6061 T6 ALUMIIN - Properaties, Hoʻohana & KA MANAWA

1. Hōʻikeʻike

6061 T6 Aluminum Alylos i kauʻia ma waena o ka VERS VERINTAITE a me ka nui o nā helu aluminum i hoʻohanaʻia ma nā hana hou.

Kona kino o ʻO ka maikaʻi o ka ikaika o ka momona, ʻO ke kū'ēʻana o ka corrossion maikaʻi, and kumukūʻai haʻahaʻa hana ia i kahi koho ubiquitous no nā mea i hoʻopiliʻia mai nā mea hoʻoponopono a yerospace i nā mea pāʻani bicycle.

Eia nō naʻeʻelua mau hiʻohiʻonaʻelua 6061 Uaʻoi aku ka maikaʻi o T6 ma mua o nā mea'ē aʻe: ia now-ʻO ka hiki ke wela- a iʻole mahana i loko o nāʻano kokoke i kokoke i nāʻano kokoke i nā wahi kiʻekiʻe,

a me kona ʻO CNC ke kaʻina CNC-ʻO ka maʻalahi me ka mea hiki ke mactines e paʻa i nā mea i hoʻopaʻaʻia a me nā papa hana maikaʻi.

2. He aha la 6061 T6 aluminim alloy

ʻO ka huiʻana o keʻano 6061 Alloy

6061 aluminum he lālā o ka papa 6xxx, hōʻikeʻia e ka magnesium a me Silikona e like me kāna mau kumu nui.

He luna 6061 T6 sodelItion (kaupaona pakeneka) penei:

T6 Magper: Hoʻomoe i ka hopena wela wela a me ka huhū

Ka hoʻololiʻana o ka t6 6061 alloy i loko o kona kūlana ikaika ikaika e ka hoʻohuiʻana i nā'āpanaʻelua: hopena wela wela and ʻO ka wā kahiko. ʻO kēlā me kēia papa hana pāʻani i kahi hana koʻikoʻi:

Hopena wela wela (Sht)

• Kumu: Wehe i ka magnesium a me ka silini i loko o kahi lole, supersatuturated sted.
• Kaʻina hana:

• • Keka ao: 515-535 ° C, paʻa lōʻihi-maʻamau 1-2 hola 1, Ke hilinaʻi nei i ka mānoanoa.
  • Quetch: Koke koke ma hope o ka hikiʻana i ka mahana, ʻO ka'āpana ma lalo o ka wai wai wikiwiki (ka wela o ka wai ma lalo nei 60 ° C).
    ʻO kēia mau "freezes" Alloying nā mea i kahi, Ke pale nei i ka hoʻokumuʻana i ka papa kuhikuhi.

ʻO ka wā kahiko

• Kumu: Hoʻopili maikaʻiʻia nā pale maikaʻi i nā'āpana e hoʻonāukiuki i ka neʻeʻana.
• Kaʻina hana:

• • Keka ao: 160-180 ° C.
  • Wa: 8-12 hola, hoʻoponoponoʻia e hōʻea i ka paʻakikī ikaikaʻole me kaʻole o ka wā kahiko.

3. ʻO nā mea pilikino a me nā pono o 6061 T6 ALUMINUM

6061 Hōʻikeʻo T6 Alminim i kahi hui kūpono o ka ikaika, kumaikalua, a me keʻano hana e hana ai i kūpono no ke kalaʻana a me ka cnc machining.

ʻO ka "T6" i loaʻa i ke kūlana ma o ka hopena o ka hana wela ma ka hanaʻana i ka wā hoʻokūkū (ʻO nā mea maikaʻi maikaʻiʻo MG₂si i loko o kahi papa inoa a Alminum).

