ʻO ka mea kanu kila: ʻO ka hoʻopiliʻana i ka hoʻopiʻiʻana i nā hopena

1. Hōʻikeʻike

ʻO keʻanoʻonoʻole ʻoi aku ka nui o nā mea i hoʻokaʻawaleʻia e ka waiʻole, maikaʻi huahana, a me ka palekana palekana ma waena o nāʻoihana hana.

Mai ka hanaʻana i nā molts ultra-maikaʻi i nā lāʻau lapaʻau lāʻau lapaʻau e hāʻawi i nā hale kiʻekiʻe e hāʻawi ana i nā mea kūʻai kiʻekiʻe a me nā mea kanu manu, ʻO nā inoaʻo Strienless Vezles e unuhi i nā loina Engineering i loko o ka hana hana.

ʻAʻole like me nā kāleka kāleka a iʻole nā ciffarts paha, ʻO nā mea kūʻai aku nā mea kūʻai aku Mechanical, Ke kū'ē neiʻo Corrosionion, a me ke kūpaʻa hygiene, e hana ana iā lākou i loko o nāʻano misionion-koʻikoʻi.

Ma ka Haku Nā Mulu Dcadick (Ka Holo Waike, hoʻokaʻawale, ka nui o ka drooplet) and metralurgy (Nā helu helu, paulapua, ʻO ka hana wela),

ʻO nā Veelless Steel Nozzles e hāʻawi Ke kaulike nei, hilinaʻi, a me ka hana lōʻihi ʻOiai ma lalo o nā kūlana koʻikoʻi e like me nā wela cryogenic, Nā hoʻoikaika kiʻekiʻe, a iʻole e hōʻike i ka hōʻike chessive.

2. He aha kahi mea kila kila?

A ʻO ka mea kanu kila he mea hana kūponoʻole i hoʻolālāʻia e hoʻokele i ke kuhikuhi, Ka Holo Waike, huhalau, a me nā hiʻohiʻona spray o nā wai wai a iʻole nā hau e like me ka pukaʻana i kahi'ōnaehana pick.

Ma kānaʻano, nā hana nozzle e like me ʻO nā'āpana wai, Ke hoʻololi nei i ke kaomi static i loko o ka ikehu dynamic, ma laila e hana ana i nā spiys, Jots, nā Miss, a iʻole nā mea i hoʻopiliʻia no nā koina o nā hanaʻoihana.

Mai kahi hiʻohiʻona noʻonoʻo, nā hana nozzle ma nā kumu o ʻO nā Dumid Dynamics a me Spiray Science.

Ka geometry o ka nozzle-inā convergent, divergent, a iʻole nā mana nui-arifififice ua lawa (Cv), kaomiʻana, droplet size distribution (Sauter keʻano o ka diameter, Smd), and spray angle.

ʻo kahi laʻana, a fine atomization nozzle operating at 3 bar pressure can achieve droplet sizes below 100 }m, critical for applications such as cooling, humodition, a iʻole nā ​​wahieʻole.

3. No ke aha ke kila kila? Nā waiwai waiwai no ka hana nozzle

The performance of a Nzzle is inseparably tied to the material from which it is made.

For demanding industrial environments, kila kohu ʻole (SS) has emerged as the preferred choice due to its unique balance of mechanical strength, Ke kū'ē neiʻo Corrosionion, kūlohelohe, a me ka mea hana.

Ke kū'ē neiʻo Corrosionion

The defining property of stainless steel is its chromium-enriched passive oxide layer (≥ 10.5% Cr), which regenerates when damaged. This ensures protection against:

• Genenation Corrison (E.g., in water spray systems).
• Pitting corrosion Ma nā wahi waiwai-waiwai (316/316L is particularly resistant).
• Oxidation at elevated temperatures, essential for hot-gas injection nozzles.

Hoʻoloholo: A 304 stainless steel nozzle exposed to neutral water shows a Pahuikawa < 0.01 MM / makahiki, while a brass nozzle under the same conditions degrades 3–5× faster.

Ka ikaika ikaika & E kāʻei i ke kū'ē

Stainless steel offers a high strength-to-weight ratio, koʻikoʻi no erosion-prone applications (E.g., abrasive slurry spraying, high-pressure cleaning).

• Ka ikaika: 316L ~ 170–310 MPa; 410 (martensitic SS) ~ 450–650 MPa.
• Hālulu: can reach 200–350 HB depending on alloy and heat treatment.

