ʻO nā lawelawe kuʻekuʻe cheels | Prototyess i ka hana

ʻO ka ceel cheelless ceel cuter Hōʻike i kahi holomua holomua i kēia manawa, ka weheʻana i ka hana paʻaʻole a me ka corrosione e pale ana i ka kila kila a me ka pololei o kaʻenehana laser.

Mai konaʻoihanaʻoihana i nā makahiki 1970, Ua holomuaʻo Laser i ka hoʻololiʻana i ka hoʻoili maʻalahi i kahi ala maikaʻi loa e hiki ai ke hana i ka hanaʻana, ʻO nā'āpana kiʻekiʻe ma waena o kahi ākea ākea o nā kila kila a me nā mānoanoa.

E hoʻokeleʻia e nā koi no ka pololei, ka māmā holo, a me nā meaʻona liʻiliʻi liʻiliʻi, Ua lilo kēiaʻano hana i loko o nāʻoihana e like me Aerospace, aitompetitive, Nā Pūnaewele Pūnaewele, ʻO ka ho'ōlaʻana i ka meaʻai, a me ka hoʻolālāʻole.

Ma mua o kona mau pōmaikaʻi, ʻO ke kākoʻoʻanaʻo Stoeselless Cull Cutter Cutting i ke kākoʻoʻana i nā hana hana uila, Ke hāʻawi nei i ka hoʻohuiʻana i nā'ōnaehana me nā'ōnaehana cam / cam, Nā laina hana hana Automated, a me nā'ōnaehana mana maoli maoli.

1. He aha kaʻenehanaʻo Laser Code?

Cuter cuting he leka uilaʻole, ʻO ke kaʻina hanaʻokiʻoki kiʻekiʻe e hoʻohana ai i kahi mea, ʻO ka pāpū laser i hanaʻia e hoʻoheheʻeʻia, 'Ehōʻike, a iʻole i nā mea hana ma ke ala i weheweheʻia.

Ua hoʻohana nuiʻia ia ma nāʻoihana e hāʻawi ana i nāʻoihana mai Aerospace a me Automotive i nā mea uila a me nā polokalamu lapaʻau ma muli o kāna wikiwiki, pololei, a me ka uila.

Koho O ka Hana

Ma kānaʻano, Hoʻopiliʻiaʻo Laser i kahi e kuhikuhi ana i kahi cheerent, ʻO ka nui o nā mea nui loa ma luna o ka papa o ka hana hana.

Ua uluʻia ka pahuʻo Laser i loko o kahi resonator Laser, kahi e hele ai ka uila māmā ma o ka hoʻohemoʻana.

Ke alakaʻiʻia nei ka beam ma o nāʻano o nā aniani a iʻole nā ​​pohō, kahi e hoʻopili ai i kahi liʻiliʻi, wahi kiʻekiʻe loa, ʻoi aku ka liʻiliʻi ma mua o 0.3 MM In Distnameter.

I ka wā e hoʻopili ai kēia mea aloha, Ua hoʻopiʻiʻo ia i ka wahi i kohoʻia i kona wahi e hoʻoheheʻe ai a iʻole ke kuhikuhiʻana.

ʻO ka ikaika o ka ikehu ka mea e hana ai i ka mea e hoʻoheheʻeʻia, 'Ehōʻike, a iʻole he sublimate, eʻae ana i ka laser e hoʻowalewale i ka hana hana me ka leʻaleʻa liʻiliʻi trimal.

Nā mea nui

• LASER SOU: Hoʻokomoʻia nā kumuwaiwai Laser maʻamau, Nā Hana Hana, a nd:Yag mau mea, ʻO kēlā me kēia me nā mea e like me nā mea e pono ai a me nā mana o nā mana e hoʻopiliʻia no nā lako a me nā mānoanoa.
• Kū'ē i nā mea nānā: ʻO nā lensslelo wehewehe a iʻole nā ​​aniani e kū ana i ka beam o Laser e hoʻokō ai i nā mana kiʻekiʻe kiʻekiʻe (a hiki i 10⁶ w / cm²), pono no kaʻoki pono.
• Kōkuaʻo Gas: He wahi coaxial bus (e like me ka oxygen, nitrogen, a iʻole ka hau) i kuhikuhiʻia ma keʻano o ka bear paser e hoʻoneʻe i nā mea molten a iʻole ka vaporized marf mai ka kerf, Ke hōʻoia nei i kahiʻoki maʻemaʻe.
  Keʻano o keʻano kōkua o ke kōkua kōkua i ka cutecing cuding cuck a me ka maikaʻi o keʻano.
• 'Ōnaehana'ōnaehana: Ua neʻeʻo CNC-Motors Motors i ke poʻo Laser a iʻole ka hana hana ma nā ala i hoʻonohonohoʻia, Hoʻopaʻa i nāʻano paʻakikī a me nā hana hoʻohālikelike me ka wikiwiki a me ka wikiwiki.

ʻO kaʻokiʻana i nā mīkini laser

Ke hana neiʻo Laser i nā hana ma keʻano heʻekolu, Ke hilinaʻi nei i nā mea a me nā mea i hoʻohanaʻia:

1. Cusion oki (Hoʻoheheʻe a pā):
   Ua hoʻoheheʻe ka laser i ka waiwai, a me kahi mea i kōkua ai i ke kino (nā nitrogen maʻamau) E huki i ka mea molten ma ke kumu mai ka Kerf.
   Ua hoʻomaʻemaʻeʻia kēiaʻano hana, nā kihi oxide-free, Kūpono no nā kila kila a me ka alumini.
2. Keʻoki houʻana (Clame cutting):
   Me ka hoʻohanaʻana i ka oxygen ma keʻano kōkua, Hoʻomakaʻo ka papaʻo Laser Beam i kahi hopena exothermic me ka waiwai, ka hoʻohuiʻana i ka ikehu i ke kaʻinaʻokiʻoki a hoʻonui i ka wikiwiki, ʻoi aku i nā mea kanu carbon.
   Akā naʻe,, Hiki iā ia ke hopena i nā kihi oxidized.
3. Keʻokiʻia nei:
   ʻO ke kumu waiwai i pololei mai ka paʻaʻana i ka hau me kaʻole o ka melting. ʻO kēiaʻano maʻamau ka maʻamau no nā mea likeʻole-metallic e like me nā plastics, Wood, a me nā hoʻohui, Hāʻawi i nā wahi wela i nā'āpana.

