Flat but nozzle | ʻO ka mālamaʻana i ka mea hana nozzle

Hōʻikeʻike

I nā kaʻina hanaʻoihana hou, ʻO ka hoʻokaʻawaleʻana o ka waiʻona e koʻikoʻi no ka hana kūpono, maikaʻi huahana, a me ka mālama kumu kūʻai.

I waena o nāʻenehana SPRAY TREAM, 'ōlelo flat but nozzle kū i kahi o ka mea i hoʻohana nuiʻia ma muli o kona hiki ke hoʻonui i ka lole, Nā hiʻohiʻona linear.

Me nā noi noi kila hānau, ʻO ka hoʻomaʻemaʻe-i kahi (Cipi), mahiai, ho'ōla, a me ka uhi, ʻO nā nozzles fut nozzles e hōʻike i ka nui o nā'ōnaehana shoy he nui.

Hāʻawi kēiaʻatikala i kahi paʻa, ʻO ka nānāʻana i kaʻikepili data-Driven ma kā lākou hoʻolālā, Hana, mea waiwai, noi, a me nā pōmaikaʻi kūpono.

1. He aha kahi pākuʻi fould fan?

A flat but nozzle he mea e hoʻokaʻawale i kaʻenehana, Hoʻokomoʻia ka wai uila, a iʻole slurry-i a ʻelua-dimensional, ʻO ka hiʻohiʻona spect.

ʻAʻole like nozzles e hoʻoheleʻia i ka flumidricilelly wai, ʻO nā palapala Fout Flat nozzles i ka hoʻokuʻuʻana i kahi'āpana, 'Oʻoiaʻiʻo Hoʻokaʻaʻike ka pili, Nā Kūlana Kūlana Kūlana Kūʻai, a ho'ēmi i nā overspray.

ʻEhā mau'āpana nui e hōʻike ana iā lākou:

• Hoʻokaʻawale: 15° -170 °
• Ka Holo Waike: 0.1-100 l / min
• Ke hoʻokō nei: 0.5-200 Bar
• Ka nui o ka drooplet (Smd): 20-1,000 μM

ʻO kēiaʻano hana e kūpono iā lākou ʻO ka hoʻonaninani haʻahaʻa haʻahaʻa haʻahaʻa a ʻo kekahi ʻO ka laweʻana a me ka hoʻomaʻemaʻe kiʻekiʻe.

ʻO ka hanaʻana i ka mana

ʻO ke kaʻina hana Spey Form e hilinaʻi nei ma luna oʻekolu mau ocoenatic fladid phenomani, alakaʻiʻia e ke aliʻi o Bernoulli a me nā hōʻailona kiʻekiʻe:

• ʻO ke kūlana wai: Hoʻokomoʻia ka wai i ka wai i ka lua o ka pono o ka nozzle, Ma kahi o ka turbulence e hōʻemiʻia ma nā channels a cylindrical paha.
  E hōʻoia kēia i kahi paʻa, Lamini (Reynolds helu re = 2,000-10,000) Ma mua o ka hōʻeaʻana i keʻano o keʻano o ka mea hana.
• Sheet: Ua heleʻo Fludid ma o kahi V-Groove, 'Decellelo Sectorial, a iʻole slot-like orifice, ʻO nā reshapes ia i loko o kahi mea, Palapala papa (Kohano: 5-50 μm).
  ʻo kahi laʻana, ʻO kahi V-Groove me kahi papa o 60 ° Angle i ka wai e pālahalaha e hoʻolaha i hope, ʻOiai he pale pale (i hoʻonohoʻia ma 45 ° i ka Orifice) slip i ka kahe wai i loko o kahi pā.
• Kāleka Kahu: E like me kaʻaoʻao o kaʻaoʻao e puka ai i ka nozzle, Hoʻopili ia me ka ea ambient.
  ʻO ka nui o ka lewa a me ka nui o kaʻeha a me ka nui o ka paleʻana i ka'āpana i ka'āpana i loko o nā drotlets (ʻoi aku ka kiʻekiʻe) a me ke kila kila (ʻO nā mea kākau moʻolelo → → nā pahu liʻiliʻi liʻiliʻi).
  No nā noi haʻahaʻa haʻahaʻa (1-5 bar), ʻO ka nui Droplet ka maʻamau 200-500 μM; No ka hoʻomaʻemaʻe kiʻekiʻe (50+ Bar), Ua lele i 50-100 μM.

