UNS S20910 vs S21800 Stainless Steel – Key Differences

1. Hōʻikeʻike

Kā mākou S20910 (commonly marketed as 'Ākau 50 Oole XM-19) and UNS S21800 (commonly marketed as 'Ākau 60 Oole Alloy 218) are advanced austenitic nā mea kanu lāʻau engineered for demanding service.

Both deliver better performance than conventional 300-series grades, but they are optimized for different priorities:

• S20910 ('Ākau 50) he corrosions-resistant, nitrogen-strengthened austenitic stainless optimized for high corrosion resistance (including sour service), maikaʻi maikaʻi, paʻakikī maikaʻi loa (including cryogenic), a me ka welau maikaʻi.
  It is often specified where resistance to pitting, SCC and low-temperature toughness are required together with reasonable strength.
• S21800 ('Ākau 60) is formulated primarily for wear and galling resistance while retaining corrosion resistance typical of austenitics.
  It contains high silicon and manganese for tribological performance and is selected where sliding contact, aloha, and high wear are the dominant failure modes.

This article compares composition, mechanical and corrosion behaviour, huahuai, and real-world application trade-offs so you can select the right alloy for a specific component or environment.

2. What Is UNS S20910 ('Ākau 50)

Kā mākou S20910, i kaulana 'Ākau 50 Oole XM-19, he high-performance nitrogen-strengthened austenitic stainless steel.

It is engineered to deliver a combination of Ke kū'ē neiʻo Corrosion Corrossion, ikaika ikaika, kumaikalua, a me ka, including at cryogenic temperatures.

These attributes make it well-suited for demanding industrial applications such as chemical processing, ʻO nā wahi kai moana, and sour-service conditions.

Key material designations and specifications Hoʻohui:

• Astm A276 / A479 (as XM-19)
• UNS S20910
• Mai 1.3964

Primary characteristics of UNS S20910 ('Ākau 50):

• Ke kū'ē neiʻo Corrosionion: Enhanced by increased chromium, Mybridelu, a me nā manaʻo nitrogen; highly resistant to pitting and crevice corrosion in chloride environments.
• Ka ikaika ikaika: Stronger than conventional 300-series stainless steels, with excellent yield and tensile properties.
• Ductility and toughness: Maintains performance at both elevated and cryogenic temperatures.
• Fabrication and weldability: Can be machined, hanaʻia, and welded with conventional techniques; solution annealing restores ductility after cold working.
• Nitrogen-strengthened: Nitrogen addition increases yield strength and contributes to pitting resistance without compromising austenitic ductility.
• Application suitability: Listed in Nace Mr0175 for sour service, suitable for marine hardware, nā mea hana kālepa, nā'āpana ikaika, and structural applications requiring corrosion resistance and mechanical performance.

3. What Is UNS S21800 ('Ākau 60)

Kā mākou S21800, i kapaia ia e like me 'Ākau 60 Oole Alloy 218, he high-performance austenitic stainless steel designed primarily for wear and galling resistance, while maintaining good corrosion performance typical of austenitics.

Its specialized composition makes it ideal for applications where sliding contact, Kākau Inhauk, and high surface stress are primary concerns.

Key material designations and specifications include:

• Astm A276 / A479 (for bars, ʻO nā Roos, and other wrought forms)
• UNS S21800

Primary characteristics of UNS S21800 ('Ākau 60):

• Wear and galling resistance: Elevated manganese and silicon content, combined with a nitrogen-strengthened austenitic matrix, provides superior resistance to aloha, Kākau Inhauk, and surface seizure.
• Ke kū'ē neiʻo Corrosionion: While not as corrosion-resistant as Nitronic 50 in highly aggressive chloride environments, Hāʻawi ia ʻO ke kū'ēʻana o ka'ōpū suitable for moderate chemical and marine exposures.
• Ka ikaika ikaika: Exhibits high strength in both annealed and cold-worked conditions, with excellent surface hardness after work hardening.
• Fabrication and welding: Can be welded and fabricated using standard methods, though its higher silicon and manganese content may require adjustments in welding filler selection and machining parameters.
• Application suitability: Hoʻohana maʻamau no Nā lāʻau lāʻau, Nā mea paʻa, Nā'āpana nui, bearing surfaces, and other components subjected to repeated sliding contact or wear-intensive service.