Ma ka hopena, 6061 Hāʻawiʻo T6:

• Ikaika kiʻekiʻe (ka ikaika ikaika-i-paona), e hana ana i nā mea kaumaha ke kaumaha.
• ʻO ke kū'ēʻana o ka corrossion maikaʻi, Mahalo i kāna mg-si alloying a me nāʻano cute cu.
• ʻO ka hoʻonuiʻana i ka hōʻikeʻana a me ka laweʻana, ka hoʻomaʻamaʻa paʻaʻana i ka hanaʻana i ka macika a me ke kalaʻana i nā hana.
• Kaulike machinein, Eʻae ana i nā wikiwiki eʻoki ana i nā wikiwiki me ka mea hana kaʻa kaʻa a me nā mea maikaʻi loa.

Aia ma lalo nei he papa helu helu o keʻano o ke kino a me nā mea hana likeʻole 6061 T6 ma ka papa maʻamau a iʻole ka papaʻaina (12-20 mm mānoanoa):

4. No ka nohoʻana o 6061-T6 aluminim

6061-T6 ALUMINUM ʻo ia kekahi o nā mea i hoʻohana nuiʻia i hoʻohanaʻia, kaulana no kona ikaika maikai, Ke kū'ē neiʻo Corrosionion, a me ka wellingbility.

Akā naʻe,, I ka hiki ana mai Kākau, 6061-ʻO T6 ka maʻamau maʻamau ʻaʻole i manaʻoʻia he kūpono ma kāna kūlana t6rper Ma muli o kona ikaika kiʻekiʻe a me ka haʻahaʻa haʻahaʻa haʻahaʻa ma ka mahana o ka lumi.

He aha ke kalaʻana?

ʻO ke kalaʻana he kaʻina hana hana e like me keʻano o ka metala e hoʻohana ai i nā pūʻali koa pili, pinepine ma lalo o ke kaomi kiʻekiʻe a kiʻekiʻe kiʻekiʻe.

Pono ia i ka mea e pono ai ka ductile e pono ai e hōʻole me kaʻole o ka paleʻana a iʻole.

E mālama i nā puka makani Windows

6061 ʻO T6 ka maikaʻi loa i ka "ʻO ka wela-wela" wela no 350-500 ° C. Maā ~ 480 ° C, Hiki i ka'āina ke hiki ke hoʻopau i ka hiki i nā makahiki paʻakikī.

Malalo ~ 350 ° C, lilo i mea paʻakikī a paʻakikī paha. He hana maʻamau:

• Preheat i 400-450 ° C: E hōʻoia i ka wela o keʻano o keʻano no keʻano e hana me kaʻole oxidation.
• Mālama i ka mahana make: Ua mālama pinepineʻia nā make ma ~ 200 ° C e hōʻemi i ka nui o ka helu hoʻomehana a pale i nā pale anuanu.

E LOA ANA

1. E hoʻopau ana i ka holoiʻana:

• • Kūpono no nā billets nui a iʻole nāʻano maʻalahi (E.g., Nā BaRS, ʻO nā Roos).
  • Ua hana hou i ka hammering / hoʻomaikaʻi i ka nui o ka palaoa maikaʻi a hoʻomaikaʻi i ka isotropy.

2. Pani-make (Manaʻo-make) Kākau:

• • Pono no nāʻano kokoke kokoke e like Nā lima lima, Nā Blanks Flange, Oole huʻi lima.
  • Koi pono i nā mea kūpono e hoʻokō ai i nā mea hana i loko o ± 1 mm, ka ho'ēmiʻana i nāʻae ma ke komoʻana o CNC.

3. Ke kala mai nei ka ho'ōlaʻana:

• • Nā poʻo poʻo ma nā'āpana (E.g., Nā Mole Kike) a iʻole e hoʻonui ai i ka māhele helu helu ma nā wahi ākea.
  • Pono no ka hoʻouluʻana i nā hiʻohiʻona e like me nā posses a iʻole splines paha ma mua o ka machining hope.