This allows stainless steel nozzles to withstand pressures exceeding 400 Bar in ultra-high-pressure water jetting, where polymer or brass alternatives fail.

Cryogen a me ke kūlana kiʻekiʻe

Unlike carbon steels, which lose ductility below -40 ° C, ʻO nā mea kanu lāʻau austetitic (304, 316) retain toughness down to -196 ° C.

At the other extreme, stainless steels can operate safely at temperatures up to 800–900 °C, depending on grade.

This dual capability explains why cryogenic spray nozzles (LIN, LOX systems) and gas turbine injection nozzles alike rely on stainless steel.

Ka hana a me ka hoʻopauʻana

Stainless steels can be precision machined, laser-drilled, or investment cast, enabling complex orifice geometries with tolerances < ±10 μm.

Ko lākou kūlike me uilaiauliwi and Nā hoʻomaʻamaʻaʻana e hōʻoia i nā papa kūloko kūloko, ka liʻiliʻiʻana i ka turbungence, 'ōwaha, a me ka uluʻana o ka microbial.

ʻO nā kīwaha kīwaha kīwaha kīʻole no nā nozzles

4. Nāʻano nozzle & Pehea lākou e hana ai

ʻO nā mea kila ceelless e hōʻikeʻia e hana i nā hiʻohiʻona kūpono, Nā'āpana Droplet, a me ke kaheʻana i nā kumukūʻai no nā noi pili kiko'ī. Ke koho nei ke koho i nā waiwai wai, Ke hoʻokō nei, Aʻo ka hopena i makemakeʻia.

Hollow Cone Nozzles

• Kahi Kahua: Komo ka wai i kahi keʻena swirl, kahi e koiʻia ai ka spid rapidly ma muli o nā vangential vale a iʻole kahiʻano spiral kūloko kūloko.
  ʻO kēia neʻe e hoʻohālikelike ai i ke kahe e puka i ka pukaʻana ma o ka orifice ma kahi liʻiliʻi, ke kaniʻana i ke kani, Ke hana nei i kahi kumu hoʻohālike cone.
  E hōʻoia ka mana o ka Centrifugal e hōʻoia i ka hoʻolahaʻana o ka DroppleT, Ke waiho nei i kahi mea paʻaʻole.

  

• Hana: Hana i nā stplets maikaʻi i hoʻopiliʻia ma ka periphery, me Sauter keʻano o ka diameter (Smd) ʻO ka 80-200 μM i ka 2-5 Bar.
• Noi: Nā hale kūʻai, scarbbing, a me ka lepo lepo, Ma kahi o ka uhiʻana o kaʻaoʻao ma keʻano he mea koʻikoʻiʻo Spray.
• Loaʻa: E hoʻomaʻemaʻe i ka hoʻomaʻemaʻeʻana me ka hoʻohanaʻana i kaʻaiʻana; ʻO ka hana hoʻomaʻemaʻe iho e hōʻemi ana i ka clogs.
• PAHUI: ʻO ka uhiʻana i ka uhiʻana i ke kikowaena ma ke kikowaena; ka nānāʻana i nā loli.

Piha piha cone

• Kahi Kahua: Komo ka wai i kahi keʻena swirl a iʻole i nā mea imppingtement, ka mea e hoʻohiolo ana iā ia ma waena o kaʻaoʻao o ke kauʻana o keʻano o ke kiʻiʻana.
  Hana kēia i kahi paʻa, piha piha piha i kahi o ka density density e like me ke kikowaena o ke kikowaena a hiki i waho, He kūpono no nā noi e koi ana i ka uhiʻana i ka lole.

  

• Hana: Hana i ka hoʻokaʻawaleʻana i ka unahi; SmD maʻamau 100-300 μM e pili ana i ka viscosity a me ke koʻikoʻi.
• Noi: Nā mea poki Bailer, nā mea hana loiloi, ʻO ka pīpīʻana, a me nā'ōnaehana palekana.
• Loaʻa: Nā luna hoʻomalu, ka hopena kiʻekiʻe kiʻekiʻe, kūpono me nā wai viscous.
• PAHUI: ʻO nā hoʻolālā haʻahaʻa haʻahaʻa e pono ai i koiʻia no nā wai wai-laden; hiki ke hana i nā mea kiʻekiʻe ma luna o nā kūlana makani.

