻa a iʻole ka hanaʻana.
• ʻO ka laulā ākea ākea cone nozzles: E uhi i nā wahi nui me nā kihi pīpī a hiki i ka 120 ° no ka lepo lepo.
• Anti-clg piha cone nozzles: Hiʻohiʻona nui i nā'āpana manu manu e lawelawe i nā slurries a me nā flibers i ka waiʻole.

6. Nā hana hana o ka cone cone piha

ʻO ka hana a me ka loaʻaʻana o kahi nozzle cone piha piha loa i hoʻoholoʻia e kona hana hana hana, ʻO nā mea kūpono kūpono i ka dimensional pololei, paulapua, kahe kahe, a kau pale.

Kauhi

• Ke kaʻina hana: Palapala Molly (ʻO ka kila maʻalahi, hae hao, a iʻole bronze) ua nininiʻia i loko o ke one a iʻole waiwai kūʻai Ua likeʻo Monod i ka geometry nozzle.
• Loaʻa:

• • Kumukūʻai-maikaʻi no nā nozzles nui (>50 MM Orifice).
  • Aeʻae i nā keʻena swirl swirl kūloko e hanaʻia.

• PAHUI:

• • Ka paakiki (Ra 3-6 μm) e koi paha i ka post-techning.
  • Pono e kāohiʻia nā mea wela.

• Noi: Pono Kahu Hōʻailonaʻoluʻolu, Nā Scrubbers Scrik, Nā'ōnaehana kaumaha-hana.

Hoʻoheheʻe ʻia

• Ke kaʻina hana: Kakauku (E.g., PP, Pvdf, Ptfe, nylon) e hoʻoheheʻeʻia a iʻoleʻia i loko o nā pale mua.
• Loaʻa:

• • Ka nui, ʻO ka hana haʻahaʻa haʻahaʻa o nā nozzles liʻiliʻi (<20 mm).
  • Kūlike geometry, ʻO nā papahele kūloko.
  • Ke kū'ē neiʻo Corrosioni i nā maʻi a me Alkalis.

• PAHUI:

• • Kaupalenaʻia i nā plastics a iʻole nā ​​mea hoʻohui.
  • Ke paleʻana i keʻano ma lalo o nā metala (makaukau ≤150 ° C).

• Noi: E hoʻomoʻa ana i ka huluhulu, meaʻai & Kāohiʻia, mokulele no ka noho ai.

Machimen

• Ke kaʻina hana: Cnc huli, MilightʻAʻole, a me ka drilling e hana i ke kino nozzle a me ke keʻena shorl kūloko i loko o ka stock bar.
• Loaʻa:

• • Hale Kiʻi Nui Nui (± 0.01 mm).
  • ʻO ka hoʻopauʻana o keʻano kūpono no ka hoʻokaʻawaleʻana.
  • Hoʻololi no ka prototyting a iʻole nā ​​kauoha maʻamau.

• PAHUI:

• • ʻOi aku ke kumukūʻai kiʻekiʻe ma kēlā me kēia papa.
  • Kaupalenaʻia no nā geomex paʻakikī loa keʻole i hoʻohuiʻia me ka edm (Mīkini hoʻolele uila).

• Noi: Nā nozzles kiʻekiʻe no ka descaling, Hono ahi, pāpale.

ʻO ka hana wela

• Ke kaʻina hana: Pili i nā nozzles mezzles ma hope o ka hoʻoleiʻana a iʻole machining (E.g., Queech, huhū, nitriding).
• Hana hana:

• • Hoʻonui paʻakikī (a hiki i 40-50 hrc no nā mea kanu lāʻau).
  • E hoʻomaikaʻi i ke kū'ēʻana i ke kaheʻana ma lalo o ka kahe abumeive.
  • Hoʻonui i ke ola momona ma lalo o nā kūlanaʻo Cyclic Spray.

• Noi: Metralurgy, mining, ʻO ka hoʻomaʻemaʻe kiʻekiʻe.

Mālamaʻona

• Ke kaʻina hana: Nā lole a me nā hana hana e like me uilaiauliwi, Pvd (ʻO ka waihoʻana i ke kino kino), a iʻole nā ​​lole ceramic.
• Hana hana:

• • Hoʻemi i ka friction a me ke kaomiʻana i ka hāʻuleʻana o ka nozzle.
  • Hoʻomaikaʻi i ke kū'ēʻana (chrlodes, Nā'āpana, Ke wai wai).
  • Hoʻonui i ke ola lawelawe i nā wahi e pili ana (slurries, ALOHA OLE ALOHA LOA, lepo).