ʻO nā mea hoʻomehana Microstructural i ka wā e kala ai

• Hoʻoiliʻiaʻo DynacicStalishing: I ke kalaʻana i nā mahana, nā hua'ōlelo hou hou, Hoʻopau i nā pale e like me ka hukiʻana a iʻole nā ​​mea i hoʻopiliʻia.
  E hana ana kēia ʻO ka nui o ka palaoa (Astm 9-10), e hoʻomaikaʻi i nā meaʻelua static a me ka ikaika kaumaha.
• Ka ho'ēmiʻana: ʻO nā kala kala he nui e hele ai i nā mea maʻamau crystallogic, Hoʻopili i keʻano o keʻano o ka hanaʻana i ka intropic.
• Kāleʻa Intermetallic: Al₇cu₂fe a alfessi phases e wāwahi ana i lalo o nā pūʻali koʻikoʻi, Ke hōʻemi nei i nā pūnaewele i hoʻomaka i nā pūnaewele.

Nā kala kala maʻamau a me nā momi

• Kāle Uhiʻi: E hele ana inā he kala i ka mahana ma lalo o ~ 350 ° C a iʻole inā he kiʻekiʻe loa nā kumukūʻai strain.

• • Miomi: Preheat i ka mahana o keʻano; Ke ho'ōla nei i ka wikiwiki.

• Laps a me nā pā: Nā hemahema i ka wā e kahe ana i nā kahe metala i luna iā ia iho.

• • Miomi: Hana kūpono kūpono me ka uku kūpono a me nā kalaʻana.

• Ulu ulu nui: Hiki ke hōʻole i ka paʻakikī inā he kala a me nā hana houʻana.

• • Miomi: Nā Kūlana Kūlana-Kūlana; E hoʻohana i nā hui waena waena inā pono.

ʻO ka mālamaʻana i ka mālama wela

Koke koke, 6061Ua komoʻo Microstrugle, 'āpana'āpana'āina.

E hoʻihoʻi i nā waiwai Mechanical a me ke kalaʻana i nā kaumaha, ʻO nā māhele e hoʻopiha pihaʻia T6 wela wela:

1. Hopena wela wela (515-525 ° C, 1-2 HRS):
   - nā'āpana i hoʻopaʻaʻia i loko o ka umu 520 ± 5 ° C.
   - E paʻa i ka lōʻihi no nā mg₂si a me nā cu-cu-i loaʻa i nā mea e hoʻopili ai.
   - Quench i ka wai ma lalo nei 60 ° C e laka i ka lolo i nā atom solite atoms i kahi hopena supersaturaturated.
2. ʻO ka wā kahiko (160-180 ° C, 8-12 HRS):
   - Hoʻololi i nā'āpana i kahi huluhulu weliweli ma 170 ± 5 ° C.
   - Holoi a hiki i ka paʻakikī paʻakikī (β "nā hewa) Nā Palapala Kūlana, Ke paleʻole nei i ka haʻaleleʻana.
   -ʻO ka lewa maikaʻi i ka ambient.

Ma hope o ka mālamaʻana o T6, Hapai 6061 hōʻike i ka ikaika like a me nā mea paʻakikī paʻakikī e like me ka stock stock-Us o 300 Mpa and ka hopena o ka 260 Mpa-But me kahi mea kūʻai aku, Hoʻopiliʻia ka hoʻonohonohoʻana i ka lua.

ʻO kēia mau mea hoʻonani Mickestructure Kaʻa Kaʻamae (5-10 % Ka hoʻomaikaʻiʻana) and hopena paʻakikī ua hoʻohālikelikeʻia a iʻole e hoʻoleiʻia 6061 T6.

5. CNC ke kaʻina o 6061 T6 ALUMINUM

6061 Hoʻopiliʻo T6 Aluminim i kahi microstructure maikaʻi-maikaʻi, nā'āpana he nui i loaʻa i nā'āpana mg₂si i nā mea i hoʻopiliʻia-me nā mea haʻahaʻa haʻahaʻa haʻahaʻa-paʻakikī.

Ma ka hopena, e hoʻomaʻemaʻeʻia nā mīkini a me nā wānana, Ke hana nei ia i kahi koho GO-e koho no nā'āpana e koi ana i nā mea i koiʻia a me nā mea maikaʻi loa.