2. Ua hoʻohana maʻamauʻo Laser

ʻO ke koho o ke kumuʻo Laser Source he mea koʻikoʻi koʻikoʻi i ka maikaʻi, o ka kūlana, a me ke kumukūʻai-kūpono o ka ceel cheinless cider cuting.

ʻO nāʻano laserʻokoʻa likeʻole i ka lōʻihi, Mana Hōʻailona, ʻO ka maikaʻiʻo Beam, a me nā hiʻohiʻona hana, e hana ana iā lākou i kūpono no nā noi kiko'ī a me nā mānoanoaʻokoʻa.

ʻO nā kumuwaiwaiʻekolu e hoʻohana ai i nā kumu laser maʻamau i hoʻohanaʻia ma keʻano heʻokiʻoki Nā Hana Hana, Nā Lasares, and ʻO Nd: Yag mau mea.

Nā Hana Hana

• Hauhā: Aneane 10.6 Micrometers (}m)
• Ka hanaʻana i ke kānāwai: ʻO nā poʻe kolo nā mea kūʻai aku i ke kaʻa ma kahi o ke kāwiliʻana o ke carbon dioxide, nitrogen, a he maʻi maʻi maʻi maʻi maʻi maʻi maʻi maʻi maʻi maʻi maʻi e hana i ka kukui laser.
• Nā ikaika:

• • ʻO kaʻenehana paʻa maikaʻi me nā makahiki he mau makahiki o ka hoʻohanaʻana o kaʻoihana.
  • ʻO nā mea kiʻekiʻe kiʻekiʻe e hele mai ana mai kahi mau haneli mau haneli i nāʻumi o nā kilotatts, He kūpono no kaʻokiʻana i nā kila kila.
  • ʻO ka maikaʻi o ka maikaʻi o ka beam e hiki ai i nāʻokiʻoki pololei me ka hoʻopau maikaʻiʻana.

• PAHUI:

• • ʻO nā hoʻonohonoho nui a me nā mea hoʻokūkū nui ma muli o ke kauʻana i keʻano o ka mīkini a me ka hoʻolālā laser.
  • Koi i nā aniani e alakaʻi i ka beam o Laser, hopena i nā pono mālama pono a me nā pilikia kūponoʻole.
  • ʻOi aku ka lōʻihi o nā hopena lōʻihi i ka wā liʻiliʻi ma nā metala, Hiki i ka mea e hōʻemi i kaʻokiʻana i nā mea e pono ai i nā mea noʻonoʻo e like me nā kila stickless.

• Noi: Ua hoʻohana nuiʻia no kaʻokiʻana i nā mea iʻokiʻia i nā'āpana kila, ʻO ka mea e pono ai ka mana kiʻekiʻe.

Nā Lasares

• Hauhā: A puni 1.07 Micrometers (}m)
• Ka hanaʻana i ke kānāwai: Hoʻokomoʻiaʻo Fiber Lasers i ke kukui Laser ma o ka hanaʻana i nā fibers optical i paʻiʻia e Diode Lasers, ka hanaʻana i kahi beam cheent i hoʻounaʻia ma o ka fuber pono'ī.
• Nā ikaika:

• • ʻOi aku ka kiʻekiʻe o nā metala ma muli o ke kau pōkole, ka hanaʻana i nā mea kōkua flaber ma kahi eʻoki ai i ke kila kila.
  • Compact, rousst, a me ka mālama haʻahaʻaʻana mai ka wāʻaʻole he mirrorrs.
  • ʻO ka maikaʻi maikaʻi maikaʻi loa me ka nui o ka manaʻo kiʻekiʻe, Ho'āla i nāʻoki maikaʻi loa a me nā wikiwiki kiʻekiʻe.
  • ʻOi aku ka nui o ka ikaika o ka ikaika.
  • ʻO ka lōʻihi o ka hanaʻana i ka hana me ka liʻiliʻi liʻiliʻi.

• PAHUI:

• • Mālamaʻia ka mana i kekahi mau kilotts, ʻOiai ke loaʻaʻana o nā loina kiʻekiʻe.
  • E koi paha i nā hoʻonohonoho likeʻole a iʻole kōkua i nā hoʻonohonohoʻana i nā wahi i hoʻohālikelikeʻia no nā mea nui.

• Noi: Kūpono no ka lahilahi i ka pākaukau o keʻano o ke kila kila, micro-match, a me nā noi noi e koi ana i ka laulā kiʻekiʻe.

ʻO Nd: Hua (Neodymium-dotrium altrium alumnum garnet) Nāʻoihana

• Hauhā: Aneane 1.06 Micrometers (}m)
• Ka hanaʻana i ke kānāwai: ʻO nā lasus-State Lasers kahi e nd:ʻO Yag Crystal i paʻi maikaʻiʻia e nā kukui uila a iʻole nā ​​diod e hoʻomaka ai a iʻole nā ​​mea nui.
• Nā ikaika:

• • Hiki i nā mana kiʻekiʻe kiʻekiʻe loa i keʻano pulsed, kūpono no kaʻokiʻana a me ka maching.
  • Maikaʻi maikaʻi a me ka hiki ke hōʻoki i nā mea noʻonoʻo e like me nā kila kūpono.

• PAHUI:

• • ʻO ka maʻamau maʻamau a me ka mālamaʻana i ka palekana i hoʻohālikelikeʻia i nā mea hana fibers.
  • Liʻiliʻi liʻiliʻi nā'āpana liʻiliʻi a me ka haʻahaʻa haʻahaʻa haʻahaʻa i hoʻopaʻaʻia i kā lākou hoʻohanaʻana ma keʻoki kiʻekiʻe.
  • ʻOi aku ka paʻakikī o ka hoʻomaʻamaʻaʻana a me nā koi mālama.

• Noi: Hoʻohana pinepineʻia i nā noi kūikawā, e like me kaʻokiʻoki, Welding, a iʻole e hōʻailona ana i nā'āpana kila kūpono i kahi e koʻikoʻi ai ka hopena.

3. No ke aha e koi ai ke kila Stiinless

Kila kohu ʻole, kaulana no kona pale kū'ēʻana, ka ikaika ikaika, a me nā mea hoʻopiʻi Aesthetic, ua hoʻohana nuiʻia ma waena o nāʻoihana e like me ka aerospace, olakino, aitompetitive, ʻO ka ho'ōlaʻana i ka meaʻai, a he'omanaʻo.