4. Typical Chemical Compositions and Alloying Differences

A critical factor distinguishing UNS S20910 ('Ākau 50) and UNS S21800 ('Ākau 60) is their alloying strategy, which directly influences corrosion resistance, ka ikaika ikaika, wear behavior, and fabrication characteristics.

While both are nitrogen-strengthened austenitic stainless steels, they are optimized for different service priorities.

Representative Chemical Compositions (wt%) and Performance Role

Interpretation: S20910 emphasizes Cr + I + Mo + N (classic austenitic corrosion alloying with nitrogen strengthening and Mo for pitting resistance).

S21800 trades some chromium and nickel for elevated silicon and manganese, which improve hardness, wear and galling resistance.

4. Mechanical Properties and Temperature Behaviour

Kā mākou S20910 ('Ākau 50) and UNS S21800 ('Ākau 60) exhibit distinct mechanical profiles reflecting their alloying strategies.

ʻO nā mea waiwai nui

Temperature Behaviour

• Cryogenic Performance:
  S20910 retains ~90% of impact energy at liquid helium temperatures, making it suitable for LNG storage, cryogenic piping, a me nā noi a Aerospace.
  S21800 retains reasonable toughness but is not optimized for extreme low temperatures.
• ʻO ka hana-wela-mahana:
  Both alloys maintain dimensional stability and strength at moderate elevated temperatures.
  Nitronic 50’s Mo content provides additional resistance to high-temperature corrosion, while Nitronic 60’s high Si content improves oxidation resistance in sliding-contact applications.
• Hana paʻakikī:
  Both alloys are austenitic and work-hardening, meaning mechanical properties, especially hardness and yield strength, can be increased via cold working.
  S21800 benefits most due to high Mn and Si, improving wear and galling performance.

5. Corrosion Resistance and Pitting Resistance (Wood)

ʻO ka heluʻana i keʻano kūlike (Wood) is a useful indicator of resistance to chloride pitting; it’s calculated from Cr, Mo and N content (simplified form: PREN ≈ Cr + 3.3×hu + 16Anih).

• 'Ākau 50 (S20910) — higher Cr, Mo and N yield PREN values in the low-to-mid 30s (typical engineering figure ≈ ~34).
  That places it well above 316L (PREN ≈ 20–25) and makes it suitable for many chloride-bearing environments, including some marine and sour service (it is commonly accepted for NACE MR0175 qualifying in many conditions—verify certificate).
• 'Ākau 60 (S21800) — because Mo is typically absent and Cr is lower, PREN is haʻahaʻa (typical mid-20s or less depending on exact chemistry).
  While S21800 resists general corrosion reasonably well, ʻo ia ʻaʻole chosen primarily for pitting resistance; ', it is used where galling and wear are primary concerns.

6. ʻAʻa, galling and tribological performance

• 'Ākau 60 (S21800) ua hanaʻia galling resistance and sliding wear.
  High silicon and manganese, combined with work-hardening capacity, produce a surface that resists adhesive wear and metal-to-metal seizure.
  Typical uses include valve stems, noho mau noho, Nā mea paʻa, and pump components where repeated sliding contact occurs.
• 'Ākau 50 (S20910) hāʻawi ʻO ke kūpaʻa maikaʻi, but its primary strengths are corrosion resistance and toughness rather than optimized galling resistance.
  It is sometimes used in wear applications where corrosion control is also required, but for extreme galling environments S21800 usually outperforms it.