Ka helu matchinbility

6061 E hoʻopaʻaʻo T6 i kahi helu machnicability o ~ 70% pili i a 1212 (100%) ʻO keʻano maʻamau. Ua unuhi kēia i:

• ʻO CHIP maikaʻi: Ke Mau, ʻO nā pahu kīwahaʻole i ka wā e hāʻule ai nā'āpanaʻokiʻoki i loko o nā wahi i'ōleloʻia ai.
• E hoʻohana i nā mea hana maʻalahi: ʻO nā mea hana i makemakeʻia; Hiki i ka HSS ke lawa no ka haʻahaʻa haʻahaʻa a iʻole prototype holo.

No ke aha he 6061-T6 maikaʻi loa no CNC MACIVING

Ikaika ikaika a me ka palupalu

I ka T6 huhū, 6061 E hui pū me ka ikaika o keʻano haʻahaʻa (~ 300 mPA) me ka lawa lawa (12-17 % ewangantion).

ʻO kēlā kaulike keʻano o ka hanaʻana i nā alloy i nā koho koho ma lalo o nāʻokiʻoki akāʻaʻole i hana nui.

Ma ka hopena, Keʻoki nei nā mea hana me kaʻole o ke kamaʻilioʻana a iʻole keʻano o keʻano o ka paleʻana i kaʻaoʻaoʻokiʻoki.

Laulu, ʻO nā mictorcture mictorcor

ʻO ka hana wela o T6 (E mālamaʻo Gree i ka wela + ʻEhā) hana i ka hoʻolahaʻana o kahi homogeneous o nā mg₂si i nā manawa kūpono i loko o nā mea i hoʻopiliʻia (Astm 8-9).

ʻO kēia mau Nanoscale e hoʻohui i ka ikaika me kaʻole o ka hoʻolālāʻana i nā intermentaycs.

NOEHUI, ʻO nā kiʻina alloy, curled snarf ma mua o ka lōʻihi, ʻO ke kaula kaulahao-maʻalahi i ka weheʻana i ka chip evacuation a hōʻemi i kaʻaoʻao i kūkuluʻia i luna o nā mea hana.

Ke alakaʻiʻana i ka thermal

Me ka armal ke a puni 167 W / m · c · k at 20 ° C, 6061 Hoʻokomoʻiaʻo T6 wikiwiki i ka wela i ka wela i loko o ka chip a me ka coolant ma mua o ka hoʻokuʻuʻana i ka wela i ka papa hana.

Mālama kēia i nā mea kūʻai aku ma mua a kūkuluʻia i kūkuluʻia. I ka hoʻomaʻamaʻa, Hiki i nā Machistiss ke holo i nā wikiwiki o nā wikiwiki o 250-450 m / min (820-1 480 ft / min) me nā mea i hoʻopiliʻia, mālama i nā ola maʻamau.

Hana liʻiliʻi

ʻAʻole e like me kekahi mau alluinum a Alminim e paʻakikī koke i lalo o ka strain, 6061 T6 E hōʻike wale i ka paʻakikī ma mua.

ʻOiai ma nā uku hānai kiʻekiʻe (0.05-0.15 mm / niho niho i ka milling or 0.15-0.30 mm / rev in clieng), ʻAʻole e kūkulu kaʻaoʻao i kahiʻili paʻakikī "."

Hiki i kēlā kūpaʻa ke hiki i nā mea hana wānana, nā hoʻomanawanui paʻa (± 0.01-0.02 MM), a me nā papa maikaʻi loa (Ra 0.4-0.8 μm) Ke loliʻole nei nā mea hana maʻamau.

Laulā ākea o nā mea hana kūpono

• • Nā mea i hoʻopiliʻia (Gula, Hānū): Hoʻokō i ka uila wikiwiki (a i 600 m / my) Me ka liʻiliʻi liʻiliʻi i kūkuluʻia.
  • Corbatd hss drills: E hāʻawi i ka maikaʻi maikaʻi (0.05-0.15 mm / rev) i loko o nā'āpana liʻiliʻi a iʻole prototype holo.
  • ʻO nā kapa komo-like (Dlc): Eʻae i nā hele wāwae Ultra-maikaʻi, e hāʻawi ana i nā papa aniani (Ra < 0.2 }m) No nā koi a me nā koi.