2. Hoʻolālā hoʻolālā

ʻO ka hana o kahi nozzle flat nozzle e hoʻoholoʻia e kona mau mea hana, ʻO kēlā me kēia i kohoʻia e hoʻoponopono i ka kahe wai, spey unifity, Kuʻi Kū'ē, a me nā mīkini hana.

Nā Kūlana Kūʻai Kūʻai

Inlet cavity

ʻO nā kūlana i loko o ka wai komo i loko o ka wai e ho'ēmi ai i ka turbuglence, ʻO kahi kumu kumu nui o ka pīpīʻole. ʻElua mau papa hana maʻamau:

• Ka capered: He channel chancel me kahi a 15 ° -30 ° angle, hoʻohanaʻia no nā noi kiʻekiʻe (≥50).
  Ua hōʻemi ia i ka nalowale o ka pohō ma 15-20% hoʻohālikelikeʻia i nā cylindrical cylindrical, e hōʻoiaʻiʻo ana i ka kahe nui o ka flaray-forming.
  ʻo kahi laʻana, ʻO nā nozzles kiʻekiʻe e hoʻomaʻemaʻe ana (100 Bar) E hoʻohana i nā hale paʻahao e mālama ai i ka hoʻopiliʻana i ka sparay.
• Cylindrical cavity: He kahua pololei, kumukūʻai-kūpono no ka haʻahaʻa haʻahaʻa haʻahaʻa (0.5-50 bar) nā hana e like me ka mahiʻai mahiʻai.
  E maʻalahi ka hoʻomaʻamaʻaʻana akā hiki ke hōʻike i ka turbuglence liʻiliʻi ma nā koina >30 Bar.

Spray-forming element

ʻO kēia ka "naʻau" o ka nozzle, kuleana no ka hoʻokaʻawaleʻana i ka wai i loko o kahi pā. ʻElua mau hoʻolālā nui:

• V-groove geometry: He wahi ākea v-ich (hohonu: 0.1-2 mm, kūlehu: 30° #O0 °) I ka pono nozzle.
  E pālahalaha ana i nā pā o ka pua, Ke hoʻokumu nei i kahi'āpana uniform. Kūpono kūpono no ka haʻahaʻa haʻahaʻa haʻahaʻa (1-50 bar) a me nā wai maʻemaʻe (ʻAʻole kiko'ī), e like me nā grodves ke clog me nā lepo.
  Hoʻohanaʻia ma nā nogicultural pesticude nozzles (E.g., ʻO ke Hana Nrumet, 80° V-GOOVE).
• 'Decellelo Sectorial: He wahi kīwī / ceramika (Kohano: 0.5-2 mm) kūlana 1-3 mm mai ka Offifice Offifice.
  Hoʻopau i nā kahe wai ma o kahi orifice a iʻole hopena i ka deflector ma 45 ° -60 °, e pālahalaha ana i kahi pā.
  Ka paleʻana i ka clogs (He kūpono no nā mea i hoʻopiliʻia e like me ka wai descaling wai), Hoʻohanaʻia ia i nā noi kiʻekiʻe kiʻekiʻe (50-200 Bar).

ʻO Orifice Orifice

ʻO ka Orifice e wehewehe i keʻano hope o ka Speray a me ke kaheʻana, me nā hoʻolālāʻeluaʻelua:

• ʻO ka Orifice Orifice: ʻAno hoʻohālikelike (tion:Ke kiʻekiʻe) = 5:1 i 20:1, Machined to ±11 mm tolerance.
  E hōʻoia i ka mea e hoʻokele ai i ka spiray (a i 5m), koʻikoʻi no nā noi noi (E.g., Mea Waiwai).
  He 2mm-nui, 0.2Hāʻawiʻo MM-kiʻekiʻe rectangular a i hāʻawi i kahi kihi 90 ° 10 Bar.
• Slot orifice: He pale, linear wehe (tion: 0.1-1 mm), hoʻohanaʻia no nā spiys kihi (15° -30 °) I nā hana kūpono e like me nā mea uila uila.
  E ho'ēmi ia i ka overspray akā pono e koi i nā wai maʻemaʻe e pale i ka clogging.

Pili a me nāʻano hōʻailona

ʻO nāʻano pili likeʻole e pili ana i ka hoʻolālāʻana ma ka hoʻolālā'ōnaehana, Nā Kūlana Kūʻai, a me ke kaumaha loa.