Nā Niazzle Flat

• Kahi Kahua: Ua hanaʻia ka wai ma o kahi orifice slotted, i kekahi manawa me kahi pānaʻi defilis a iʻole ka lua, ka hanaʻana i kahi'āpana, ʻO nā'āpana o ka wai wai.
  Ua pālahalahaʻo ka Sher, ka hanaʻana i kahi papa lāʻau e mālama ai i kahi ākea ākea kokoke i waena o ka laulā. Ua hoʻohālikelikeʻia nā kihi o Spray e ka arifice geometry a me ke kahe wikiwiki.

  

• Hana: Hoʻokomoʻia nā helu stop; Ua hoʻoponoponoʻo SPY a me AFLEL mai 15 ° i ka 120 °.
• Noi: Kaʻiʻana, Ka holoiʻana, irrigation, a me ka noi pesticide.
• Loaʻa: Lehulehu, ʻO ka uhiʻana i ka uhiʻana ma luna o kahi wahi linear; E maʻalahi e hoʻonohonoho i nā waihona kālā no nā pale o ka papa.
• PAHUI: Loaʻa i nā kihi o nā mea hoʻokūkū i loaʻa i ka uhiʻana; ʻO ka pilikia o keʻano he mea e hoʻopili ai.

Ke komoʻana i nā nozzles

• Kahi Kahua: Hoʻohana i ka ikaika o waho, e like me ka hau a iʻole ka steam, e wāwahi i ka wai i loko o nā driplets maikaʻi.
  ʻO nā mea kōkua i kōkuaʻia e nā mokulele e kōkua i ka wai me nā kahawai o nā ea kiʻekiʻe, Ua hilinaʻi nui nā mea hoʻokele mokulele i ka nui o ke kino o ka wai e hoʻokō ai, a me nā mea e hoʻopili ai i nā atomizer i nā mea i hanaʻia i kahi mea piezoelectric e hana ai i nā driplets maikaʻi loa.
  Hāʻawi kēia i ka mana kūpono o ka nui o ka nui a me ka nui.

  

• Hana: Hiki i ka SMD ke hiki i ka 10-50 μm no ka Ultra-maikaʻi SPERY, Kūpono no ka hoʻohaʻahaʻa a iʻole ka hanaʻana.
• Noi: Hoʻopili i ka maloʻo, Hoʻokaʻawaleʻia huaʻai, Kāleka, a me nā'ōnaehana hilinaʻi.
• Loaʻa: Hana nui i nā pahu maikaʻi loa no ka evaporation a iʻole ka uhiʻana; pololei ka mana ma luna o ka spiray density.
• PAHUI: Pono i ka ea a iʻole ke kumu o kaʻoihanaʻoihana; ʻoi aku ka kiʻekiʻe a me ke kumukūʻai.

Hopena & ʻO nā nozzles

• Kahi Kahua: ʻO nā pahu cluid e hoʻokūkū me kahi mea i kauʻia a iʻole nā hale kūʻai intersecting, e pili ana i ka wai e hoʻopiliʻia ma muli o ka neʻeʻana o ka manawa a me ka hoʻokaʻawaleʻana.
  Ua hoʻokumuʻia ka spiray ma ka hopena o ka hopena, Ke hana nei i nā pahu o ka honua kiʻekiʻe i kūpono no ka hoʻomaʻemaʻe a me ka mālama kino.

  

• Hana: Droplets ROTER 100-500 μM; ʻO ka hoʻonuiʻana i ka Impact e hoʻonui i ka hoʻomaʻemaʻe a me ka hoʻomaʻemaʻeʻana o ka mīkini.
• Noi: Mālamaʻona, mālamaʻona, a me ka lepo lepo.
• Loaʻa: Ka hopena kiʻekiʻe kiʻekiʻe, kūpono no ka holoiʻana a iʻole ka weheʻana i nā lepo; hoʻonaʻauaoʻono.
• PAHUI: Hoʻopili i nā'āpana i ka wahi kūpono; ʻaʻole kūpono no ka hoʻokūkū hoʻokūkū.