Maikaʻi loa

6061 ʻO ka hana a T6 (≈ 23.6 × 10-° C) ua hoʻomaopopoʻia.

Ke hui pūʻia me nā manawa kūpono a me nā manawa kūpono, Ua hoʻomaka ka uluʻana o ka Thermal.

Hāʻawi kēia i nā mīkini CNC i nā mea e like me ke kaʻina hana a iʻole ka ukuʻana a iʻole ka ukuʻana i nā hiʻohiʻona i loko ± 0.005-0.010 mm, ʻOiai ma luna o nā hola he nui.

ʻO ka paleʻana o ka corrosion a me ka hoʻopauʻana

Hāʻawi ka MG-Si Atrix i ka paleʻana i ka pale. I nā'āpana CNC i nā'āpana, Hoʻemi kēia i ka pono no ka hoʻonuiʻana i ka post-prosining post.

Ma hope o ka Machining, adizizing a iʻole nā ​​lole lole e pili pono ana, ka hāʻawiʻana i nā pale o ka hana a me ka hoʻopiʻiʻana a me kahi hoʻopiʻi hoʻopiʻi no Aerospace, aitompetitive, a me nā noi noi.

Ka waiwai waiwai a me ka recycling

Ua hoʻohālikelikeʻia i nā alloys kūikawā, 6061 ʻO T6 ka waiwai nui.

Ua hanaʻia nā pahu scrap i ka wā o nā kaʻina hana cnc, hoʻomālamalama, a me nā mea i hoʻihoʻiʻia i loko o nā kahawai recycling me ka hoʻopaʻi kālā liʻiliʻi.

Mālama kēia i nā kumukūʻai ma kahi o ka manika ma lalo a kākoʻo i nā hana hana maʻamau.

6. Hoʻohālikelike hoʻohālikelike: Forced vs. Kiʻiʻia vs. Kiola 6061 T6

• Hapai 6061: Hāʻawi ʻO nā waiwai maikaʻi loa aʻoi aku ka hana o isotropic, e hoʻoikaika ana i ka wā Kaʻa Kaʻamae and hopena paʻakikī he koʻikoʻi.
• Pio 6061: Kumukūʻai-kūpono no Nā hiʻohiʻona maʻamau (tuku, channels, Nā BaRS). Kūpono i kūpono Cr mi mliring o nā hana a me nāʻano 3D, akā ua hilinaʻiʻia nā waiwai.
• Kiola 6061: Hiki i ka mālamaʻana i nā geometx i loko o nā geomet i loko a me ka māmā "lattic" Potiwale and Nā Hālāwai grain, ka palena o ka ikaika a me ke ola momona.

7. Ka pros a me ke kumu o 6061 T6 aluminim alloy

Pros o 6061-t6 aluminim alloy

ʻO ka maikaʻi o ka ikaika o ka momona

Me ka ikaika o ka tensile o ka laula 290-310 mpa a me kahi density o 2.70 g / cm³,

Hāʻawiʻo Alumini 6061-T6 i ka ikaika kiʻekiʻe-kūpono no nā noi i kahi e hāʻawi ai i ka nui o nā mea kaumaha.

ʻO ke kū'ēʻana o ka corrossion maikaʻi

ʻO ka MG-Si Matrix a me nā copper copper interure intherent intherent e pale ai i ka oxidation a me nā wahi e like ai.

I ka hoʻomaʻamaʻa, 6061-T6 alumini mau mea i hoʻopaʻaʻia me ka hōʻike ma waho, Mālamalamaʻo Marine, a me nā mea hana maʻamau maʻamau me ka degradation minimal.

ʻO ka machiniblibility

Helu a puni 70 % Ma keʻano machinibility (pili i kahi kilaʻoki manuahi), 6061-Hana ka T6, Nā pahu wāwahi a haʻalele i kaʻaoʻao i kūkuluʻia.

E hoʻokō pinepine nā hale kūʻai i nā wikiwiki eʻoki ana i ka 250-45050 m / min me ka mea hana kaʻa kaʻa a hiki ke paʻa i nā mea hana paʻa (± 0.01 mm) a me ka nui o ka lele e like me ka mea e like me ra 0.4 }m.