3. Sharay hoʻokō i nā metrics

• Hoʻokaʻawale (Th): E wehewehe i ka laulā. Hoʻoloholo: A 300 MM KAULANA, a 65° Nutzzle uhiʻana ~380 mm laulā.
• Hoʻopau i ka hoʻokaʻawaleʻana: Nā kihi'ā'ī (15° -30 °) ʻO ka hāʻawiʻana i ke kiʻekiʻe kiʻekiʻe i kēlā me kēia pae; Nā kihi ākea (90° -120 °) hoʻolako i kahi pālahalaha, Nā uhi māmā.
• Ka nui o ka drooplet (Sauter keʻano o ka diameter, Smd): Hoʻokomoʻiaʻo Hydraulic Flans Flans 100-600 μM Nā pāpale; Hiki i nāʻano hoʻololi o nā ea i kōkuaʻia 50-200 μM.
• ʻO ka lole: Pono nā hana paʻa-cepeed 30-50% overlap ma waena o nā nozzles nezzles no ka uhi paʻaʻana.

4. Koho maʻamau koho maʻamau o ka pākuʻi fant nozzle

ʻO ka mea o kahi mea e pale ai i ka mea nānā flaray nozzle nozzle pale aku i ka corrosion, oluation, Ka paipai, a me ke ana, ʻO ka weheweheʻana i kāna ola lawelawe a me ke kumukūʻai nui o ka waiwai.

Compateitive table table table table

5. Nāʻano & Nāʻano likeʻole o ka pā uila

ʻO nā palapala Flat Flat nozzles, me Goody, Hoʻolālā Pūnaewele, a me ka hana kumu tailored e kāohi hoʻokaʻawale, ka nui o ka drooplet, hopena, ka uhi uhi uhi, a me ka paleʻana i ka lole a iʻole corrosion.

ʻAno maʻamau

Nā Pūnaewele Flat Flat

• Hana a ʻO ka hui pūʻana o keʻano o ka laulā obtifice holoʻokoʻa, ka mālamaʻana i ka uhi paʻaʻana ma kahi papa hana.
• Nā Mulu Dcadick: Ua loaʻa i ke kaheʻana o Laminar i loko o ka cavity inlelet a reshaped e ka v-groove a iʻole deflector e hana ai a cheerent wai kai.

  

• Noi: ʻO ka hoʻohanaʻana i ka hanaʻana i ka meaʻai, ʻO ka hoʻomaʻemaʻeʻana i ka papaʻaina, a me nā hana hana.
• Nā kihi o nā kihi maʻamau 60° -120 °, me nā kumukūʻai 0.1-100 l / min.

Mai ka pā (Hoʻonuiʻia) Nozzles

• Mea e hāʻawi ka hoʻokaʻawaleʻana i keʻano o ka laulā, ka liʻiliʻi o nā hopena liʻiliʻi a iʻole nā ​​meaʻona.
• Hoʻohui pinepineʻia ʻO ka V-Machid V-Grooves a iʻole nā ​​mea e hoʻokaʻawale ai i nā'āpana'āpana e hoʻokūkū i nā'āpana'āpana.

  

• Noi: ʻO ka hoʻokaʻawaleʻana, Keka, a hui pūʻia (Maemae-in) Pūnaehana.

ʻO nā'ōkuhi lepo lepo lepo lepo

• Nā kihi kīwī 15° -45 °, KA HUINAE ka hopena o ka hopena No ka hoʻomaʻemaʻeʻana o ka ikaika o kaʻili.

  

• Uaʻaeʻia ka manawa pōkole kiʻekiʻe Hoʻopau i nā koena, 'ōlaʻiʻo oxo, a iʻole nā ​​lepo.
• Kālā ikaika: 10-200 Bar; Ka Holo Waike: 0.1-50 l / min.

Nā wahi ākea ākea ākea ākea

• Nā kihi kīwī 130° -170 °, Optimized no haʻahaʻa haʻahaʻa, loko ka nui.
• Pono no ʻO ka pale lepo lepo, irrigation, a iʻole nā ​​noi holoi holoi kahi e hōʻemi ai i ka helu nozzle nozzle e hōʻemi i ka paʻakikī o ka'ōnaehana.
• Kālā ikaika: 0.5-20 Bar; ʻO ka nui o ka droplet maʻamau: 200-500 μM.

  

Nā Kūlana Kūʻai kūikawā

Anti-Dript / Pani i nā nozzles

• Hoʻohui ʻO nā kumuwaiwai kūloko a iʻole nā ​​papa hana kūpono No ka paleʻana i ka lepage flack flaray.
• Koʻikoʻi ma nā noi e koi ai ʻO ka hana pololei, e like me mahiai, nā hale hakakala, a me ka pīpīʻana.