5. Nā hiʻohiʻona hiʻohiʻona & Nā koho koho

• Nā kino & 'Kākoʻoʻana: Hoʻokahi-'āpana vs Nā'ōlelo hoʻololi No ka loli wikiwiki. Hoʻohuiʻia Hale Kūʻaiʻo Spotl, MALEs, Oole impingementy porn E wehewehe i ka hoʻonohonoho spay.
• Nā pilionahana: Npt / bspp / bspt, TR-Clamp (kūleʻa), Iso / asme flanges, Oole wikiwiki-pili.
• Aloha & gasts: Ptfe, PEEK, Epdm, FMM, Ffkm i kohoʻia ma ka mahana / chemistry; ʻO nā noho metala-a-metal (kūleʻa) hoʻohanaʻia no ka laweʻana a iʻole ka lawelaweʻana.
• Anti-clogging: Trainars (60-200 mesh), nā hana hoʻolālā manuahi nui, Oole ʻO ka hoʻomaʻemaʻe iho Nā'ōlelo aʻoaʻo hou.
• Kaohi: Nā AlSIMIRLAPLARI, 'Ākau 60, a iʻole nā hui kiʻiʻoniʻoni i nā libricants ma nā kaulahao (Hōʻalo i nā lubes hydrocarbon ma ka lawelawe oxygen).

6. Nā ala hana, Aiko & Hoʻopau ʻili

ʻO ka hana a kahi mea kūʻai aku o kahi mea kila kila e hoʻoholoʻiaʻaʻole ia e like me ka papa alloy wale nō akā e Pehea e hanaʻia ai, 'ōlelo Loaʻa nā mea i loaʻa, A me ka kūlana hope loa.

ʻO kēlā me kēia mea hana hopena i ka hopena o ka hopena, E kāʻei i ke kū'ē, a lawelawe lawelawe.

Nā ala hana

ʻO ke koho o ke ala hana no nā mea kūʻai aku o nā nozzles i hoʻopaʻaʻia e ka geometry paʻakikī, nā pono kūpono, Ka Hoʻohuiʻana, a me ka nohona lawelawe.

ʻO nā ala nui e komo ai:

ʻO ka paleʻana (Hoʻolei kālā)

• Noi: Palahalaha, hollow-Cone, a iʻole he nui o nā nozzles spirafice i loko o nā paila o lalo.
• Loaʻa: ʻO ke kūʻokoʻa hoʻolālā maikaʻi loa; hiki ke hana i nāʻano hana likeʻole ma kahi papa hoʻokahi.
• PAHUI: ʻOi aku ka kiʻekiʻe o kaʻili (Ra ~ 3-6 μm), koi ana i ka post-machining no nā orridical koʻikoʻi. ʻO nā mea iʻike pinepineʻia nā mea kūʻai aku (± 0.1-0.2 mm).
• Hoʻoloholo: Nā hale kūʻai, Nā'ōnaehana huaʻai lepo.

CNC Mīkini

• Noi: Ua hoʻohanaʻia nā nozzani kiʻekiʻe kiʻekiʻe i loko o ka wahie derel, nā wahi hau, ʻO ka hoʻomaʻemaʻe semiconducor, a me ke kaʻina lāʻau lapaʻau.
• Loaʻa: Nā mea paʻa loa (± 0.01-0.02 MM); E hoʻihoʻi a me ka hanaʻana ma nā wahi nui. Hiki ke loaʻa i nā kumuwaiwai momona maikaʻi no ka hana spirable.
• PAHUI: ʻOi aku ke kumukūʻai kiʻekiʻe no nā geomet paʻakikī; Hoʻonuiʻia ka manawa mach ma muli o nā micro-orgifices (<0.2 mm).
• Hoʻoloholo: ʻO nā inoa hoʻomaʻemaʻe kiʻekiʻe, ʻO nā mea maloʻo, nā wahiʻai manu.

Patder Itallurgy & Mea hoʻohuiʻaha (AmU)

• Noi: Nā nozzles nozzles e koi ana i nā hana lattice, conformal hōʻoluʻolu channels, a iʻole nā hiʻohiʻona hoʻohālikelike nui loa.
• Loaʻa: ʻAeʻia nā hoʻolālāʻole me ka machining (E.g., ʻO nā keʻenaʻo Swirl kūloko). ʻO ka hoʻopiʻi wikiwikiʻana a me ka hana haʻahaʻa haʻahaʻa haʻahaʻa.
• PAHUI: Paulapua (Ra ~ 5-10 μm) pono pinepine i ka polish; ʻO nā mea hana mechanical e hilinaʻi ana i ka maikaʻi o ka maikaʻi a me ka mana a me ka hoʻokele waiwai.
• Hoʻoloholo: ʻO Aerospace Fit Little Injectors, Nā Mea Hoʻolālā Kūʻai Kūʻai, Loaʻa nā mea hoʻokūkū wela wela.