No ka formability a me ka formability

I loko o ka "hōʻoluʻolu" hōʻoluʻolu (350-500 ° C), 6061-E maʻalahi maʻalahiʻo T6, e hāʻawi ana i kahi maikaʻi, kūlike i keʻano (Astm 9-10).

NOEHUI, ʻO ka make-make-make a iʻole ke kalaʻana i ka hanaʻana i nā hana ma kahi kokoke i ke ola maikaʻi loa (pinepine 10-15 % hoʻomaikaʻiʻana ma luna o ka mea i hanaʻia / hoʻolei 6061).

ʻO ka pane wela wela

Ka t6 huhū (Hanaʻia ka hopena ma 515-535 ° C, ka wai wai, makahiki ma 160-180 ° C) E hoʻolōʻihi i ka hanaʻana i nā mea maikaʻi maikaʻi mg₂si (Β "a β 'i).

Ua hāʻawi kēia i ka waiwai maʻamau i ka waiwai-yoing ~ 250 Mpa, Us ~ 300 Mpa, HANOLO ~ 90 HB-ma waena o nā'āpana'āpanaʻokoʻa.

Maikaʻi loa

I ka hoʻomākaukauʻana (maʻemaʻe, Mamua, a me nā mea wela-wond-weld e pono ai e pono ai), 6061-T6 WELLS WELLS ma Tig, Iaʻu, a iʻole nā ​​hana kumu lāʻau.

ʻOiai ke koi aku neiʻo Weld Zones i ka hoʻomaikaʻiʻana i ka ikaika piha, ʻAʻole e hoʻopiliʻia ka Alloy i nā hana maʻamau maʻamau.

Kumukūʻai-kūpono a me ka hoʻihoʻi

Loaʻa koke mai ka hapa nui o nā minit ma Bar, papaʻi, a me nā profiled, 6061-T6 ke kumukūʻai kūpono i hoʻohālikelikeʻia i nā alloys kūikawā aerospace.

ʻO kāna mau pōpoki a me nā scrap 100 % recyclable, hoʻemi i nā kumukūʻai kālā ma nā hana CNC kiʻekiʻe.

Maikaʻi maikaʻi thermal

Ma kahi kokoke 167 W / m · c · k, 6061-T6 hoʻokuʻu koke i ka wela i ka wā machining, Ke ola nei i ke ola hana, a mālama pono i ka mahana o ke kalaʻana i ke kalaʻana, ka ho'ēmiʻana i nā mea gradi e hiki ke hōʻeha i nā pale.

Cons of 6061-T6 aluminim alloy

ʻO ka ikaika haʻahaʻa e hoʻohālikelikeʻia i nā mana kiʻekiʻe kiʻekiʻe

ʻOiai ikaika no kahi alumini, 6061-T6 (Us ~ 300 Mpa) ʻaʻole hiki ke hoʻohālikelike i nā ikaika o ka'ōpū o nā allowys e like me 7075-t6 (~ 570 Mpa) a iʻole nā ​​mea kanu kūikawā.

I nā noi kiko'ī koʻikoʻi-ʻoi aku ka nui o ka'āpana liʻiliʻi e pono ai nā'āpana liʻiliʻi.

ʻO ka hana maʻamau

Ma luna o kahi kokoke 150 ° C, 6061-Hoʻomakaʻo T6 e nalowale i kona paʻakikī ikaika a me ka ikaika ma muli o ka nui o ka makahiki o mg₂si.

No ka lawelawe mau ma luna 200 ° C, Hiki i ka ikaika a Alloy ke hāʻule i ka hola 30-50 %, Ke hanaʻole nei no ka mīkini kiʻekiʻe-kiʻekiʻe a iʻole nā'āpana likeʻole.

Ka ikaika momona

I ka poli, nā'āpana hoʻohālikelike, ka palena momona (~ 95-105 MPA) he haʻahaʻa loa ma mua o nā mea kilokilo a iʻole nā ​​mea i koiʻia a iʻole nā ​​uku alumini (E.g., 7075 Oole 2024).