7. Huahuai, welding and heat-treatment considerations

Wawahua

• Both alloys are welible by standard processes (Tig, Iaʻu, Smaw).
• S20910 (higher Ni/N) is highly weldable and retains corrosion resistance after welding when proper procedures and filler metals are used.
  Low carbon and stabilized practices can minimize sensitization risk.
• S21800 requires attention to heat input and filler selection because its high Si and Mn can influence weld metal composition; preheat/post-weld heat treatment practices depend on component size and code requirements.

Forming and machining

• Both are hana-paʻakikī austenitics; S21800’s higher Si/Mn can make cutting more challenging—tooling and speeds need adjustment.
  S20910 in solution-annealed condition is generally easier to machine/form.

ʻO ka hana wela

• These are austentic alloys—strength is primarily from cold working and alloying; full hardening by quench/tempering is not applicable.
  Solution annealing can restore ductility and corrosion resistance (typical anneal ~1000–1100 °C followed by rapid cooling).

Hydrogen/sour service

• S20910’s chemistry and listing in some sour-service guidance make it suitable for H₂S environments (verify NACE/ISO certifications).
  For sour service weld procedures and hardness limits (HRC thresholds) are normally enforced.

8. Applications of UNS S20910 vs UNS S21800 Austenitic Stainless Steel

The distinct alloying strategies, Nā Pīkuhi Propertinies, and corrosion/wear characteristics of UNS S20910 ('Ākau 50) and UNS S21800 ('Ākau 60) define their suitability across different industrial applications.

Applications of UNS S20910 ('Ākau 50)

UNS S20910 is engineered for Ke kū'ē nei ke kū'ē kiʻekiʻe, paʻakikī maikaʻi loa, a me ka welau maikaʻi, making it ideal for environments where both corrosion and mechanical performance he koʻikoʻi.

Applications of UNS S21800 ('Ākau 60)

UNS S21800 is optimized for galling and wear resistance while maintaining reasonable corrosion performance.

It is ideal for mechanical components subjected to sliding, adhesive contact, or high surface stress.

Application Guidance

• Choose UNS S20910 when the primary concern is corrosion resistance in aggressive or sour environments, especially when toughness, wawahua, and low-temperature performance are required.
• Choose UNS S21800 when aloha, ʻaʻa, and sliding contact dominate failure modes, even if corrosion resistance is less critical.
• In complex assemblies, hybrid designs can leverage both alloys—using S20910 for corrosion-critical parts and S21800 for high-wear mating surfaces.
  Surface engineering such as Nā pāpale, nitriding, or PVD treatments can further extend service life when combined with these alloys.

9. Direct Comparison Table: UNS S20910 vs UNS S21800

10. Hopena

Kā mākou S20910 vsa S21800 are complementary alloys within the Nitronic family.

Pick S20910 where corrosion resistance (especially pitting/crevice and sour service) plus toughness and weldability are paramount.

Pick S21800 where galling and wear dominate and corrosion is a secondary concern.

In many real applications the optimum solution is a combination—design the system so each part sees the alloy best suited to its dominant failure mode, or apply surface engineering to extend service life.

 

FaqS

Can I weld S21800 with standard stainless fillers?

ʻAe, but select fillers and procedures to accommodate S21800’s high Si/Mn chemistry—consult welding procedure specifications and filler supplier guidance.

Which alloy resists sulfide stress cracking (SSC)?

S20910 is commonly accepted for many SSC environments and is used in NACE-subject applications; verify specific NACE/ISO certification and hardness limits.

Is Nitronic 60 (S21800) suitable for seawater?

It has reasonable general corrosion resistance in seawater but lacks the pitting resistance of Nitronic 50 or Mo-bearing grades; if seawater pitting is critical, choose S20910 or a higher PREN alloy.

Can either alloy be heat-treated to increase strength?

These austenitic alloys gain strength mainly by ʻO ka hana anuanu And Allole; conventional quench/temper treatments are not used to significantly increase strength. Solution annealing restores ductility/corrosion resistance.