Kōkua-kōkua / Ea-atomizizing found futy nozzles

• Hoʻokomoʻia nā hui uila me ka wai me ka wai ma ka pahu nozzle, Hoʻopili ʻO ka atomizary a me ke kauʻana.
• Hua Nā'ōpio maikaʻi (ʻO Sauer keʻano o ka inoaʻo 20-100 μM) I nā koina maʻalahi, ka hoʻonuiʻana i ka uhi a me ka hoʻomaikaʻiʻana i ka lole.
• Noi: ka uhiʻana kiʻekiʻe, Nā Palapala Kūʻai, a me ka pīpīʻana o ka pesticide.

Slotted a iʻole pololei flat flat nozzles

• ʻO nā'āpana helu a iʻole nā ​​slot a iʻole slotrifes e hāʻawi ʻO nā laulā ākea nui.
• Hoʻohana pinepineʻia Hoʻomaʻemaʻe nā uila uila, ʻO ka hoʻomaʻamaʻa PCB, a iʻole nā ​​kaʻina hana o nā melemele micro.
• Pono nā wai i loaʻa I mea e pale ai i ka clogging; Hōʻike pololeiʻo Ucise CNC maching.

Ikaika loa / Abrasion-resistant nozzles

• Kūkuluʻia me ʻO nā kila kila paʻakikī, Nā Alloys, a iʻole nā ​​mea i hoʻopiliʻia.
• Hoʻolālā e mālama ʻO nā slurries abrasive, kila hānau, a me ka hoʻomaʻemaʻe kiʻekiʻe (>100 Bar).
• Hiki ke hoʻohuiʻia nā geometries kūloko nā capeed inlet i nā pale a me nā pale E hoʻonui i nā ola.

Hoʻoponopono / Nā nozzles ingchange

• ʻAe hoʻoponopono hoʻoponopono o ke kihi o ka'ā'ī, Ka Holo Waike, a iʻole ka laulā.
• E hāʻawi i ka uila no Ke hoʻololi nei i nā kūlana hana, e like me ka hoʻololiʻana mai ka hoʻomaʻemaʻeʻana i ka hoʻomaʻemaʻeʻana a iʻole mai kahi ākea i ka uhi nui.

Nā hiʻohiʻona likeʻole a me nā koho koho

6. Hana a me ka hanaʻana i ka papa map flut

ʻO ka hanaʻana o ka fr far spiray nozzles nozzles he Ke kaʻinaʻenehana kiʻekiʻe e hui pū ai ʻO nāʻepekema, hana ai, a me ka mana ikaika ikaika.

ʻO kēlā me kēia papa hana-mai ka kohoʻana i nā koho ma mua o ka hopena o ka ho'āʻoʻana i nā hopena hope loa spey unifity, ka mana o ka nui, durability, a me ke kūleʻa / absive resistivance, Ke hana nui nei no nā noi noi kila hānau i ʻO ka hoʻohanaʻana a me ka hoʻohanaʻana i ka meaʻai.

Koho koho a me ka hoʻomākaukauʻana

Nā mea kūʻai aku i kohoʻia Ke kū'ē neiʻo Corrosionion, komo i ka hana, ka ikaika ikaika, a me ke kūpaʻa:

• Hoʻolei kālā

• • Hua ʻO nā'āpana likeʻole o Net-Net Me nā geometries interx, e like me nā cavities inlet, ʻO nā mole, ke kākoʻo a me ke kākoʻo.
  • Minohi ʻO nā kūlana noho, ho'ēmi i nā hana post-Makiko a me ka hoʻomaikaʻiʻana ʻO ka hōʻoiaʻana o ka hōʻoia ma lalo o ke kaomi kiʻekiʻe.
  • Hoʻohana maʻamau no kila kohu ʻole (316L, 17-4 Ph), Nā Alloys, Molol, a wikiwiki, i hoʻopili nuiʻia ma kemika, petrochemimical, a me nā hana hoʻomaʻemaʻe kiʻekiʻe.

• Ua mālama ka pololei

• • Hoʻokomoʻiaʻo ka nui Nā Pīkuhi Propertinies e komo pū me ka ikaika, ʻO ka paleʻana o ka momona, a hopena i ka paʻakikī, e hana ana i nā nozzles kūpono abrasive a iʻole nā ​​noi kiʻekiʻe.
  • Hana i nā mea me Hōʻike i ka hana grain, ka hōʻemiʻana i ka hopena o nā micro-cracks ma lalo hana hou i ka hydraulic a iʻole ke kaumaha.
  • Hele pinepineʻia e ʻO ka hana wela (Hoʻoholo hōʻoluʻolu a paʻakikī paha) e koho ʻO ka paleʻana o ka corrosion a me ka paʻakikī.