Huahuai & Welding

• Noi: ʻO nā nozzles nui (E.g., kila momi, ʻO ka mea kūʻai aku, Ke ahi Keʻena).
• Loaʻa: Hiki ke hana i nā nozles i loko o ka hoʻokele waiwai mai nā piptes a me nā blanks i hoʻopaʻaʻia. Uaʻaeʻo Wilding i ka hoʻohuiʻana me nā poʻo a me nā minifolds.
• PAHUI: Pono e mālama ponoʻia ka maikaʻi o ka WELD e pale i ka poosity, ʻO ke kūleʻaʻana o ke kalaʻana, a iʻole ka momonaʻole i ka lawelaweʻo Cyclic Service.
• Hoʻoloholo: ʻO Boiler hoʻomaʻemaʻeʻole, Nā'ōnaehanaʻo Redeny, ahi ahi i nā'ōnaehana denuge.

Aiko & Hoʻopau ʻili

'Ōlelo nā mea hana a me ka hoʻopauʻana o kahi mea kila kila kila he mea koʻikoʻi nā mea koʻikoʻi e pili ana spey unifity, kahe kahe, kū'ē kū'ē, a me ke ola holoʻokoʻa.

Ke hoʻokō nei i nā dimensions pololei a me nā papa kūloko e pono ai ke koho pono o Nā hana hana, Ke hoʻopauʻana i nāʻenehana, a me nā kūlana kiʻekiʻe.

Nā mea hana dimensional

• ʻO wehewehe: Kaʻaeʻaeʻia mai nā'āpana koho no ka nozzle, komo Orifity diameter, Lōʻihi, pilenawinui, Akahi kikowaena.
• Nā mea maʻamau ma keʻano hana:

• • CNC Mīkini: ± 0.01-0.02 mm no nā orrities koʻikoʻi; ± 0.05 mm no nā hiʻohiʻona koʻikoʻi.
  • Hoʻolei kālā: ± 0.1-0.2 mm; Ponoʻia ka ukuʻana o Shrink.
  • Mea hoʻohuiʻaha: ± 0.05-0.15 mm; Hiki ke hoʻopaʻaʻia paha ka post-resing.
  • Nā lole / ulding: ± 0.2-0.5 mm; hilinaʻiʻia i ka ulding underting a me ka huiʻana o ka huiʻana.

• Manaʻo Pūnaewele: ʻO nā mea liʻiliʻi loa i loko Orifity diameter hiki ke pili nui i ka kaheʻana o ke kahe (Cv / k-kumu) a me keʻano hoʻohālike.
  ʻo kahi laʻana, a 0.05 mm ka hoʻikeʻana i a 0.5 MM Orifield paha e hōʻemi i ka kahe ma ~ 10%.

Hoʻopau ʻili (Huahua, Ra)

• Mea nui: Ua hoʻopauʻia ka lani furid friction, ʻO ka maikaʻi o ka atomization, kū'ē kū'ē, a me ke kolohe.
• Nā waiwai waiwai:

• • CNC Mīkini: RA 0.2-0.8 μM ma hope o ka pohō pohō; Kūpono no ka feel injection a me ka atomization maikaʻi.
  • Hoʻolei kālā: Ra 3-6 μm; Ua hōʻikeʻia ka machining no nā arifices maikaʻi.
  • Mea hoʻohuiʻaha: Ra 5-10 μm; ʻO keʻano o ke kalaʻana a iʻole ke kalaʻana i ke kaheʻana.
  • Nā lole / ulding: Ra 1-3 μM i waho; Pono paha nā papa kūloko kūloko i ke kāʻeiʻana a iʻole nā electro.

• ʻO nā hana hoʻolālā kiʻekiʻe:

• • Uilaiauliwi: Hoʻopau i nā micro-burrs a hoʻomaikaʻi i ke kū'ē kū'ē. Hiki ke hiki i 0.1-0.3 μm.
  • Peketio: Hoʻemi i kaʻehaʻana, hoʻomaikaʻi i nā spiray spiray.
  • Luoula Anihation: E hoʻopau i nā mea e hoʻopili ai i ka huiʻana a hōʻemi i ka Clogging.

Ka pilina ma waena o ke komoʻana, Hoʻopau, a hana

• Atomization & Hoʻokaʻawale: E hōʻemi i nā papa kūloko o loko e hōʻemi i ka turbulence, e hoʻopuka ana i ka nui o ka finter (Smd) a me nā kihi kūlike.
• Kahe holo helu helu: E hōʻoia i nā mea kūpono e hōʻoia i nā waiwai CV / K-Factor ma waena o nā pūʻulu hana.
• Durability: Hoʻohaʻahaʻa haʻahaʻa haʻahaʻa, oluation, a me ka corrosion, Ke ola nei i ke ola lawelawe.