Akā naʻe,, ʻO kēia mau waiwai nui loa e hana ai i nā mea kila kila i hōʻikeʻia i kēia manawa.

Nā waiwai waiwai o nā kila kila

ʻAʻoleʻo ia kahi kila stielless he alloy akā heʻohana o nā alloys e pili ana i nā alloys me ka liʻiliʻi 10.5% ʻO kaʻikepili chromium. Hoʻokomoʻia nā waiwai kūʻokoʻa:

• ʻO ka noʻonoʻo kiʻekiʻe: Nui loa ma nā wana infrared lōʻihi i hoʻohanaʻia e nā'ōnaehana laser he nui, Hōʻikeʻo Stiinless Steel i kahi hapa nui o ka ikehu laser,
  ka hanaʻana i nā coam mua e koi aku i kahi paʻakikī a me ka koiʻana i nā mana kiʻekiʻe a iʻole nā ​​mea hana kiʻekiʻe (E.g., nā mea holo wāwae me nā mea pōkole pōkole).
• Low thermal cenmal: Ua hoʻohālikelikeʻia i ke kila carbon a iʻole alumini, ʻAʻole i ka wela o ka mea kila maikaʻi.
  Hiki i kēia ke alakaʻi i ka nui o ke kaʻaila ināʻaʻole i hoʻohālikelikeʻia ke kaʻina hana, ʻO ka hoʻonuiʻana i ka hopena o keʻano o ka torttion a iʻole ka maikaʻi o ka maka.
• ʻO Malking Point Point: Me kahiʻano e like me keʻano o ka 1,400-1,530 ° C, ʻO ke kumukūʻaiʻo Stainless e koi ai i ke kiʻekiʻe o ka ikaika o ka ikaika e hoʻomaka ai a me keʻokiʻana.
• OʻAmeI hana: ʻO nā mea hoʻokūkū maikaʻiʻole e hoʻopaʻaʻia e hana i nā papa chromium-waiwai i nā papa kiʻekiʻe ma nā kiʻekiʻe kiʻekiʻe.
  Me kaʻole o ka paleʻana o ke ahi, Hiki i kēia ke pili i ka ulia a me ka pale i ka hope o ka post-ʻoki.

Nā palena o nā hanaʻokiʻoki kuʻuna

ʻO ka hoʻopiʻiʻana i nā hana hoʻopiʻi e like me ka paleʻana, 'OiEPE, a iʻole ka hanaʻana i ka punchical punching e alo i kekahi mau palena i ka wā i hoʻopiliʻia ai i ke kila kila:

• Hāmeʻa lole: ʻO ka paʻakikī a me ka paʻakikī o ke kila kūponoʻole e hiki i keʻano o ka hana hoʻoweliweli rapid.
• Kālā Brur: E waiho pinepineʻia nāʻano mechanical e waiho pinepine i nā burrs a me nā kihi paʻakikī, e koi ana i nā hana deburring hou.
• ʻO nā wahi wela wela (HAZ): Nāʻenehana e like me ka plasma a iʻole nā ​​meaʻona-oxy-feel eʻoki i nā haz, hiki ke hoʻololi i nā waiwai metallurgical kokoke i kaʻaoʻaoʻokiʻoki.
• ʻO ka hoʻokaʻawaleʻana i ka hoʻolālā: He kūpono nā kaʻina hana mechanical i kūpono no kaʻokiʻana i nā geomet paʻakikī a iʻole ka radii codii me kaʻole o ka mea kūʻaiʻole.

ʻO nā koi kūpono a me ka hoʻomaʻemaʻe

Nui nā hana e hoʻohana ai i nā kila kila i loaʻa i nā mea hana a me nā kūlana aesthetic kūlana:

• Nā Pūnaewele Pūnaewele: Pono i ka burr-free, nāʻokiʻoki-ʻoki manuahi me ka liʻiliʻi liʻiliʻi e hoʻomaʻamaʻa i ka molina.
• Nā lako hana meaʻai: Koi i ka hygiennic, ʻO nā papa hana e pale ai i ke kūkulu hale.
• Nā palapala hana: Pinepine ka hoʻopiliʻana i nā mea hana loiloi a iʻole nā ​​aniani i kālaiʻia e ponoʻole e hōʻinoʻia a iʻole ka'āpana i ka wāʻokiʻoki.

Cuter cuting, I ka wā e hoʻonohonoho ponoʻia, ʻO nā Excels ma ka hālāwaiʻana i kēia mau koi ma ka hāʻawiʻana:

• ʻO ka pololei kiʻekiʻe kiʻekiʻe
• ʻO ka hōʻikeʻike minimal
• Hoomae, nā kihi oxide-free (ka mea nui i ka wā e hoʻohana ai i ka nitrogen kōkua)

ʻO ka hiʻohiʻona hiʻohiʻona a hoʻopau i ka maikaʻi

Ua hoʻohanaʻia nā mea kanu huapalapala he nui, pua, a iʻole e hoʻopaʻaʻia i nā manawa e pono ai e mālamaʻia i ka wā e hoʻoili ai.

ʻO keʻano mechanical escess e hōʻemi ana i ka scratching a iʻole ka hoʻokaʻawaleʻana i kēia mau papa. Cuter cuting, ʻO nā mea nui me nā mea holo lio a me nā poʻo i hoʻopaʻaʻia, Hōʻalo i ka hoʻopiliʻana me ka mea mālama a mālama i ka pono o kaʻaoʻao.

4. ʻO nā manaʻo maʻamau ceel

Nā helu Austetitic (304, 316)

• Nāʻokiʻoki: Ke alakaʻi neiʻo Fuclilight Highs i ka hoʻokumuʻana iā Burr Forest; ʻO ke kaomi nitrogen (2 Mpa) and 1.5 Ua hōʻemiʻo KW Fiber i ka mana o ka Pocker Minumize Burr High to <0.05mm.
• Nā'Āina Kūlana'Aiʻi: 316Lʻoki me ka nitrogen e hālāwai me nā kūlana FDA, Me ka pā kaua < 0.8μM no nā lako lāʻau lapaʻau.

