Ke kūʻai aku neiʻo Canding Breing: Pehea e koho ai?

1. Hōʻikeʻike

Ke kūʻai aku neiʻo Canding Breing Hōʻike i kekahi o nā hoʻoholo koʻikoʻi nui loa i kaʻoihana kūʻai.

ʻO kēia mau mea i hoʻohana nuiʻia e hoʻohana ai i nāʻenehana hana e like me ke kua o ke kua no ka hanaʻana i nā'āpana metala paʻakikī, aitompetitive, olakino, NA KAHIKI, a he nui nāʻoihana'ē aʻe.

Nā'ōlaʻi kewai, Ma keʻano he hana hana kumu, pili i ka nininiʻana i nā mea molten i loko o kahi mū i kahi neʻe e hoʻokō ai i keʻano makemake.

ʻOiai ke kauʻana i nā mea kūʻai akuʻelua (Ke kaʻina hana-Wax) a me ka sand e hoʻolei ana i kēia kaʻa i kēia kumuhana core, ʻokoʻa loa lākou i loko pololei, paulapua, Kālā, Loaʻa ka waiwai, a me ka scalability placection.

Hāʻawi kēiaʻatikala i kahi ka hoʻohālikelikeʻana i ka hoʻopiliʻana i ka hoʻopukapuka kālā a me ke kauʻana o ke one, e nānā ana i kā lākou kaʻina hana, Nā hiʻohiʻona, Loaʻa, PAHUI, a me nā noiʻoihana.

2. He aha ka mea kūʻai aku (Ke kaʻina hana-Wax)?

Kāhaka kūʻai kūʻai, kaulana nō hoʻi e like me ke kaʻina hana-wax, heʻano hana koho ākea i hoʻohanaʻia e hana i nā mea paʻakikī a me nā mea kiʻekiʻe kiʻekiʻe.

E pili ana ia i ka hanaʻana i kahi kumu hoʻohālike o ka wana i makemakeʻia o ka'āpana i makemakeʻia, e uhi ana ia me kahi pulu demictory, a laila e hoʻohalike ana i ka wax ma mua o ka nininiʻana i ka metala molten i loko o ka lua.

ʻO kēia kaʻina hana nui loa no kona hiki ke hoʻokō i nāʻano kokoke kokoke i nāʻano media, ʻO nā mea maikaʻi loa e hoʻopau ai, a me nā mea i hoʻopaʻaʻia nā dimensional.

Nā hana hana

1. Wax kumu hoʻohālike: ʻO kahi wax replica o kaʻaoʻao hope loa i hanaʻia me ka hoʻohanaʻana i kahi molū.
2. ʻO keʻano papa: Hiki ke hoʻohuiʻia nā huapalapala i ka nui ma ke kahua waena e hana i kahi lāʻau wax, ʻO ka hoʻomaikaʻiʻana i ka hana kūpono.
3. ʻO ka haleʻo CEMIMIC: Hoʻopili pinepineʻia ka lāʻau wax i loko o kahi slurry clurry a me nā coated me ka maikaʻi maikaʻi a me ka paleʻana i nā mea resractory maikaʻi.
4. Wax lawe (Hoomoana): Ua hoʻomehanaʻia ka pūpū ma kahi autoclave a iʻole ka umu, melting a e inu i ka wax, Ke waiho nei i kahi lua hollow.
5. E ninini ana i nā meatal: Ua hoʻopihapihaʻia nā'āpana ceramika i hoʻopihaʻia me ka metala molten ma lalo o ka gravity a iʻole nā kūlana.
6. ʻO ka hoʻomaʻemaʻe a me ka māhoe: I hoʻokahi manawa, Ua wāwahiʻia kaʻili o ka ceramic, a uaʻokiʻia nā'āpana wai mai ka lāʻau.
7. Ke hoʻopauʻana: ʻO nā hana e hoʻopili ai i ka hana, kūhā, machining, mālamaʻona, a me ka wela wela inā pono.