7. Nā noi o ka mea kūʻai aku mea haoʻole

ʻO nā mea kila ceelless nā mea koʻikoʻi he nui i loko o kahi ākea ākea, Kālepa, a me nā'ōnaehana kaiāulu ma muli o kā lākou mau durability, Ke kū'ē neiʻo Corrosionion, a me ka hoʻokele spinlimon.

Nā papa hana hanaʻoihana

• Ke kālepaʻana: Hoʻohana no ka hana pololei, ho'ōla, a iʻole nā mea nohoʻole. ʻO nā kila Geeller 296 / 316l nozzles e pale aku i nā mea kanu corlistive, Nā'āpana, a me nā kala.
• Nāʻaiʻana & Pūnaehana Steam: Piha piha a me nā cone nozzles cone nozzles e hoʻopili ai i ka wai a iʻole kaʻaiʻana no ka hoʻohanaʻana i ka hoʻololi wela a me ka evaporation.
  Nā memo-to-metal i noho ai i nā nozzles i nā mahana kiʻekiʻe a me ke koʻikoʻi.
• Hoʻopili i ka maloʻo: Hoʻokomoʻia nā nozzles e hana i nā dotra-maikaʻi maikaʻi loa no ka holoiʻana i nā powders, nā hale hakakala, a me nā meaʻai meaʻai, e hōʻoia ana i ka nui o kaʻili o kaʻaoʻao.

Kaiualoa & Ke kāohiʻana

• Scarbbing & ʻO ka pale lepo lepo: Hollow Cone nozzles i nā Scrubbers e wehe i nā mea kiko'ī mai nā kahawai o nā kikowaena expast. ʻO nā hiʻohiʻona Spray e hoʻopili i ka hoʻopili ma waena o nā wai a me nā mea hoʻohui.
• Nā hale kūʻai & Ho'ūoʻa houʻia: ʻO ka Coneffiency kiʻekiʻe kiʻekiʻe.

Meaʻai & Nā Hana Hana

• Nā noi waiwai: ʻO Tri-Clamp Stainless Sweelless Reel Nozzles e hoʻopuka pololei, pāpale, a iʻole ka hoʻokaʻawaleʻana i ka waihoʻoluʻu i nā laina hana, ka hoʻokōʻana me nā kūlana hygiene.
• Spiray cheating & Meaʻakaʻaka hoʻi: E pili pono i nā Nozzles Flat, 'ihani, a iʻole nā elulsions i nā huahana.

Mahiai & Nā noi hoʻolaha

• Hai & Fertilizer spiray: Loaʻa i ka Flat Fan a Hollow Cone nozzles e hoʻokō i nā corerage ma luna o nā huaʻai e ho'ēmi ana i nā overspray a me ka drift.
• 'Ōnaehana: Mālamaʻo Corrosionan-Corticant Verident Veellens e mālama i nā hana lōʻihi lōʻihi i ka hana lōʻihi ma ka wai momona.

Ke ahi Keʻena & Pūnaehana Pūnaewele

• E kāpīpī & Nā'ōnaehana'ōnaehana: ʻO nā cone piha a iʻole nā nīnī e hāʻawi i nā kīʻaha wai kiʻekiʻe-hopena i ka nui o ke kaheʻana o ke ahi no ke ahi ahi i nāʻoihanaʻoihana a me nāʻoihana kālepa.
• ʻO ka hoʻokele waiwaiʻo Hazardous: Hoʻokomoʻia nā Nozzles Steel nozzles i ka hoʻouka kauaʻana i ka wā e hoʻopuka ai i ka Spiray Criray no kaʻaeʻana a iʻole ka hōʻoluʻoluʻana i nā wai wai.

E puka mai ana & Nā noi kūikawā

• Ka Makani & ʻO Biotechnology Piotechnology: ʻO ka hoʻopiliʻana i nā nozzles e hiki ai i ka makahiki, humodition, a iʻole e uhiʻia i nā wahi i hoʻopaʻaʻia.
• Marine & Of 3Ikeha: Corrosionion-resistant inzzles me ka prostweter salkwater e wehe ana i ka holoiʻana, ʻO ka hoʻomaʻemaʻe, a iʻole nā noi noi.
• Mea hoʻohuiʻaha & 3D Pai: ʻO nā inoa o nā Nothless Guilless Guilless RevAcles e hoʻoponopono i ka waihoʻana i ka uku molten a iʻole ka holoiʻana i nā spery.