• Noi: ʻO Marine Scorgbs holoholona, nā mea hana loiloi, flulue gaslfuization (Fgd).

7. Loaʻa a me nā kaupalena o ka cone cone piha

ʻO nā palapala cone piha cone piha i nā mea hana spray, kaulike Nā uhi uhi uhi, Kuʻi Kū'ē, a me ka hoʻololiʻana, Akā he mau palena kūpono lākou.

Loaʻa

• Nā uhi uhi uhi: UC = 80-100%, Hoʻopau i nā wahi make make. I ka mahiʻai, hiki ke hōʻemi i ka hoʻohanaʻana i ka uku ~ 15%; hui mau Nfpa 13 nā kūlana i ka pale ahi.
• ʻAno ʻano: Kau aku i nā wai wai mai 1 cp i 10,000 kepana, a me nā mahana mai -40 ° C (Ke Kūpono Elastomer) a i 1,600° C (Nā Kūlana).
• Kuʻi Kū'ē: Nā mea nui aku a me nā hana a swirl e ho'ēmi i ka paleʻana i ka clogging e ~ 40%.
• Nā hopena kaulike: 0.1-2 nā hopena kūpono kūpono kūpono no ka hoʻohanaʻana a me nā noi hoʻomaʻemaʻe maikaʻi.

PAHUI

• Overspray: 10-15% Overspray, ʻoi aku ma mua o nā nozzles fut (~ 5%), e pili ana i nā hana kūpono.
• Ka hopena haʻahaʻa haʻahaʻa: ʻAʻole hiki ke hoʻokūkū i nā nozzles strol bream no ka hoʻomaʻemaʻe kaumaha.
• ʻO ka nānāʻana: Hiki paha i ke kihiʻo Spiray 5-10% me ± 10% ka hoʻololiʻana.
• ʻO nā wai hua kula kiʻekiʻe: Nā huehue >5,000 Ponoʻo CP i ka hoʻomehanaʻana a iʻole ke kiʻekiʻe kiʻekiʻe no keʻano o ka lole.

8. Ke noiʻana o nā nozzles cone piha

Ua hoʻohana nuiʻia nā nozzles cone nozzles ma kahi o nāʻoihana ma kahi ʻO ka hoʻokaʻawaleʻana i ka wai, hopena hopena, a me clog resistance he koʻikoʻi.

ʻO kā lākou mea paʻa paʻa e hōʻoia i kēlā me kēia wahi i loko o ka wahi i loaʻa i ka wahi i loaʻa i ka nui o nā wahi, e hana ana iā lākou no ho'ōla, ʻO ka hoʻomaʻemaʻe, Ke kālepaʻana, a me ke ahi ahi.

ʻO ka hoʻomaʻemaʻeʻana i kaʻoihana

• Nā hale kūʻai: ʻO ka māhele wai wai ma luna o nā'āpana hoʻopiha e hoʻopiha i ka hoʻoili wela.
• Flulue gaslfuization (Fgd): Piha piha cone nozzles e hoʻokomo i nā hoʻonā alkaline e wehe i nā mea kanu mana.
• ʻO nā mea kālepa wela: Mālama i nā mea hana mai ke kaumaha o ke kaumaha e ka lole maloʻo.

ʻO ka hoʻomaʻemaʻe a me ka hoʻomākaukauʻana

• Mālamaʻona: Hoʻohanaʻia i loko o nā mea hoʻohana, Nā'Ka, a me nā paila polike e wehe ai i nā'ōpala i hoʻopau i nā lepo, noho, a scale paha.
• ʻO nā ihoʻana i nā mea kanu waina: Ua hoʻopiliʻia nā wai inu abrasive no ka hoʻokaʻawaleʻana, ʻO ka mālamaʻana mai ka hopena o ka cone piha piha a me nā hoʻolālā clog-resistant.
• Meaʻai a me ka hoʻomaʻemaʻe inu: 316L stainless stielless sweel fene cone cones e hoʻokō i nā kūlana maʻemaʻe no ka holoi holoiʻana, nā popala, a me ka hoʻoponoponoʻana i nā lako.

Ke ahi Keʻena

• Ua hoʻohana nuiʻia nā nozzles piha piha Nā'ōnaehana ahi ahi (Nfpa 13 Kamana), Hāʻawi i ka rapid a me nā uhi i nā wahi ākea a me nā mea i hoʻopiliʻia.