Nāʻano o ka hoʻolimalima kālā

Hiki ke hoʻopaʻaʻia ka mea kūʻai aku ma keʻano o ka slurry clurry a me ka binder i hoʻohanaʻia e hana i ka neʻe. ʻO nāʻano nuiʻelua:

• Silca Sowass Insteme Hoʻohanohano:

• • Uers Silica Sol (cilica Silica) e like me ka mea e.
  • Hāʻawiʻia Hoʻopau maikaʻi loa (Ra 1.6-3.2 μm) and kiʻekiʻe dimensional pololei (± 0.005 iniha).
  • Kūpono no nā kila maikaʻi, Nā Kahu Pūnaewele, a me nā papa kiʻekiʻe-kiʻekiʻe i hoʻohanaʻia ma Aerospace, olakino, a me nāʻoihana kaʻa.
  • ʻOi aku ke kumukūʻai kiʻekiʻe ma muli o ka manawaʻoi aku ka lōʻihi o ka hoʻomākaukauʻana a me nā mea hou aku.

• ʻO ka wai inu wai wai wai:

• • Hoʻohana i ka silika sodium (nā wai wai) e like me ka mea e.
  • ʻOi aku ka maikaʻi akā nā hopena i loko o kahi papa hana ma keʻano (RA 4-6 μm) hoʻohālikelikeʻia i Silica Sol.
  • Hoʻohana maʻamau no ka carbon cheel a me nā'āpana haʻahaʻa haʻahaʻa a me nā'āpana haʻahaʻa e pono ai.
  • He kūpono no nā'āpana nui a me nā hana ma kahi e noʻonoʻo ai ka uku.

Nā hiʻohiʻona o ka mālama kālā

• ʻO ka pololei kiʻekiʻe kiʻekiʻe: Nā mea paʻa e like me ± 0.005 iniha (± 0.125 mm), ka ho'ēmiʻana i ka pono no ka manikona mua.
• Ke hoʻopauʻana i ke kiʻekiʻe: Hoʻokō Ra 1.6-3.2 μm (63-125 min) No nā kaʻina hana Silica.
• Hoʻolālā paʻakikī: Mālama i nā geometries intries, nā pāʻili (e like me 1.5-3 mm), a me nā undercuts me kaʻole o ka mea hana paʻakikī.
• Nā Kūlana Kūʻai: Pono kūpono no nā alloys kiʻekiʻe, ka mea i hoʻohanaʻia ma ka aerospace, olakino, a me nā'āpana ikaika.
• Nā laulā nui: Maikaʻi loa no nā'āpana liʻiliʻi liʻiliʻi (mai kekahi mau mea nui a hiki i ~ 50 kg), ʻOiai e hiki ai i nā'ōnaehana kūikawā ke hana i nā'āpana nui.
• Ke Kuhihewa: ʻO ke kiʻekiʻe kiʻekiʻe no ka medium- a holo nui ka nui ma muli o nā hana kūpono a me nā kaʻina hana.

3. He aha ka mea e lele ana?

Sand cread ʻo ia kekahi o nā mea kahiko a me ka hapa nui o nā hana capnique choson, Ke hoʻihoʻi nei i nā kaukani mau makahiki a ua hoʻohana pinepineʻia i ka hana hou.

ʻO ke kaʻina hana e hana ana i ka hanaʻana i kahi cald cavity mai ke oli, e ninini ana i nā mea moltten i loko o ka pā, A laila e uhaʻi i ke kahe o ke or i ke kiʻiʻana i ke kāʻeiʻana i ka wā i hoʻopaʻaʻia ai.

ʻO kāna maʻalahi, scalability, a me ke kumukūʻai-kūpono e hana ai i kahi ala i makemakeʻia no ka hanaʻana i nā'āpana nui, Hopoi, a me nā mea hana haʻahaʻa haʻahaʻa haʻahaʻa.

Uaʻikeʻiaʻo Sand Canding no kona hiki ke lawelawe maikaʻiʻole i kekahi metala a iʻole alloy, mai nā mea ferous e like me ka hao hao a me ke kila i nā metala non-ferous e like me alumini, bronze, a me ka mea nui.