• Nā Kūlana: Alumina a iʻole Silikino Carbide Powes ʻO nā mea i hoʻopaʻaʻia.

• • ʻO ka hoʻoiliʻana o ka pauku:

• • • ʻO nā maka keʻokeʻo kiʻekiʻe kaomi ma lalo o ke kaomi and Ua hanaʻia ma ke kiʻekiʻe kiʻekiʻe e hoʻokō i nā kaulike lole a me nā microstructure.
    • He koʻikoʻi nā kumukūʻai o keʻano e pale ai micro-cracking i ka wā o ke cycling cycling a iʻole ka nui o ka uluʻana, ka mea hiki ke hoʻololi i ka hana spiray a iʻole ke ola nozzle.
    • Noi: freasive slurry descaling, mining, a me ka hoʻomaʻemaʻe kiʻekiʻe.

• Nā mea i hoʻopiliʻia nā ptfe: Pili ma nā hana hoʻohālikelike No ka hoʻohaʻahaʻa haʻahaʻa haʻahaʻa.
  Mālama pono i nā pale nā leo a me nā mea ipoʻole, mālama pono i ka hoʻokaʻawaleʻana.

Kālana & ʻO nā mea hana pololei

• CNC Milling & Ke huli: Hana V-grooves, Nā Kūlana Sectorial, a me nā slotoice me nā mea hana ± / 0,01 mm e hōʻoia i ka maʻamau ʻO ka'ā'ī a me ka nui a me ka nui.
• Mīkini hoʻolele uila (Edm): Mālama arifini a iʻole i nā mea paʻakikī paʻakikī a iʻole nā ​​cemics ma kahi o kaʻokiʻokiʻana.
• Laser Micromachining: I hoʻohana no Nā noi micro-scale, e like me nā mea uila a iʻole nā ​​nozzles, ka hanaʻana i nā laulā slot <0.2 mm.
• ʻO ka hoʻopololei & Deburing: Hoʻopiliʻia nā channels kūloko E hōʻemi i ka turbulence, Kāohi i ka hoʻopiʻiʻana i ka debris, a hoʻopaʻaʻia i ka pale pale.

Nā hana kino a me nā pāpale

• Hoʻolauna: Hoʻopili i ke kū'ēʻana o ka corossion o ka mea kila kūponoʻole ma keʻano pale aku i ka chromit chromiumx.
• Pioka: Turmesn carbide, chromium Carbide, a iʻole e hoʻomaikaʻi ai nā mea hoʻonani ceramic Ke kū'ē neiʻo Abrasion i nā wahi kiʻekiʻe a iʻole nā ​​slurry.
• Uilaiauliwi: Hoʻomaikaʻi i kaʻili kino, hōʻemi i ka hōʻehaʻana, a he koʻikoʻi no ʻO nā noi a iʻole nā ​​noi.
• PTFE CATUTINGS: Noi no ka hanaʻana i keʻano a me ka hana anti-lāʻau i loko ka hoʻohaʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa.

Hui a me nā hui hoʻohui likeʻole

• Hoʻohui pololei: E wehewehe i nā papa, nā mea i hoʻopiliʻia, aʻo nā hōʻailona eʻaeʻia e mālama hoʻokūkū'ākau, Shelohi, a me nā lole likeʻole.
• Nā Mea Hana Pūnaewele: Nā mea liʻiliʻi e like me 0.05 mm hiki ke alakaʻi ʻO nā sprays Asymmetric a iʻole ka uhiʻana.
• Nā hōʻailona kiʻekiʻe kiʻekiʻe: 'Āpana Naiʻi (>100 Bar) pono metallic a iʻole nā ​​papa kiʻekiʻe kiʻekiʻe ka paleʻana i ka mahana a me ka hoʻouka kauaʻana.

7. Loaʻa a me nā palena

ʻO nā palapala Flat Flat e hāʻawi i nā pono kūʻokoʻa akāʻaʻole he mea maʻamau keʻano o ke kālepa maʻamau.