ʻO nā māka martestitic (410, 420)

• Ka hopena paʻakikī: 420 kila kohu ʻole (40 Hrc) pono 20% ʻOi aku ka mana o ka mana laser ma mua o 304 Ma muli o ka hoʻonuiʻiaʻana o ka mālamaʻana.
• Nā noi noi: 410 ʻokiʻia me ka oxygen ma 1.2 m / min hana i nā kihi kūpono kūpono no nā pahi pahi, me nā kihi kihi o 8-12 ° i loaʻa.

ʻO ka helu nui-paʻakikī (17-4 Ph)

• ʻO ka nānāʻana i ka wela wela: ʻOkiʻia i loko o ka'ōnaehana o ka hopena (Kālā A) pale aku i ka paʻakikī i ka haz. Post-cut (H900) hoʻihoʻi i ka ikaika o ka 1,310 Mpa.
• Hoʻohanaʻole Aerospace: 17-4 Uaʻokiʻo PH filal Tank Tank me 5kw Fiber i hōʻike <0.1mm Dimenseation kūpono, ʻO ka hālāwai me nā kūlana kūlike'o9100D.

5. ʻO nā kaʻina hana hana nui i ka ceelle cheinless cider cuter

Ke hoʻokō nei i nāʻokiʻoki kiʻekiʻe ma keʻano o nā kilokilo maikaʻiʻole e hoʻohana ana i nāʻenehana Laser e pili ana i ka mālama ponoʻana i nā'āpana hana koʻikoʻi.

ʻO kēia mau'āpana i ka hopena o keʻano, ka māmā holo, pau, ʻO nā wahi wela wela (HAZ), a me ka hana holoʻokoʻa.

Laster Power

• ʻO wehewehe: ʻO ka mana o keʻano o ka pā o Laser, e ana pinepine i nā watts (W) a iʻole kilotatts (kw).
• Hopena: Hiki i nā Power Power ke hana i nā mea liʻiliʻi e hōʻoki i nā mea hana liʻiliʻi a me nā wikiwiki wikiwiki wikiwiki.
  Akā naʻe,, Hiki i ka mana nui ke hana i ka hoʻoheheʻe nuiʻana, Kākoʻo, a iʻole he wahi wela wela.
• Kaonaʻeha: No ka kila kila, ʻO ka mana Laser i nā manawa he mau haneli (No nā'āpana'āpana) a i 10 kw a keu aku paha (No nā papa lole).

ʻOki wikiwiki

• ʻO wehewehe: ʻO ka helu ma kahi o ke poʻo o ke poʻo a iʻole nā ​​mea hana hana i hana i kēlā me kēia, ʻO ka maʻamau maʻamau ma Millimeters i kēlā me kēia kekona (mm / s) a iʻole mika ma kēlā me kēia minuke (m / my).
• Hopena: Hoʻonui ka hoʻonuiʻana i ka wikiwiki akā hiki ke hōʻemi i ka momona cuke ināʻaʻole lawa ka ikaika o ka laser.
  E lohi loa i kahi wikiwiki e alakaʻi i ka nui o ka wela wela a me ka maikaʻi o kaʻaoʻao.
• Opieahana: Pono kaulike me ka mana laser a me ka mānoanoa o ka mānoanoa no ka hoʻomaʻemaʻeʻana i ka hoʻomaʻemaʻeʻole a iʻole ka slag.

Kōkua kōkua i keʻano a me ke kaomi

• Nāʻano:

• • Oxycongen (OAHO): Hoʻohana maʻamau no ka hoʻololi houʻana i ka kila kila, ka hoʻolahaʻana i ka oxidation a me ka hoʻonuiʻana i ka huliʻana.
  • Nitrogen (₂): Ua hoʻohanaʻia no kaʻokiʻana i nā mea hana e pale ai i ka oxidation, ka hanaʻana i nā kihi maʻemaʻe me kaʻole o ka hāʻuleʻole.
  • Ka hau: I kekahi manawa i hoʻohanaʻia ma keʻano he kumu kūʻai maikaʻiʻole akā hiki ke loaʻa i ka oxidation.

• Ka paipai: Maʻamau maʻamau mai 0.5 i 20 ka pahu e hilinaʻi ana i keʻano o keʻano a me nā mānoanoa.
• Hopena: Kōkuaʻo Gardit i ke kīleʻa i nā mea kīwaha i waho o ke kerf, ka hoʻoikaikaʻana i ka maikaʻi, pau, a me ka helu wela.

Kūlana Kūlana

• ʻO wehewehe: ʻO ke kūlana pili o ke kūlanaʻo Laser Boam e pili ana i kaʻaoʻao.
• Hopena: ʻO ke kūlana kūpono kūpono e hoʻoponoponoʻia no ka ikaika o ka ikehu maikaʻi loa ma ka wahiʻoki. Hiki ke hoʻonohonohoʻia:

• • Ma ka papa hana,
  • Iki ma luna (defored),
  • Iki ma lalo o ka papa.

• Hopena: ʻAʻole kūpono i ke kākoʻoʻana i nā mea hanaʻilihune, ka nānāʻana, a iʻole ka hoʻohaʻahaʻa nuiʻana.

Pulse Lodeency lāuaʻo Uē nei (No nā lasers pussed)

• Pupululu: Ka helu o Laser Puses i kekona (HZ).
• Pulse Duration: ʻO ka lōʻihi o kēlā me kēia puser laser (microseconds a iʻole nanseconds).
• Hopena: E hoʻohuli i ka ikehu i hāʻawiʻia i kēlā me kēia pulse. Hiki i nā mea kiʻekiʻe me nā pulu pōkole ke hōʻemi i ka hoʻokomo wela, pōmaikaʻi no nāʻokiʻoki i nā kilokilo a iʻole nāʻokiʻoki.

Kū i kahi mamao

• ʻO wehewehe: Ka mamao ma waena o ka laser eʻoki ana i ke poʻo poʻo poʻo poʻo.
• Hopena: Hiki i ka hoʻopauʻana ke hōʻino i ka nozzle a iʻole ke kumu i kūkuluʻia; hoʻemi nui loa i kaʻoihanaʻo GAS GAS GAMED aʻokiʻoki i ka maikaʻi.
• Kaonaʻeha: 0.5 i 2 MM no ka hoʻopiʻiʻana i ke kila kila.