ʻO keʻano he mea nui loa keʻano o ka mīkini kaumaha, aitompetitive, a me nā mea hanaʻoihana hana no ka hiki ke hana nā'āpana nui a paʻakikī hoʻi ma kahi kumukūʻai haʻahaʻa ua hoʻohālikelikeʻia i nā hana canding canding canding.

Nā hana hana

1. Kumukaha Kahuna: He kumu hoʻohālike, hana maʻamau i ka lāʻau, palaki, a iʻole he mea hao paha, ua hoʻopiliʻia e hoʻopili i keʻano o ka hopena hope loa. Nā Waihona Manaʻo no nāʻae a me nāʻaelike ma ke komoʻana.
2. Mākaukau Mold: One i hui pū me kahi mea paʻa (e like me ka pālolo, Kākoʻo, a iʻoleʻaila) ua paʻiʻia a puni ke kumu hoʻohālike e hana ai i ka neʻe. Hoʻopiliʻia kahi'āpana'āpana e hōʻoia i ka wehe maʻalahi i keʻano o ke kumu hoʻohālike.
3. Hui ai (Inā makemakeʻia): Hoʻokomoʻia nā cores i loko o ke one i loko o ka neʻe e hana i nā cavities kūloko i loko o ka hale kūʻai.
4. E ninini ana i nā meatal: Ua nininiʻiaʻo Molten i ke kīwī i loko o ka pā mold ma o kahi'ōnaehana gating i hoʻolālāʻia e kāohi i ka kahe.
5. Mālama a me ka hoʻoponopono: ʻO nā mea hoʻonaninani a me nā mea paʻa a paʻa i loko o ka mū, ka laweʻana i keʻano o ka lua.
6. Hoʻopau: Ua wāwahiʻia ke kahe o ke one e kiʻi hou i ka mea kūʻai aku, a hiki pinepine ke kau i ke one no ka wā e hiki mai ana.
7. ʻO ka hoʻomaʻemaʻe a me ka hoʻopauʻana: Hoʻomaʻemaʻeʻia ka hale kūʻai, laweʻia nā'īpuka a me nā ala, a hoʻopau i nā kaʻina hana e like me ke kīwī a iʻole maching i hanaʻia.

Nāʻano o nā one

Hiki i ke one ke lawe aku i nāʻano likeʻole o nā mea hana a me nā binders, komo:

• ʻO nā'ōlapa o ke aniani:

• • I hanaʻia mai keʻano kūlohelohe, pāanikino, a me ka wai.
  • ʻO ka hana maʻamau a me ka hoʻokele waiwai.
  • Kūpono no ka hana kiʻekiʻe a me nā mea kūʻai nui-kumu.

• ʻO nā pale o ka pā (A-bake):

• • Ua hui pūʻia me ka resin resnthetic a he mea paʻakikī.
  • Hāʻawi i kahi maikaʻi maikaʻi (Ra ~ 6-12 μm) a me keʻano kūlike i hoʻohālikelikeʻia i keʻano'ōmaʻomaʻo.
  • Hoʻohana pinepineʻia no nā'āpana paʻakikī aʻoi aku paha.

• Nā mū maloʻo maloʻo:

• • ʻO nā mold mold i hoʻopaʻaʻia a iʻole i hoʻopaʻaʻia ma mua o ka nininiʻana i nā mea hao.
  • Hāʻawi i ka ikaika maikaʻi a me ka maikaʻi, kūpono no nā hale kūʻai nui.