8. Loaʻa a me nā palena

ʻO nā mea kila ceelless Hoʻohana nuiʻia ma waena o nāʻoihana ma muli o kā lākou hui pūʻana o ka ikaika mechanical, ke kū'ē kū'ē, a me kaʻenehanaʻana.

Loaʻa i nā mea kūʻai aku o keʻano

Corrosion a me ke kū'ē

• ʻO nā helu kila Strienless e like me 304, 316, a me 316l pale i ka oxidation, Nā'āpana, Alkaliis, a he nui nā mea kanu, e hana ana iā lākou i kūpono no ka hoʻoiliʻana, Marine, a me nā noi meaʻai.
• Hoʻoloholo: 316L nozzles mālama i ka ingctitural integrity i loko o 1-10%% mau hopena hydrochloric i nā manawa hana i hoʻonuiʻia.

ʻO ke kiʻekiʻe kiʻekiʻe a me ka hoʻoikaikaʻana

• Hiki ke hana i nā wahi kiʻekiʻe kiʻekiʻe, a hiki i ka 870 ° C (depending on grade), me ka hōʻoleʻole a nalowale paha o ka hoʻokaʻawaleʻana.
• He kūpono no ka atomization Steam, Boiler Spep, a me nā noi hoʻomaʻemaʻe hoʻomaʻemaʻe.

ʻO ka ikaika ikaika a me ke kāʻeiʻana

• ʻO nā mea kila Stoenless Cheal e pale i ka erosion mai nā wai abserive, nā'āpana'āpana-laden, a iʻole nā kiʻekiʻe kiʻekiʻe.
• ʻO nā hana hoʻoweliweli a iʻole nā mea lapaʻau a iʻole nitronic 60 Ua hoʻonui houʻia nā mea i ke ola nozzle i ka lawelawe abrasive.

Ka pololei a me ka kūlike

• Nā mea hana machined a me nā papahele kūloko e hāʻawi pono i nā kumukūʻai kūpono, ka nui o ka drooplet (Smd), and spray angle.
• E hōʻoia i ka hana hou i nā noi koʻikoʻi e like me ka hoʻomaʻemaʻeʻana, Kekuhi, a me nā mea lapaʻau lāʻau lapaʻau.

Hygiene a me ke kūpaʻaʻana

• Hoʻomaʻemaʻe maʻalahi a hoʻomālamalamaʻia, kūpono me nā mea hana a me nā clamp trimp a me ka iso / asme flange standards.
• He kūpono no ka meaʻai, hana hānai, a me nāʻoihana bitech.

ʻO ka lōʻihi a me ka lōʻihi o ke ola ola

• ʻOiai ke kumukūʻai kiʻekiʻe kiʻekiʻe, ʻO nā mea kūʻai akuʻo Stainless Veelless e hāʻawi i kahi ola lawelawe eʻoi aku ma mua o ke keleawe, palaki, a iʻole nā mea koho balota.
• Hoʻemiʻia nā uku haʻahaʻa a me ka mālama mālamaʻana i ka loaʻa kālā ma nā hana koʻikoʻi.

Nā palena o keʻano cheinless

Uku kumu

• ʻO nā nozelless Steel nozzles e uku maʻamau 2-5 ×ʻoi aku paha ma mua o ke keleawe a iʻole nā pale pepa.
• E hōʻoia nui i ka hoʻoponopono, ka mahana kiʻekiʻe, a iʻole nā noi pili.

Ka hikiʻana i ka galling

• Hiki i nā kaulahao a me nā papa hana ma lalo o ka friction, i loko o nā mea kanu lāʻau austentitic.
• Pono e mālama pono i nā mea hana, nā poʻe libriceants (Hōʻalo i nā hydrocarbons i ka lawelawe oxygen), a iʻole nā kaula i uhiʻia.

ʻO ka Erosion i nā wahi abrasive koʻikoʻi

• ʻOiai ke kāʻeiʻana, Hiki i ke kila steelless ke hoʻopau i ka manawa i ka wā i hōʻikeʻia ai nā slurries abrasive koʻikoʻi. Pono e pono paha nā mea hana ikaika.