Karf laulā

• ʻO wehewehe: Ka laulā o ka mea i laweʻia e ka paser bear.
• Hopena: Pili i ka dimensional pololei a me ka hoʻohanaʻana i nā mea hoʻohana.
• NūPAKAI KAHOLOHE: Laser Lot, Mana, aʻokiʻoki i ka wikiwiki.

6. Loaʻa i nā kiʻiʻoniʻoniʻo StAinless Steel

Ua lilo iʻokiʻokiʻo Laser i kekahi o nā hana i makemakeʻia no ka hanaʻana i nā mea kiʻi kiʻi kiʻiʻole ma muli o nā hana hana maʻamau.

ʻO nāʻokiʻoki a me nāʻokiʻoki kiʻekiʻe

• ʻO ka laulā milmal: Ua hoʻopiʻiʻo Laser i kahi kīwī i kahi kīʻole loa (ʻoki ākea), ʻoi aku ka liʻiliʻi ma mua o 0.2 mm, nā hopena i nā mea liʻiliʻi ma nā wahi liʻiliʻi a me nā mea e ulu ai.
• Nā kihi maʻemaʻe: Ka wela wela (HAZ) He liʻiliʻi loa, ʻO ka hōʻemiʻana i ke kauaʻana a me ka hūnā.
  ʻO nā kihi ka mea maʻamau a me ka manuahiʻole mai nā mea kanu, e hoʻopau pinepine i ka pono no ka pauʻana o ka lua.
• Nā geomet paʻakikī: Hiki ke kāohiʻiaʻo Laser Boams me nā'ōnaehana CNC, e hiki ai i keʻokiʻana i nāʻano likeʻole, Nā kiko'ī maikaʻi, a me nā kihi paʻakikī e paʻakikī i ka hoʻokōʻana me nā kaʻina hana.

Wikiwiki a me ka makemake

• ʻO ka hoʻoili wikiwiki: Hiki i kaʻokiʻoki ke hana i nā wikiwiki kiʻekiʻe, ʻO ka nui ma luna o kaʻili i nā'āpana kīwaha ākea ākea (a hiki i ~ 15 mm), ʻO ka hōʻemi nuiʻana i nā manawa hana.
• ʻO kahi kūpono: Hoʻohui me CNC a me nā'ōnaehana robotic eʻae no ka hoʻomau, ʻO ka hanaʻole, ʻO ka hoʻomaikaʻiʻana a me ka hoʻemiʻana i nā kumukūʻai hana.
• Hoʻemiʻia ka manawa hoʻonohonoho: ʻO keʻano o keʻano e piliʻole ana i keʻano he meaʻole e hoʻohana ai a iʻole nā ​​loli hoʻonohonoho, aeʻae ana i ka hoʻololiʻana i ka rapid ma waena o nā hanaʻokiʻoki'ē aʻe.

Kūlohelohe a me ka maʻalahi

• Laulā ākea ākea: Hiki i nā'ōnaehanaʻokiʻoki ke hopu i nā'āpana ceelless a hiki i nā mea kilokilo nui loa i ka nui o nā cournat i nā'āpana he nui a kōkua i nā'āpana kūpono.
• Nā koho nui: E hoʻohana i nāʻano likeʻole (nitrogen, oxygen, Kōlea) aeʻae i ka hanaʻana o nā kaʻinaʻokiʻoki e hoʻopili ai no ka wikiwiki, kūmole maikaʻi, a me ka mana o ka ono.
• ʻO nā kūpono kūpono: Ma waho aʻe o nā kila kila, Hiki i nā poʻe Lasers ke hōʻoki i nāʻano likeʻole o nā metala a me nā men-metala me nā hoʻoponopono liʻiliʻi, Hāʻawi i nā kikowaena no nā laina hana i huiʻia.

Kumukūʻai-kūpono

• Hoʻemi ʻia nā mea ʻino: Hoʻopiliʻiaʻo Truprow Kerf a me ke kiʻekiʻe kiʻekiʻe e hōʻemi i nā helu scrap.
• Nā kumukūʻai haʻahaʻa haʻahaʻa: Hoʻemi i ka pono i ka pono no ka mālama lima a me ka hoʻopiliʻana.
• ʻAʻahu mea hana liʻiliʻi: Mai kaʻokiʻana i kaʻokiʻana me kahi beam laser, ʻAʻohe mea e pili ana i keʻano kino a iʻole ka lole, ʻO nā uku hoʻolimalima.
• Ka hoʻoikaika: Ua emi iki nā Lasers First fibers i kahi mana i hoʻohālikelikeʻia i ke kīwī maʻamau, Ke hāʻawi nei i nā hana hana hana holoʻokoʻa.

Nā pono a me nā pono palekana

• Ke kaʻina hanaʻole: Minorizes Mechanization Systes i nā mea a me ka hōʻemiʻana i nā mea hana hana hana e pili ana i nā mea hana hoʻoikaika aʻokiʻoki paha.
• ʻO ke kaʻina hoʻomaʻemaʻe: E hoʻokaʻawale i ka lepo a me ka wahī i hoʻohālikelikeʻia i nā plasma a iʻole keʻokiʻana.
• Hoʻemiʻia ka hoʻohanaʻana i nā mea kūʻai aku: ʻAʻole like me nāʻanoʻokiʻoki, ʻAʻole pono keʻokiʻokiʻoki i nā'āpana a iʻole nā ​​discs, ho'ēmi i ka pauʻole.

Hoʻoikaika i ka hoʻolālāʻana a me nā manawa kūpono

• Hoʻopiʻi wikiwiki: ʻO ka hiki ke hoʻopau wikiwiki a me ka hoʻopiʻiʻana i nāʻano paʻakikī paʻakikī e hoʻonohonoho i nā mea hoʻolālā hoʻolālā a me nā hoʻolālā huahana.
• Nā pilikino: ʻO ka batch liʻiliʻi liʻiliʻi a iʻole nā ​​kauoha maʻamau a iʻole ke kumukūʻai a me ke kumukūʻai ma muli o nā loli haʻahaʻa.
• Micro a me nā hiʻohiʻona hiʻohiʻona maikaʻi: Hiki i kaʻokiʻokiʻo Laser ke hana i nāʻoki maikaʻi loa i kūpono no nā noi kiʻekiʻe ma nā electronics, Nā Pūnaewele Pūnaewele, a me nā'āpana kilati hoʻopunipuni.