ʻOiai ke kalaʻana i hiki ke hoʻomaikaʻi i ke ola o ka hōʻehaʻana ma ke olaʻana ma ka nui, 6061-ʻAʻole kūponoʻo T6 no ka cyclic nui loa, ʻO nā noi kiʻekiʻe e pili ana me kaʻole o nā hoʻomaʻamaʻa hou (ʻO ka panaʻana, ʻO ke kaomiʻana o ka wela wela).

WELLT-BAT BATT (HAZ) Huahue

Oiai 6061-T6 mau a me ka wikiwiki, Ua hoʻolōʻihi ka wela o ka wela (ka hāʻuleʻana i ~ 50-60 % o ka paakiki kikowaena) a koi aku i ka hoʻomaʻamaʻa post-weld i ka hana a me ka hoʻomaikaʻi houʻana e kiʻi hou i nā waiwai T6.

ʻO kēia mau hana hou e hoʻohui i ka manawa, Kālā, a me nā mea hoʻohālikelike paha.

Kānalua i ke kaumaha o ke kaumaha (SCC)

I nā wahi e hoʻonāukiuki i nā maʻi (ʻO ke kai kai waiʻole a iʻole nā ​​kai moana), ʻoi aku ma lalo o ke kaumaha o ka tensile, 6061-Hiki i ka T6 keʻike i ka hakakāʻana o ke kaumaha.

Pono nā mea hoʻolālā e wehewehe i nā pale pale pale (Anodichiz, Wehe) a iʻole e koho i nā alloys scc-resistant (E.g., 5052, 5083) No ka hana mau.

ʻO Arisotrip F Strision waiwai

Pio 6061 Hōʻikeʻo Bars i ke kaheʻana o ka palaoa.

I ka manawa i loaʻa ai nā'āpana i nā extrusions, Hiki i nā mea kuhikuhi ke alakaʻi i kahi liʻiliʻi (< 10 %) ʻO nāʻano likeʻole ma ka ikaika a iʻole ka hāʻawiʻana i ka ikaika e pili ana i ka hoʻokele nui. Hoʻemi i ka hoʻemiʻana i ka anisotropy akā hoʻohui i ke kumukūʻai.

Kaupalena i ka paleʻana

Me ka paakiki brinell o ~ 90 Hb ma t6, 6061-T6 mau mea e kau wikiwiki ai ma mua o nā mea hou a iʻole nā ​​mea hoʻokele.

I ka nānāʻana a iʻole nā ​​noi i kauʻia (Kauluhi, Bussings), nā mea mālama kino a iʻole nā ​​lole (paʻakikī paʻakikī, ʻO ka hanaʻana o Nickel) koiʻia e hoʻonui i ke ola lawelawe.

ʻO ka hoʻonuiʻana i ka hoʻonuiʻana

He papa hana o ka hoʻonuiʻana i keʻano 23.6 × 10⁻⁶ / ° C Manaʻo Manaʻo e hoʻolālā pono ana i ka wā e pili ana i nā lako haʻahaʻa haʻahaʻa (Kukui Kekuhi, Nā Kūlana).

Nā mea kanu cnc paʻa (± 0.01 mm) hiki ke hōʻemi inā hana i nā hopena hana-mai kaʻokiʻana a iʻole keʻano o ke kaiāulu.

8. He aha ka 6061-T6 Aluminim i hoʻohanaʻia no?

Aerospace

• ʻO ka Fitters Fitters a me Fuselage
• Nā'āpana o nā Drone Frame
• ʻO ka paeʻana o ka'āina a me nā trunniona

Kaʻa kaʻa & Kaʻahele

• Hoʻopili nā loulou a me nā lima hoʻomalu
• Nā wili uila a me nā brackets
• ʻO nā mea wela i ka wela no nā mea uila

Hāleʻa & Nā lako hāmeʻa

• ʻO nā kīleʻa bicycle frame a me nā crankms
• Scuba ceylinder valled a me nā kūpono
• Nā poʻo kāleka kāleka a me nā poli hale kūʻai