Nā noʻonoʻo kaumaha

• ʻO ke kila stielless he mea kūponoʻole ma mua o ka alumini a iʻole plastic, i kahi palena paha i nā lako uila.

ʻO ka maʻalahi

• ʻAʻole like me nā nozzles paleʻole, ʻO ke kila steellessʻaʻole i hiki ke maʻalahi aʻaʻole hiki ke maʻalahi a iʻole keʻano no nā kihi kūikawā maʻamau.

9. Ke kohoʻana i nā koho & kahi hiʻohiʻona wikiwiki

• E wehewehe i ka medium (Chemisstry, Nā Solosh, Viscosity, keka ao).
• Koho i ka hana (hoomae, anu, Kāleʻa, ATOMIZE).
• Koho i ke kumu hoʻohālike (Chee, Fan, KOKUO, JET).
• E kahe ana & Ka paipai (K-factor a cv paha).
• Koho i ka papa helu (316L, Duplex, etc.).
• E hōʻoia i ka hoʻopau & Hono.

10. Hopena

ʻO nā Noho'ōleloʻo Stainless Veelless e hōʻike i ke kikowaena o Nāʻikepili hoʻoheheʻe, metralurgy, a me kaʻenehanaʻana.

Me nā koho koho kūpono, paulapua, a me ka hōʻoia hōʻoia, hoʻopakele lākou ʻO ka loleʻo Unifim, ola lōʻihi, a hoʻemi i ka downtime Ma keʻano o nāʻoihana mai ka meaʻai i ka hanauna mana.

ʻOiai e lawe lākou i nā uku kiʻekiʻe kiʻekiʻe, kā lākou durability, Hygiene hoʻokō, A me ka hilinaʻi hana iā lākou i loko o nā kaʻina hana misionion.

FaqS

Hiki i ka hoʻolimalima kālāʻana e hoʻopuka i nā mea kūʻai aku i nā mea haoʻole?

ʻAe-hema (E.g., Npt, Bsp) hiki ke hoʻolei pololei ināʻo ka pitch ka ≥1 mm. No nā kaulahao fine (<1 mm), Loaʻa nā mea loaʻa ma kahi kokoke i kahi kokoke-ʻano a me ka hoʻopauʻana me ka heluʻana.

Pehea e hoʻohālikelike ai ka hāʻawiʻana i ka hoʻopukapukaʻana i ka machining no nā mea kila kila?

He kūpono kūpono ka Maching no nā nozzles maʻalahi akāʻo ke kumu kūʻai no ka hoʻolālāʻana no nā hoʻolālā paʻakikī (E.g., ʻO nā Niahe Number), kahi 50-70% o nā mea i hoʻopauʻia.

Hoʻemi ka kūʻaiʻana i ka waiwai i nā mea waiwai i ka 5-10% a hoʻopau i ka hui o nā māhele he nui.

He aha ka nui o ka nui o ka mea kila kila kila?

ʻO ka hapa nui loa iʻikeʻia ma nā nozzles a hiki i 300 MM In Distnameter (E.g., ʻO nā nozzine nui o Steam Turbine). No nā nui nui (>300 mm), Hiki ke hoʻohanaʻiaʻo Sand Canding, Akā me ka hōʻemiʻana.

Hiki i nā mea kila kila kila i hoʻopaʻaʻia i nā wela cryogen (E.g., Lng a -162 ° C.)?

ʻAe-316l a 304 Mālama i ka ductility ma -196 ° C (ʻaʻohe frittle flack) a hoʻohanaʻia ma LNG Vaporizer nozzles. Āla 321 a < -50° C, E like me ka hoʻomakaʻana o ka Titanium Stabilization.

He aha ka nui o ka piʻiʻana o kahi mea kila kila kila?

Duplex 2205 Hoʻopiliʻia nā Nozzles i 200 Mpa (29,000 Psi) No ka lawelaweʻana o ke kikowaena kiʻekiʻe. Ua heluʻia nā helu 316l nozzles no 10-100 MPA, Ke hilinaʻi nei i ka nui a me ka hoʻolālā.

Pehea e hoʻomaʻemaʻe ai au i kahi kila kila kila?

No ka paleʻana, flush me ka wai mahana + hana. No nā'āpana mineral, e hoʻohana i kahi 5% ʻO ka hopenaʻo Nitric AcID (palekana no ka 304 / 316l). Hōʻalo i nā kāleka kāleka (scratch i ka paina passive).