7. Nā palena a me nā pilikia o ka ceel cheinless cider cuter

ʻOiai hāʻawi ka ʻoki ʻoki laser i nā pono he nui no ka hana ʻana i ke kila kila, hōʻike pū ia i kekahi mau palena a me nā pilikia e pono e mālama pono ʻia e hōʻoia i nā hopena maikaʻi loa.

Nā palena palena

• Hoemi i ka pono ma na mea manoanoa: ʻOi aku ka maikaʻi o ka ʻoki ʻoki ʻana i ka laser no nā ʻili kila kuhili ʻole ka mānoanoa a me ka mānoanoa, maʻamau a hiki i 15-20 mm.
  ʻO ka ʻoki ʻana i nā ʻāpana mānoanoa e pono ai ka mana laser kiʻekiʻe a me ka māmā māmā, hiki ke hoʻonui i nā kumukūʻai a me nā manawa hana.
• ʻO nā wahi wela wela (HAZ) Ka ulu ʻana: Ke piʻi aʻe ka mānoanoa, piʻi ka hoʻokomo wela e hoʻoheheʻe ai ma o ka mea, e hoʻonui i ka HAZ.
  Hiki i kēia ke alakaʻi i ka distortion thermal, hoʻololi metallurgical, a me ka maikaʻi lihi hoʻohaʻahaʻa.

ʻO ka noʻonoʻoʻana i ka noʻonoʻo a me nā mea waiwai

• ʻO ka noʻonoʻo kiʻekiʻe: Hiki i ke kila kila kila ke hoʻohālikelike i ka kukuna laser, alakaʻi i nā hemahema, ʻoki kūpaʻa ʻole, a iʻole hōʻino paha i nā opser caser.
  Ua hōʻemiʻo Fiber Lasers i kēiaʻoi aku ka maikaʻi ma mua o nā mea kūʻai aku ma mua o nā conarrs akā e koi pono i nā mea hana paʻa.
• ʻAno hoʻohālikelike: Nāʻano likeʻole i ka steel cheinless, paulapua, a iʻole e pili ana i nā mea hoʻohana i ka hoʻopiliʻana o ka laser e hoʻopili ana aʻokiʻoki i ka maikaʻi, koi ana i nā hoʻoponopono hoʻoponopono.

Nā Kūlana Kūʻai a me ka hanaʻana

• Dross ma nā kihiʻokiʻoki: Hiki ke koho i ka koho balota a iʻole hikiʻole ke kōkua i keʻano o ke kino e hiki ke hōʻeha i nā mea molten (drss), pono e hoʻomaʻemaʻe ana i ka hoʻomaʻemaʻeʻana a iʻole ka wiliʻana.
• Stunstions a me ka paʻakikī: I nā wikiwiki eʻoki ai a iʻole nā ​​mea i loaʻaʻole nā ​​lako, ʻO nā storhations a iʻole nāʻano o nā papa hana e ulu ai, ka hopenaʻana aesthetics a iʻole nā ​​mea hana kūpono.

Kōkua kōkua kōkua a me nā uku

• Ke hilinaʻi nei: ʻO ke koho o keʻano kōkua (nitrogen, oxygen, ORREAR) nā hopena nui loa eʻoki i ka maikaʻi, ka māmā holo, a me ka oxidation:

• • Oxycongen: Hoʻolaha i ka wikiwiki wikiwiki me ka oxidation akā hiki ke kumu, nā kihi oxidized.
  • Nitrogen: E hoʻomaʻemaʻe, nā ʻaoʻao oxide-free akā ʻoi aku ka pipiʻi a hiki ke hoʻemi i ka wikiwiki o ka ʻoki.
  • Kōlea: ʻO kahi koho kumukūʻai akā ʻaʻole kūlike i ka maikaʻi.

• Nā uku hana: ʻO nā kinoea maʻemaʻe kiʻekiʻe, ʻoi aku ka nitrogen, kōkua i ka hoʻonui ʻana i nā lilo hana.

Mea pono a me ka mālama

• ʻO ka loaʻa kālā kālā kiʻekiʻe: Nā mīkini ʻoki laser kiʻekiʻe, ʻoi aku ka mana kiʻekiʻe fiber lasers, makemake i ka hoʻokomo kālā nui.
• Optics Sensitivity: Hoʻopili ka laser optics i ka haumia a me ka pōʻino mai nā kaola i ʻike ʻia a i ʻole ka lepo, pono i ka mālama mau a me ka hoʻoponopono ʻana.
• Nā hana akamai: Pono ka ʻoki ʻoki laser maikaʻi i nā mea hoʻomaʻamaʻa a me nā ʻenekinia e hoʻokele i nā ʻāpana, hoʻoponopono pilikia, a hana i ka mālama pale.

Nā hopena maikaʻi a me kaʻoluʻolu

• ʻO nā mea wela wela: Hiki i ka wela laser paʻa ke hoʻoulu i nā koʻikoʻi wela e hoʻoulu ai i ka warping, ʻoi aku ka nui o nā ʻāpana kila ʻili ʻili lahilahi a ʻoki ʻia paha.
• Nā Hoʻololi Microstructural: Ka hōʻike lōʻihi e wela ai e wela i ka microstructure cheinstructure cheinstructure ma kahi kokoke i kaʻaoʻaoʻokiʻoki, pili ana i ka paleʻana o ka corrosionion a me nā mea waiwai.

Nā palena i kaʻokiʻana i nāʻano 3D

• ʻO kaʻokiʻoki 2D: ʻO ka hapa nui o nā'ōnaehanaʻokiʻokiʻo Laser.
  ʻO nā loli 3D a iʻole nā'āpana likeʻole a iʻole nā'āpanaʻokoʻa e pono ai e like me nā hana maʻamau e like me ka laser ulding a iʻole 5-axis laser machining.
• Palena piha piha: ʻO ka lōʻihi o ka lōʻihi a me ka mana o ka laser a me ka mana o ka mana eʻoki ana i ka hohonu a me ke kihi, palena palena no kekahi mau noi.

8. Nā noi o ka ceel stice cuter cuter

Ua liloʻo Laser i keʻokiʻana i nā mea hana kūponoʻole i lilo iʻenehana ma waena o nāʻoihana daine ma muli o kona kūpono, ka māmā holo, a me ka versitility.

Kona hiki ke hana i nā hoʻolālā intrigate me nā kihi kiʻekiʻe e kūpono i nā noi he nui a me nā noi noi.