Nā mīkini mīkini

• ʻO nā kino Valve a me Pump Manifolds
• ʻO nā pikoʻo Hydraulic cylinder a me ke koʻokoʻo
• Nā Jigs, Nā Mea Mola, a me nā kumu mīkini

Marine & Of 3Ikeha

• ʻO nā mea kūpono a me ka leleʻana
• Nā HUBSTLEN HUBS a me nā RESTUT
• ʻO nā mea hoʻonani a me nā hoʻomaʻemaʻe

Mea uila & Nā huahana kūʻai

• Nā Kūlana Kūlana Kūlana Polokalamu Polokalamu
• ʻO nā kino kāmela a me nā leke
• Nā mea wela e hoʻomoʻa ai i nā mea e hoʻopili ai

Matapili & Kūhae

• CUTUNEAL BLOCK MOLOLLIS a me FIMES
• Nā Kūlana Kūlana a me nā Railings
• RV a me Trailer e hōʻike ana i nā mīkini

9. Hopena

6061 Hoʻopiliʻo T6 ALIMInim i kahi maʻi AL-MG-SI Aly Chemistry me T6 E hoʻomaʻamaʻa i ka maikaʻi a me ka machining.

ʻO nāʻano hana e like me nā mea e hōʻoluʻolu ai, Kenikiniʻana, a me ka smittital simulation e hoʻomau i ka hoʻonui 6061 Nā Manaʻo T6.

ʻO ka hoʻomaopopoʻana i kēia mau ikaika i hoʻohuiʻia i nā mīkini e hana i nā mea hana e hana ai i nā'āpana i ka ikaika kaulike maikaʻi loa, Ke kaumaha, 'Clelo pololei, a me ke kumukuai.

 

Hoa pili me LangHe e hoʻolilo i ko mākou hopena hope loa Kākau, ʻO ka hana wela, and Cnc iching no 6061 T6 aluminim alloy.

Inā makemake pahaʻoe i kahi papa hana maʻamau a iʻole kahi hana e holo ai i nā'āpana paʻakikī, ʻO kā mākou mau mea hana loea a me nā pono kūpono e hāʻawi i nā pono, māmā māmā, a me nā hopena liʻiliʻi eʻoi aku ka nui o nā manaʻo.

Kāhea iā mākou i kēia lā No kahi kūkākūkā a iʻole ka kūkākūkāʻana.

 

FaqS

He aha ka 6061-t6 aluminim e like me?

ʻAʻohe mea hoʻokahi "hāʻule i ka" steel like me ke kūlike, Akā ma ka honua alumini, 6061-T6 nā paila:

• En ad-6061 t6 (ʻEulopa / iso)
• Aimg1sicu (China / Jis A6061)
• Mai 3.3211 (Kelemānia)

He 6061-t6 aluminim ikaika ma mua o ke kila?

• I nā hua'ōlelo kūpono loa: ʻO nā mea kanu (me nā helu maʻamau maʻamau e like me A36 a iʻole 1018) i nā ikaika kiʻekiʻe kiʻekiʻe loa (400-550 mpa) CALE 6061-T6 (~ 300 Mpa). Pela, e nā helu, ʻO ke kila "ikaika" i kahi hoʻohālikelike pololei.
• Ma kahi kumu ikaika-kino: No ka mea he 6061-T6 ka hana a ka density wale nō 2.70 g / cm³ versus sterel's ~ 7.85 g / cm³, ia ikaika kiko'ī he hoʻokūkū nui loa.
  ʻo kahi laʻana, Hiki i kahi papa 6061-T6 e lawe kokoke i ka ukana nui e like me ka pahu kila e like me ka nui o nā dimensions likeʻole.
• I nā noi me ka loaʻaʻana o ka cyclic a iʻole corrosion: ʻO kahi hana 6061-T6 e hoʻopau i nā mea hoʻokūkū no ka mea,ʻaʻole ia e hoʻoponopono i ka wikiwiki a me ka hōʻikeʻana.