Loaʻa

• Nā uhi uhi uhi: UC = 80-100% (vsa. nā leo cone piha: 60-75%), e hōʻemi ana i ka wai wai e ka 10-15%.
  ʻo kahi laʻana, ʻO ka hoʻohanaʻana i nā haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa 12% ʻoi aku ka liʻiliʻi ma mua o nā hiʻohiʻona cone piha.
• Ka hopena: ʻO ke kaomi kūpono eʻae i ka hanaʻana i ka hopena mai kaʻoluʻolu (≤0.5 Bar) e kue (100 Bar), Ke hana kūpono iā lākou no ka hoʻohanaʻana (ka holoiʻana) a me ke kaumaha kaumaha (kila hānau) Nā hana.
• Low aiversporay: ʻO kaʻikepili Fan-Shaped Minor i hōʻemi i ka Flad-Tardit Flud Flok-Studical no ka mea kanu (E.g., Nā Solventsʻoihana) a me nā lole lole kūʻai (E.g., pena pena). ʻO Overspray ka maʻamau maʻamau <5% (vsa. piha-cone: 15-20%).
• Hoʻolālā Hoʻolālā: Loaʻa i nā nui (1/8"-4"), mea waiwai (Ptfe i ka cemic), a me nā mea paʻakikī (0.5-200 Bar), Hoʻoponopono i nāʻoihana Deavers.
• Ka maʻalahi o ka hoʻohuiʻana: Nā koho kiʻekiʻe (Nā Pōʻalima, flange, wikiwiki-disconnect) hiki i ka retrofiting i loko o nā'ōnaehana i loaʻa.

PAHUI

• ʻO ka loaʻaʻana o ka clogging: Nā'ōwili (Ç0.5mm) a me nā v-gritoves e hoʻopiliʻia e clogging me nā kiko'ī (>10 }m) a iʻole nā ​​kolepa (>1,000 kepana).
  Miomi: Nā kānana i nā kānana (5-10 μM) a me ka hoʻomaʻemaʻe maʻamau.
• ʻO kaʻike i ka hōʻino o ka orrifice: Nā scratches a dents paha (0, 0,000mm hohonu) E hoʻokaʻawale i keʻano speran, e hōʻemi ana iā UC ma 20-30%. Miomi: Mālama i nā nozzles me ka mālama; E hoʻohana i nā pale pale pale i ka waihoʻana.
• ʻO ka hana kiʻekiʻe kiʻekiʻe-Viscosity: Nā huehue >5,000 kepana (E.g., nāʻaina momona) hakakā e hana i kahi pale uniform, e alakaʻi ana i ka pīpīʻole.
  Miomi: E hoʻomoʻa i ka wai (hōʻemi i ka viscosity) a iʻole e hoʻohana i nāʻano hoʻololi o ka ea.
• Ka hilinaʻi: E hoʻololi i nā kihi a me ka uhiʻana i ka laulā laulā me ka lōʻihi o ka lōʻihi (E.g., 2m kahi mamao no 90 ° nozzles e pale aku i nā gaps).

8. Nā noi o kaʻoihana o nā nozzle flat

ʻO nā nozzles flat flat Vertitile a me nā mea hana o ka fludi i hoʻohana ma waena o kahi ākea o nāʻoihana.

Metala & He wike

• Noi: Kukui Kekuhi, aluminum, a me nā papa kila'ē aʻe e pono ai i ka wai kiʻekiʻe a iʻole nā ​​slurry spirays e hoʻoneʻe i ke kāʻei, 'ōwili, a iʻole nā ​​lepo.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hāʻawiʻo Flat Fout nozzles Nā uhi uhi uhi, aeʻae i ka desctional resistant me kaʻole o ka'āina ma luna.
• Nā hiʻohiʻona hana: Nā pihi pinepine 50-200 Bar, Me nā'āpana Droplet mai 50-150 μm No ka hana ponoʻana.
• Hoʻoloholo: ʻO nā mea kila kila a iʻole ke kohoʻana a iʻole nā ​​laina o nā laina e hoʻoneʻeʻia ai cemic a paʻakikī paha i hoʻopaʻaʻia i nā nonizz fuel flat i loko o ka slurry abrasive abrasive.

Hoʻomaʻemaʻe a me nā cip (Maemae-in)

• Noi: Meaʻai, hana hānai, a me nā hana lapaʻau lāʻau lapaʻau e hilinaʻi i ka hoʻomaʻemaʻeʻana i ka hoʻomaʻemaʻeʻana o nā tanks, Piping, A e hui pū.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: E hāʻawiʻo Fout Fout nozzles e hāʻawi Ke kāohiʻia i nā kihi (60° -120 °) a me ka hoʻokaʻawaleʻana i ka unahi, Ke hōʻoia nei i ka uhi piha piha i ka wā e hōʻemi ana i ka wai a iʻole ka hoʻohanaʻana.
• Nā mea waiwai: 316L stainless strael or ptfe inserts i hoʻohana maʻamau no Ke kū'ēʻana i keʻano a me ke kūpaʻaʻana.
• Hoʻoloholo: ʻO nā'ōnaehana CIP ma nā laina hana Dairy e hoʻohana i nā Nīkini Floust no ka hoʻomaʻemaʻeʻana i nā kila kila e hoʻomaʻemaʻeʻole ai.