Ka Hoʻolālā Wīwī

• Nā hana hoʻohālikelike: Hoʻohana nui ʻia ka ʻoki laser e hana i nā ʻāpana kikoʻī no nā mīkini kaʻa, Nā'ōnaehana exhaust, a me nā ʻāpana chassis mai nā lau a me nā pā.
• Prototyping and Customization: Hāʻawi ka ʻenehana i ka prototyping wikiwiki a me nā ʻāpana maʻamau me nā geometries paʻakikī, ke kōkua ʻana i nā ʻenekini kaʻa e hoʻāʻo i nā hoʻolālā me ka wikiwiki a me ka maikaʻi.
• Nā mea hoʻonaninani: Hiki i ka ʻoki ʻoki laser ke hana i nā ʻoki paʻakikī, nā hōʻailona, a me nā grills me nā ʻaoʻao maʻemaʻe a me nā hiʻohiʻona kikoʻī.

Aerospace a me Handiation

• Nā Kūlana Kūlana: Nā ʻāpana kila kila no nā papa mokulele, Nā mīkini kākau, a ʻo nā mea pae ʻāina e koi pinepine i ka ikaika kiʻekiʻe a me ke kūpaʻa corrosion, loaʻa ma o ka ʻoki ʻana i ka laser precision.
• HE KAHAI HAim ANA: Hiki i ka ʻoki ʻoki laser ke hana i ka māmā, Hiki i nā ʻano paʻakikī ke kōkua i nā mea hana aerospace e hoʻopaʻa pono i ka hoʻonohonoho pono ʻana me ka hoʻemi ʻana i ke kaumaha.
• Nā mea paʻa paʻa: Pono nā ʻāpana Aerospace i ka hoʻomanawanui a me ka hoʻopau ʻoluʻolu, hiki i ka cuter keʻoki mau i ka hāʻawiʻana.

Hana olakino

• Nā mea kani: ʻO ke kīwahaʻo Steelless Steel Cuter Cotting ke koʻikoʻi i ka meaʻoi loa, stile, a me nā mea hana pono kūpono e like me nā scalpels, Nā ikaika, a me nāʻakaʻaka.
• Nā mea kanu a me nā prosthetics: Hiki i kaʻokiʻoki keʻokiʻana i ka hanaʻana o ka hanaʻana, ʻO nā mea helu biocomopatles a me nā mea hoʻopiʻi prosthetic me nā kiko'ī.
• Nā Hoʻohana lapaʻau: Hoʻohanaʻiaʻo Laser Code e hana i nā hale kūʻai a me nā'āpana no nā hana diagnostic a me nā polokalamu lapaʻau, kahi a kahi pololei a me ka hoʻomaʻemaʻe he paramount.

ʻOihana Pūnaewele a me ke kūkuluʻana

• Nā pane pane: Uaʻaeʻo Laser i nā mea hoʻokūkū e hana i nā papa hana e hana i ka paʻakikī, ʻO nā'ōlapaʻo Artistics, Nā Kālema, a me nā kahua e hoʻohui pū ai i nā Aesthetics me ka Durability.
• Nā mea hoʻolālā: ʻO kaʻokiʻana i nā'āpana o nā mea kila kila kūponoʻole no ke kākoʻo kākoʻo, nā brackets, a me nā mea paʻa a hoʻomaikaʻi i kūkulu i ka maikaʻi a me ka palekana.
• Nā Kūlana Kūlana a me nā Fitters: Nā mea hana i hanaʻia e nā mea kila i hanaʻia e like me nā mea e like ai, ʻO nā Balustrades, a pōmaikaʻi nā hōʻailona mai ka maʻalahi o ka ʻoki ʻana i ka laser.

Nā meaʻai a me nā mea inu

• Lako Hoomaemae: ʻO ke kūpale ʻino o ke kila kila e kūpono ia no nā kaiapuni maʻemaʻe. Hoʻohana ʻia ka ʻoki laser no ka hana ʻana i nā pahu, pipes, a me nā lako hana i kūpono i nā kūlana hoʻomaʻemaʻe koʻikoʻi.
• Mīkini Packaging: Hoʻomaikaʻi nā ʻāpana kila kila kila i ka hilinaʻi a me ka maikaʻi o ka ʻeke meaʻai a me nā mīkini ʻōmole.
• Nā mea hoʻonani a me nā mea hana: Hoʻohana ʻia nā mea kila kila kila i ʻoki ʻia i ka laser ma nā lako kīhini a me nā lako lawelawe meaʻai kālepa.

Nā uila a me nāʻoihana uila

• ʻO nā pā a me nā pahu: Hoʻopuka ka ʻoki ʻoki laser i nā hale kila kuhili ʻole no nā mea uila, hāʻawi i ka pale a me ka pale wela.
• Microfabrication: Liʻiliʻi, nā mea kiko'ī e like me nā mea hoʻohui, Hoʻokaʻaʻike, a me nā ʻāpana pale e pōmaikaʻi mai ka pololei a me ka hana hou ʻana o ka ʻoki laser.
• ʻO nā Sint a me nā'ōnaehana hoʻoluʻu: ʻO nā'āpana ceeller culener-cuckless caelless e kōkua i ke kōkua i ka wela wela i nā'ōmole uila.

Artke And Hadi

• Sculpture a me nā hoʻonohonoho hoʻonohonoho: Nā mea hoʻohui i nā mea hana laser laser eʻokiʻoki ana i nā hoʻolālā kila kila a me nā hiʻohiʻona e paʻakikī a paʻakikī paha e hoʻokō ai me nāʻano hana maʻamau.
• Mea Kūʻai Kūʻai a me nā Pono: Hiki i nāʻokiʻokiʻo Laser i nā helu kiko'ī a me ka hoʻokaʻawaleʻana i nā'āpana steel i nā'āpana likeʻole me nā kihi a me nāʻano paʻakikī.
• ʻO ka hōʻailona a me ka hōʻailona: Hoʻohanaʻo nāʻoihana i nā hōʻailona cheel ceel i nā hōʻailona a me nā hōʻailona no ka durability a me kahi mea lapaʻau.

9. ʻO ka mālama maikaʻi a me nā kūlana

E hōʻoia ana i ke kūlana kiʻekiʻe loa ma keʻano cheinless killess cuding e hoʻopili i ka mana o ka mana o ka dimensional, kūmole maikaʻi, a me nā kūpono kūpono.