Agriculture a me ka horticulture

• ʻO ka noiʻana a me ka noi fertilizer: Mālamaʻiaʻo Contical Spirari e hōʻoia i ka uhiʻana o nā mea kanu i ka wā e hōʻemi ai i ka hoʻopauʻana.
• Humodition: No nā greenhuss a iʻole nā ​​superling prophigation, Hāʻawi piha i nā nozzles piha cone.

Kemika a me ke kaʻina hana

• Nā mea hana Sharay: E hōʻoiaʻiʻo i ka hoʻokaʻawale houʻana.
• ʻO ka pale lepo lepo: E uhi i nā wai āpau i uhiʻia a iʻole nā ​​belts o ka laweʻana e hōʻemi ai i nā'āpana mokulele.
• Nā noi: Noiʻia no ka waihoʻana i nā wai wai o nā wai a iʻole nā ​​pilikia i nā laina hana.

9. Nā hana maʻamau maʻamau a me nā pilikia

10. Hoʻohālikelike i nāʻano nozzle nozzle

11. ʻO ka loiloi koho no nā mīkini a me nā mea kūʻai aku

• Pono ke kaʻina hana: E kahe ana e pono ai (L / min), Ke hoʻoikaika ikaika (Bar), hoʻokaʻawale, hoʻolei i kahi mamao, a me ka nui o ka helu.
• Nā waiwai wai: huakai, Viscosity, Pā'ā'āʻaʻia, kuikahi, Ua hoʻokuʻu i nā mea paʻa paʻa & ʻO ka laulā nui.
• Koho koho: E hoʻokūkū i ka Chemistry a me Abrasion (316L, hana, paʻakikī loa).
• Ke hoʻololi nei i ka mīkini: ʻO ka hoʻolālā a iʻole nā ​​mea hana, hoʻohui pole (mesh ≤ 1/3 mea liʻiliʻi loa).
• HAAWINA & Nāʻikekima: E noi iā CV / Q vs ΔP papa, nā palapala papa i nā papa hoʻolālā hoʻolālā a me ka data a iʻole a iʻole VMD Drop.
• Kai hua & Kaiau: E hōʻoia i ka Ozzle nozzle, Loaʻa nā lawelawe lawelaweʻoihana, ʻO nā mea kūʻai aku a me nā wahi hoʻomaha hoʻomaha.
• Kapu kapu: ʻO nā'ōkuhi orifice, Nā poʻo NIZLE FATIBLE no RAPID SWAP-Out.
• Nā koi palapala: Nā palapala hōʻoia (Mtc), hanaʻana i nā mea hana, Hōʻikeʻo QC a me nā palapala hōʻoia e pili ana.

12. ʻO nā iniha hou: Akamai a hoʻopaʻaʻia i nā nozzles piha piha

ʻO ka neʻeʻana o nā nozzles cone piha i alakaʻiʻia e nā hōʻailonaʻeluaʻelua: KahuaOa ito (Iyo) ka hoʻohui a me ke kāohiʻana - nā meaʻelua i manaʻoʻia i ka hoʻomaikaʻiʻana i ka hana a me ka hōʻemiʻana i ka hopena o ka honua.

ʻO kaʻenehanaʻo Vezzle Smart

• Nā meaʻike i hoʻopiliʻia: Piha piha cone mezzles me ke kaomi, keka ao, a me nā kahe e hoʻohuli i kaʻikepili maoli-manawa i kahi mea hoʻokele waena.
  Hiki i kēia ke koho i nā hana hana mua i hanaʻia i nā mea hana hana e pale ai a iʻole ke kapaʻana ma mua o ka hanaʻana i nā hana. Ma kahi mea kanu mana, ʻO nā nozzles smart i hōʻemiʻia i ka downtimed downtime e 30%.
• Kālā Mea: ʻO nā'ōlelo hou o nā cone piha o nā cone piha piha i ka hana ma lalo o nāʻano hana likeʻole (Ka paipai, ʻO ka chocosity fludid).
  Hoʻohana ka poʻe mahiʻai i nā mākau uila e hoʻopili i nā pastictide pesticide sparatters, ka hōʻemiʻana i ka hoʻohana ponoʻana e 20%.
• Hoʻoponopono kūpono: ʻO nā mea uila i hoʻohuiʻia i nā nozzles cone (E.g., Nā kaʻa lechler) Eʻae i ka hoʻoponoponoʻana i kaʻaeʻana o ke kihi (15° -120 °) a me ke kaheʻana i ka helu-kūpono no nā noi noi (E.g., ʻO nā mea hoʻonaninani-wikiwiki).
  Hoʻohanaʻia kahi mea kanu meaʻai e hoʻoponopono i kēia mau mea e hoʻoponopono ai i ka spirang cheray e pili ana i ka mahana o ka huahana, kaʻokiʻana i ka wai wai e 15%.