Nā hiʻohiʻona o ke kauʻana o ka one

• Laulā o nā'āpana'āpana: Hiki ke hana i nā hale kūʻai mai nā mea kilokilo i kekahi mau kiʻi, Ke kūpono nei ia no nā poloka mīkini, NA Nā peni aku, a me nā'āpana waiwai nui.
• Nā Kūlana Kūʻai: Aneane hiki ke kauʻia nā mea loaʻa āpau, e komo pū ana, hūnā i nā irons, aluminum, Nā koho koho balota, a me ka mea nui.
• ʻO ka pololei o ka dimensional: Nāʻano maʻamau ± 0.020 a ±-0,2 mau iniha no kēlā me kēia Inch (± 0.5 i ± 1 mm per 25 mm), e koi ana i ka machina hou no nā noi kūpono.
• Hoʻopau ʻili: ʻO Rougher ma mua o ka hoʻopukapukaʻana, me ka paʻakikī o kaʻili ma waena o Ra 6-25 μm, E pili ana i keʻano o keʻano.
• Mea hana kūpono: ʻO nā kumukūʻai haʻahaʻa haʻahaʻa i hoʻohālikelikeʻia i ka hoʻopukapukaʻana, nui no nā'āpana nui a iʻole nā haʻahaʻa haʻahaʻa.
• Hoʻolālā Hoʻolālā: Hiki ke hana maʻalahi i ka maʻalahi o nāʻano paʻakikī paʻakikī, ʻOiai e hoʻokomo i nā kiko'ī a iʻole nā paia paha (<5 mm) he paʻakikī.
• Recyclabiality: Hiki ke hoʻihoʻi houʻo Sand i nā manawa he nui me ka hana kūpono, Ke hana nei i ke kaʻina hana e hoʻohālikelikeʻia i nā hana e pili ana i nā hana kūʻai.

4. Hoʻohālikelike hoʻohālikelike: Ke kūʻai aku neiʻo Canding Breing

I ka wā e loiloi ana i ka hoʻopukapukaʻana i ke kūʻaiʻana i nā mea kūʻai aku, Pono e noʻonoʻo nā mea hana i kahiʻano o kaʻenehana, Apono, a me nā mea hana.

Hoʻopau ka lani a me ka dimensional pololei

• Hoʻolei kālā:

• • Hoʻolako i kahi hopena maikaʻi loa o ka Ra 1.6-3.2 μm (63-125 min) me nā hana silica sols e hana a puni RA 4-6 μm No ke aniani wai.
  • E hoʻokō i nā mea hana dimensional, maki ± 0.005 i / i loko (± 0.125 mm per 25 mm) No nā'āpana liʻiliʻi.
  • Pono pinepine nā'āpana i ka machimal match, ka hoʻemiʻana i ka manawa hana post-form e a i 50-70% ua hoʻohālikelikeʻia i nā'āpana o ke one.

• Sand cread:

• • ʻO ka hoʻopauʻana o ka lani, maki Ra 6-25 μm (250-1000 min) Ke hilinaʻi nei i keʻano o ke one (Green Sten vs. resin-boned).
  • ʻO nā meaʻehā i hoʻonuiʻia, nui ± 0.020-0.040 i / i loko (± 0.5-1 mm per 25 mm).
  • Koi aku i ka pauʻana a iʻole machining no nā noi kiʻekiʻe.

Hopena: No nā mea hana pololei e like me Aerospace Turbine Blades a iʻole nā mea lapaʻau, ʻO ka uku kūʻaiʻana o ka mea kūʻai aku a me keʻano o ka hoʻokele waiwai,

ʻOiai he lawa ka nui o ke kauʻana no ka nui o nā mea hana koʻikoʻi e like me nā poloka mīkini, kahi iʻoi aku ka paʻakikī.

Māhele nui a me ke kaumaha

• Hoʻolei kālā:

• • Kūpono kūpono no Nā'āpana liʻiliʻi-i-medium kaupaonaʻana mai kekahi mau grams i kahi kokoke 50 kg (110 lbs).
  • Kaupalenaʻia e ka ikaika a me ka nui o nā'ōpū.

• Sand cread:

• • Hiki ke hana mau'āpana nui loa, ka heleʻana mai kahi mau kila i kahi mau tons, e like me nā puʻu o ka makani a iʻole nā mea mīkini ikaika.
  • ʻO ka nui o ka nui o ka nui o nā mea kūʻai nui o ke kīʻana o Sand Canding.

Nā Kūlana Kūʻai

• Hoʻolei kālā:

• • Nā mea maikaʻi ma ke kāʻeiʻana nā Alloys maikaʻi loa, komo nā mea kanu nckel, Titanium, a me ka alloys alloys, he paʻakikī i ka mīkini.
  • Nā kumuwaiwai maʻamau: nā mea kanu lāʻau, Nā Kahu Pūnaewele, aluminum, bronze, a me nā alloys copper.
  • Makemakeʻia no Aerospace, ikaika, a me nā noi olakino ma muli o ka hiki ke mālama i nā hana kiʻekiʻe kiʻekiʻe.