Adtherence i nā kūlana honua a me ka hoʻohanaʻana o nāʻano hoʻokolohua holomua e hoʻomaʻamaʻaʻia no nā hopena kūpono a me nā hopena maʻamau.

Dimensional pololei

• ʻO nā'āpana:
  Ua loaʻa iā Laser keʻokiʻana i ke kila maikaʻiʻole e loaʻa i nā mea i hoʻopaʻaʻia e pili ana i ka mānoanoa. No nā'āpana'āpana (1-3 mm), ʻO nā mea hana likeʻole o nā mea i hanaʻiaʻo ± 0.1 mm.
  No nā papa hehi 10 i 20 mm, ʻO nā mea i hoʻopaʻaʻia i ± 0.3 mm, e like me ISO 2768-M (Palapala Kūʻai Kūʻai Kūʻai).
  ʻO kēia mau manawa e hōʻoia ai i nā'āpana e hoʻokō i nā kiko'ī e hoʻolālā i nā kiko'ī no ka hālāwai pololei a me ka hana.
• Nā papa hana maikaʻi:
  Wahi a I iso 9013, Ua heluʻia ka maikaʻi o kaʻaoʻao e ka paʻakikī (Ra):

• • Papa hana 1: Ra < 2.5 }m, He kūpono no nā noi kiʻekiʻe-kiʻekiʻe e like me nā mea lapaʻau a me nā mea aerospace.
  • Papa hana 2: Ra < 5 }m, Hoʻohana pinepineʻia ma nā noi o nāʻenehana ma kahi o ka hoʻopauʻana o kaʻaoʻao.

ʻO ka hōʻike hoʻokaumahaʻole (Ndt)

• Nānā nānā:
  Ke hoʻohana nei i ka hoʻonuiʻana mai ka heluʻana mai 10x a 50x, Ke nānā nei nā mea hana i nā kihiʻokiʻoki no nā burrs, Nā waihona kālā, oxiyan, a me nā hewa'ē aʻe.
  Hōʻike kēia hana i ka pili o ka mategrity e hālāwai me nā koi aesthetic a me nā pono hana ma mua o ka hana houʻana.
• ʻO ka ho'āʻoʻana:
  No nā mea kila kila kila e like me 316l i 10 ke palika anu, ke nānā aku me ka nānāʻana me 5 Ua hanaʻiaʻo Mhz i nā hana Subsurface i loko o ka wela i ka wela (HAZ).
  Hiki i kēiaʻano ke hoʻomaopopo i nā flaws e like me ka liʻiliʻi 0.2 mm, ka hoʻolakoʻana i kahi hana kūpono kūpono i nā noi palekana-palekana.
• ʻO ka ho'āʻoʻana:
  ʻO ka paleʻana o ka corrosion e pono ai no nā mea kila kila, nui loa ma nā wahi harsh.

• • Astm B117 SPRY SPY SPY SPYS Hōʻike i nā'āpana Laser iʻokiʻia me Nitrogen kōkua i ke kīpē i hōʻikeʻia ma keʻano he kūʻiʻo, me ka nui o 500 mau hola me kaʻole o ka hōʻino nui i loko 304 kila kohu ʻole.
  • He ʻokoʻa, ʻO nāʻokiʻoki i kōkuaʻia exygen 300 hola ma mua o nā hōʻailona o nā hōʻailona. Hōʻike kēia i ka mea nui o ke kohoʻana i ke kohoʻana i keʻano o ke kīwī no ka loaʻaʻana a me ke ola.

10. Hoʻohālikelike me nāʻanoʻokiʻoki'ē aʻe

Ke kohoʻana i kahi hanaʻokiʻoki no ka kila kila, He mea nui ia e loiloi i nāʻano hana likeʻole e pili ana i ka pololei, ka māmā holo, Kālā, o ka kūlana, a me ka kūpono no nā noi kiko'ī.

Ma lalo he hoʻohālikelike piha o ka laser eʻoki ana i nāʻenehana likeʻole: ʻO kaʻokiʻana o Plasma, kaʻokiʻana i ka wai, aʻokiʻoki.

11. Hopena

ʻO keʻano ceelless ceelle cell cuting e kū ana ma ke kikowaena o ʻO kaʻenehana hana pololei a me ka hana houʻana i ka hana hou.

Me ka hiki ke hāʻawi wikiwiki, hoomae, a me nā hopena kūpono kūpono loa, Ua lilo ia i mea paʻa i nāʻoihana lehulehu.

E hele ana kaʻenehana, ka hana o Nā'ōnaehana Laser Smart Laser a me nā hoʻomaʻamaʻa hoʻomaʻamaʻa e hoʻomau i ka panaʻana i nā palena o ka mea i hiki i keʻano o ke kala.

FaqS

He aha ka mānoanoa o ke kila kila e hiki keʻokiʻia me ka hoʻohanaʻana i kahi laser?

Aia ia i ka mana laser:

• A i 6 mm: 1-2 KW CHBER PASRS E mālama i nā'āpanaʻili me nā kiʻekiʻe kiʻekiʻe.
• 6-12 mm: 3-6 nā mea i hoʻohana pinepineʻia.
• 12-25 mm: Koi i ka 6-10 kw + fiber lasers me ke kōkua kūpono a me nā optics.
  Nānā: ʻO ka maikaʻi a me ka wikiwiki e emi ai ka hoʻohaʻahaʻa i ka nui o ka mānoanoa.

Keʻokiʻana i ka laser eʻoki ana i ka oxidation ma luna o ka kila kila?

Wale nō oxygen hoʻohanaʻia he kōkua kōkua. I mea e pale ai i ka oxidation a me ka weheʻana:

• Hoʻohana nitrogen E like me kahi hau hau.
• Hana kēia, nā kihi maʻemaʻe, Kūpono no nā noi asshetic a iʻole nā ​​noi pili (E.g., olakino, nā lako meaʻai meaʻai).

He aha nā mea hana maʻamau no nā'āpana cielle cuter?

Thalerancesʻokoʻa e ka mānoanoa:

• ± 0.1 mm No 1-3 mm mau'āpana'ōpala.
• ± 0.2-0.3 mm No nā papa 10-20 MM.
  Nā kūlana like ISO 2768-M and I iso 9013 E wehewehe pono i nā papa maʻamau a me nā papa hana maikaʻi.