Hoʻolālā hoʻonohonoho

• ʻO ka Optimization haʻahaʻa haʻahaʻa: ʻO nā hoʻolālā nozzle nozzle (E.g., Nā'ōnaehana'ōnaehana c. LF Sereri) ho'ēmi i ka kahe o ka helu 30% ʻOiai e mālama ana i ka uhiʻana a me UC >85%.
  Hoʻohana kaʻoihana ahi ahi ahi ahi i kēia mau nozzles, Ke mālama nei 500,000 lis o ka wai i kēlā me kēia makahiki.
• Nā mea hana eco-friend: Biodegradable polymer nozzles (E.g., Kahua kaua) ke kūkuluʻia nei no nā noi noi-hoʻohana, e hōʻemi ana i ka pāpū pepa.
  ʻO kēia mau nozzles e hōʻoleʻia i loko o ka lepo i loko 6 mahina, ka neʻeʻana me nā pahuhopu o kaʻoihana.
• 3ʻO ka hana hana D-Printed: 3D paʻi (Ke hoʻohana nei i nā mea e like me ka mea kūʻai aku a me ka cheelless) hiki i ka hana o ka hanaʻana o nā cone cone piha piha me nā mea hoʻokūkū swirl swirl (UC = 95% vsa. 90% No nā nozzles).
  ʻo kahi laʻana, Hoʻohanaʻia kahi mea kanu lāʻau lapaʻau i nā nozzles 3D-paʻi i nā papaʻaina, ka hoʻomaikaʻiʻana i ka huahana huahana e 10%.

13. Hopena

ʻO nā nozzles cone piha i kahi kūpono a hoʻohanaʻia i ka mea i hoʻopiliʻia ka holoiʻana, hopena a iʻole ka uhiʻana koiʻia.

ʻO nā kāne hana maikaʻi maikaʻi pololei nozzle geometry a me nā mea waiwai me ka pohō a me ka hoʻolālā mālamaʻana.

Hanaʻia nā mea hana hou a me nāʻenehana loea i nā mea hana no nā lawelawe a me nā lawelawe kūwaho, ʻOiai e kū'ē ana i ka hana hoʻohui hoʻohui a me ka hōʻikeʻana i nā hana hana hou a me nā uku o ke ola haʻahaʻa.

FaqS

Piha cone vs hollow cone: I ka wa e koho ai?

Hoʻohana piha cone No ka holoiʻana, ʻO ka hoʻomaʻemaʻe a me ka lepo lepo; holio honu No nā hana nui a me nā hana evaporation / evaporation / hoʻomālamalama.

Pehea e hōʻeha ai ka hoʻoikaikaʻana i ka nui?

Hoʻonui kiʻekiʻe i ke kiʻekiʻe o ka haʻaleleʻana i ka wikiwiki, ka hana maʻamau Nā pahu liʻiliʻi.

ʻO ka pilinaʻo ia ka pilina a hilinaʻi hoʻi i nā mea hana orifice a me nā waiwai wai.

Pehea e hiki ai iaʻu ke hōʻemi i ka loaʻaʻana o ka cloggiging?

Hoʻohana multific-oririfically hoʻolālā, Lumi Trainars me Mesh ≤ 1/3 mea liʻiliʻi loa, E koho i nā kiʻi orifice nui i kahi e hiki ai ke kaʻina, a iʻole hoʻohana hana / hoopnoia nozzles.

ʻO ke ola maʻamau no kahi nozzle cone piha?

ʻO ka palapala noi-hilinaʻi. Ma ka lawelaweʻana o ka wai maʻemaʻe i kahi nozzle i halaʻole mau makahiki; I ka lawelaweʻana i ka lawelawe frurry e manaʻo ai i nā hebedoma-mau mahina ināʻaʻole i hoʻohanaʻia nā'āpana cramic / paʻakikī.

Kūkulu i kahi hoʻomaha & Nā hoʻolālā hoʻolālā e like me.