• Sand cread:

• • ʻO Veyratile nui loa ferrous a me nā metala non-ferous, komo hūnā i nā irons (hinahina, ʻO Dāhihi, keʻokeʻo), nā pāpale, Apana Apana Aluminum, Nā pāpale keleawe, a me ka mea nui.
  • Maikaʻi no nā'āpana liʻiliʻi, E.g., nā mīkini hana kaʻa kaʻa kaʻa (hae hao, aluminum), Nā Hale Hōʻikeʻike (bronze, Kukui Kekuhi), a me nā kino lāʻau.

Hoʻolālā paʻakikī

• Hoʻolei kālā:

• • Hiki ke hoʻololi hou nā geomet paʻakikī, nā pāʻili (1.5-3 mm), Nā leka maikaʻi, a me nā kiko'ī kiko'ī me ke kumu kūʻaiʻole.
  • Kūpono no nā'āpana me nā lua kūloko, nā undercuts, a iʻole nā hiʻohiʻona curved.

• Sand cread:

• • Hoʻohana maʻamau no ʻO nā mea maʻalahi a iʻole nā'āpana likeʻole.
  • Pono nā hiʻohiʻona o loko o nā hiʻohiʻona kūloko, e hoʻohui i ke kumukūʻai a me ka pilikia o ka hoʻololiʻana o ka dimensional.

Hana nui a me ka manawa alakaʻi

• Hoʻolei kālā:

• • Maikai no medium i ke kiʻekiʻe-nui Hoʻohana, Ma kahi e kū ai nā kumukūʻai hana e ka pololei a hōʻemi i ka machining.
  • Ka manawa o waena o ka hoʻomaka a i ka wā pau: ʻO ka maʻamau 6-10 mau pule No nā mea hana a me ka hana prototype.

• Sand cread:

• • Nā uku haʻahaʻa haʻahaʻa e kūpono i nā prototypes, haʻahaʻa-volume, a me nā hale nui.
  • Ka manawa o waena o ka hoʻomaka a i ka wā pau: Pinepine 2-4 mau pule No nā molū mua ma muli o keʻano maʻalahi.

Nā noʻonoʻo noʻonoʻo

• Hoʻolei kālā:

• • Mea kūʻai: High (nā mea hao no nā hiʻohiʻona wax).
  • Uku uku: ʻOi aku ka kiʻekiʻe ma muli o ka hoʻomākaukauʻana i ka moho.
  • Hāʻawiʻia ke kumukūʻai i ka wā ʻO ka hana pololei a me ka minimal ma ka hana hōʻemi i ka uku o ka hana.

• Sand cread:

• • Mea kūʻai: Hoʻohaʻahaʻa (lāʻau lāʻau a iʻole nā hiʻohiʻona resin).
  • Uku uku: Haʻahaʻa no nā'āpana nui a me nā helu liʻiliʻi.
  • Maikaʻi loa no nā'āpana hana koʻikoʻi ma kahi o ka pauʻana o ka papa a me nā mea kanu he lua.

Nā manaʻo mechanics a me ka hana

• Hoʻolei kālā:

• • Hua denuser, nā micer-grained microstructure, e alakaʻi ana hoʻomaikaʻi i ka paleʻana i kaʻeha a me ka ikaika o ka mīkini.
  • Hana pinepineʻia i ka hana hoʻonuiʻia.

• Sand cread:

• • ʻO nā kumukūʻai maloʻo ke lohi nei ma muli o nā molds, Kau i ʻO nā papa hana Borinner a me nā haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa.
  • Lawa no ka hapanui o nā noi a me nā mea hana kaumaha.