Pāpale & Mālamaʻona

• Noi: ʻO ka pīhoihoiʻana, Nā pāpale, nā hashes, a iʻole nā ​​lubricants i nā huahanaʻoihana, nā'āpana automotive, a me na uila.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hoʻokomoʻiaʻo Flat nozzles Forezzles wili, nā'āpana kiʻi kiʻi, E hoʻopau pono i ka paleʻana i ka paleʻana i ka pale a me ka hoʻemiʻana o nā overspray.
• Nā hiʻohiʻona hana: Hoʻohaʻahaʻa i nā koina medium (1-20 Bar) me nā'āpana maikaʻi maikaʻi (20-100 μM).
• Hoʻoloholo: Ua hoʻohana nā laina paʻi kiʻi Automotive V-Groove Stielless Steel a iʻole nā ​​mea nānāʻole i nā nozzles No ka mea maʻamau a me ka noi noi.

Ho'ōla & Queech

• Noi: Rapid ukiuki o nā metals, aniani, ilikai, a me nā huahana meaʻai.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hāʻawi nā wahi ākea ākea ākea ākea ʻO nā lole lole lole lole, e hōʻemi ana i nā mea kanu a me ka hōʻemiʻana i ke kaumaha a iʻole ke kauaʻana.
• Nā hiʻohiʻona hana: Nā Kūlana 2-50 Bar; Droplet nui 100-500 μM no ka hoʻololiʻana i ka wela wela.
• Hoʻoloholo: Mau nā laina e hoʻohana ana i nā laina no ke kila e hoʻohana i nā nozzles flat flat i mālie maikaʻi loa, pale aku i nā cracks a me ka deformation.

ʻO ka pale lepo lepo

• Noi: Mining, kūkulu hoʻi, cement, a me nā lako hana waiwai nui.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hoʻokumuʻia ka Flat Found Nā papa lole kūponoʻole e hopu i ka lepo hau o ka lewa me ka hoʻohanaʻoleʻana i ka wai.
• Nā hiʻohiʻona hana: Haʻahaʻa loa i ke kaomi medium (1-20 Bar) me nā drplets maikaʻi (50-200 μM) no ka ʻO ka lepo lepo nui.
• Hoʻoloholo: Nā mea kanu cement e hana i nā nozzles fuel nozzles ma luna o nā belts conveyor a me nā pale mālama e hōʻemi ai i nā emissions.

Mahiai

• Noi: Hai, herbide, a me ka fertilizer.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hāʻawiʻo Flat nozzles eʻaeʻia ka uhiʻana i nā'āpana a puni nā lau a me nā mea kanu, Hoʻemi i ka pauʻole, a hoʻopaʻa i ka drift.
• Nā mea waiwai: keleawe, kila kohu ʻole, a iʻole nā ​​mea i hoʻopiliʻia ma luna commotibility.
• Nā hiʻohiʻona hana: E kaomi 1-5 mau pahu; Nā kihi mau kihi 60 ° -110 °; drooplet nui 200-500 μM.
• Hoʻoloholo: ʻO BOOM SpIRYERS NO KA WAHINE CRUPS FORE ʻO ka Flaram Flar Flay Fucray nozzles mālama nā helu noi noi.

Nā holoi holoi & ʻO ka hoʻomaʻemaʻe papa

• Noi: ʻO nā'ōnaehana holoi holoi kaʻa kaʻa kaʻa a me nā lako hana maʻamau.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: Hāʻawiʻo Flat Fout nozzles ʻO ka hoʻokaʻawaleʻana i ka māhelehele a me ka nui o ka wai, ka hoʻomaikaʻiʻana i ka hoʻomaʻemaʻe hoʻomaʻemaʻeʻana i ka wā e hōʻemi ana i nā scaks.
• Nā hiʻohiʻona hana: Nā Kūlana 2-10 Bar; ʻO nā'āpana ākea ākea ākea no ka uhiʻana o ka papa.

Mea uila & Nā noi kūpono

• Noi: Ho'ōla, ʻO ka hoʻomaʻemaʻe, a iʻole nā'āpana uila i nā'āpana uila uila.
• ʻO ka hoʻomaikaʻiʻana o keʻoihana: ʻO nā'āpana FUT Flat Fout nozzles i hoʻopaʻaʻia me nā slowro slot a iʻole nā ​​hoʻolālā v-groove ʻae Ka nui o ke kāohiʻia (20-50 μm) a me ka mines overspray, koʻikoʻi no nā mea koʻikoʻi.
• Hoʻoloholo: Papa papa helu Kānāwai (PnB) ʻO ka hoʻomaʻemaʻe hoʻomaʻemaʻe Ptfe a iʻole nā ​​kila kila micro-nozzles No ka hōʻoia pono i ka uhi lole loleʻole me kaʻole o nā mea i hōʻinoʻia.

9. Hoʻohālikelike me nāʻano'ē aʻe o nā nozzles

Nā Hōʻailona / Hemahema:

• Nā Niazzle Flat excel in ʻO ka uhiʻana i ka uhiʻana i ka laulā a me ka laulā ākea, e hana ana iā lākou no Mālamaʻona, pāpale, a me nā noi agricultural.
• Hollow Cone Nozzles ua kūpono no nā mea i kohoʻia a iʻole nā ​​hana e koi ai i ka hoʻohanaʻana i ka hoʻohanaʻana.
• Piha piha cone Hāʻawi ʻO ka uhiʻana o ka nui akāʻaʻole i emi iki no nā papa laina.
• Ka ea e waiho ana i nā nozzles Hāʻawi ʻO ka hoʻokele Ultra-maikaʻi maikaʻi akā,ʻikeʻia e clogging a loaʻa i nā uku haʻahaʻa haʻahaʻa.

10. Hopena

'Ōlelo flat but nozzle heʻanoʻenehana a me nāʻenehana spray, ke kau nei i ka gap ma waena o ka hoʻomaʻemaʻe kiʻekiʻe a me ka laulā, Nā uhi uhi uhi.

Kona hilinaʻi, Hoʻoponopono i nā lako, a me nā pae o nā hoʻonohonoho e hana ai core ka mahele o nā'ōnaehana sporayrial sprays.

ʻO ka koho ponoʻana nozzle, Holo, waiwai, a me ka hoʻolālā hoʻonohonoho-hiki ke hōʻemi i ka wai a me ka hoʻohanaʻana i keʻano 10-30%, hoʻomaikaʻi i kaʻike huahana, a hoʻonui i nā lako hana.

FaqS

Ehia mau manawa e hoʻololiʻia ai nā nozzles flat?

Hōʻike Manaʻo; ke hoʻololi i ka wā e kū ai nā kahe ± 10% a iʻole e hoʻokaʻawale i nā koina o Angle. ʻO ke Ola lawelaweʻoihana: 1-3 mau makahiki (meaʻole), 5-10 mau makahiki (hana).

No ke aha e hoʻohana ai i nā nozzles cemic no ka mea kila kila?

Ua paleʻo Cerramics, mālama mau i nā kihi kuʻekuʻe a me ke kaheʻana i ka 100-300 bar me ka subsive scasive.

Pehea wau e koho ai i ke kihi kūpono kūpono no kaʻu noi?

Koho i ke kauʻana ma luna o ka lōʻihi o ka lōʻihi a me ka laulā, me ka hoʻohanaʻana i keʻano: ʻO ka laulā ākea (W) = 2 × He kahi mamao (D) LOVER(I / 2). ʻo kahi laʻana:

• 2m kahi mamao + 90° Angled = 2m uhi laulā (Kūpono no nā belts conveyor);
• 5m kahi mamao + 170° Angle = 11.4m cwenk (Kūpono no ka Dorfording).
  Nā kihi'ā'ī (15° -30 °) no nā hana kūpono; Nā kihi ākea (120° -170 °) No nā papa nui.

He aha nā mea e pono ai iaʻu e hoʻohana i nā wai corrostive (E.g., 20% hydrochloric acid)?

Ptfe a pvdf. Ua pukaʻo PTFE i nā maʻi āpau (komo 98% sulfuric acid) a hiki i 260 ° C, ʻOiaiʻo PVDF e hāʻawi i nā mea maikaʻi loa no ka piliʻana i nā wai me nā'āpana liʻiliʻi.

316L ss cos corrode in >10% HCL i loko 6 mahina, No laila e pale aku iā ia no nā maʻi ikaika.