5. Nā noi o ka hoʻolimalima kālāʻana ma ke kapaʻana o Sand

Hoʻolālā kūʻai kūʻai

ʻO ka mea kūʻai akuʻo ka mea kūʻai akuʻo Hall, Ke hana nei i nā mea i loaʻa i nā'āpana nā hoʻomanawanui paʻa, Hoʻopau maikaʻi loa, a me nā mea kūʻai holomua he koʻikoʻi:

• Aerospace:

• • ʻO nā'āpana hana kiʻekiʻe e like me nā pale turbine, nā keʻena hui, Nā Niazzle Fuel, a me nā wahi kūpono i hanaʻia mai nā mea kanu nckel, Titanium, a me ka alloys alloys.
  • E noi i nā māhele i ke kāohiʻana i ka mana o ka dimensional a me nā mea waiwai maikaʻi loa e like me ka mahana nui a me nā kaumaha.

• Nā Pūnaewele Pūnaewele:

• • Nā mea hana ʻokiʻoki, ʻO nā mea hana ortthopedic, Nā Manaʻo Tental, a me nā'āpana micro-mau'āpana.
  • Hiki i ke kaʻina hana i nā makana biocompatible a me nā geomex paʻakikī e pono ai no nā hoʻolālā pilikino.

• Kaʻa kaʻa:

• • Nā'āpana pololei me nā mea leʻaleʻa turboarger, nā kino valve, a me nā gears, nui loa i nā kaʻa kiʻekiʻe a me nā kaʻa nani.
  • Hoʻohana pinepine nā poʻe i nā kila kila, Apana Apana Aluminum, a me nā metala kūikawā.

• Kaʻohana a me ka mana:

• • Nā'āpana wai, Nā'āpana Valve, a me nā'āpana pump e koi ai i ka ikaika kiʻekiʻe a me ke kū'ēʻana.
  • Hana pinepineʻia mai nā mea kanu a me nā mea kanu lāʻau.

• Mea hana hana:

• • ʻO nā wai kiʻekiʻe, nozzles, a me nā hana kūpono i hoʻohanaʻia ma nā mea hana a me nā mea paʻa.

Or ka? O n?

ʻO ka mālamaʻana o Sand i keʻano a me ka hiki i nā'āpana nui e hana i nā koho nui e koho ai i ke koho nui i nāʻoihana nui a me nā noi ka nui a me ka palaualelo he paramika:

• Ka Hoʻolālā Wīwī:

• • Nā poloka mīkini, Nā poʻo cylinder, Nā hihia i hoʻounaʻia, Nā'āpana pale, a me nā'āpana hoʻopiʻi i hana muaʻia mai ka mokuahi.
  • ʻO nā mea hana kiʻekiʻe kiʻekiʻe me nā koi kūpono.

• Nā mīkini kaumaha a me nā hana hana:

• • Nā hoolohe nui, Nā Frame, Nā Hāʻewa, a me nā mea hoʻonohonoho i hanaʻia mai ka hao hao, Kukui Kekuhi, Aʻo nā kikila alloy.
  • Ua nui nā'āpana i nā haneli he mau haneli o nā kilograms i kekahi mau tons.

• Pump a me nāʻoihana valve:

• • Nā Hale Hōʻikeʻike, nā kino valve, hanakai, a me nā pipa kūpono e hoʻoleiʻia mai nā bronze, Kukui Kekuhi, a hao hao.
  • Koi pono i ka durability a me ka corrosion e kū ana ma mua o nā mea paʻa.

• Ka ikehu ikehu:

• • ʻO ka makaniʻo Turbine Hubs, nā hoomoʻa, a me nā kākoʻo hoʻonohonoho i hanaʻia e ka one e ka nuiʻana ma muli o ka nui a me nā koi ikaika.

• Marine a me nā moku moku:

• • Nā Kūlana Kūʻai, rudders, a me nā mea nui o nā mīkini nui i hanaʻia mai ka bronze a me nā kila kila.

• Nā noiʻenehana maʻamau:

• • Nā lako hana, ʻO mīkini mīkini hana, a me nā'āpana rail e hilinaʻi i ka one e lele ana no ka rotin, nā'āpana nui.

6. Loaʻa a me nā palena o ka hoʻolimalima kālāʻana ma ke kapaʻana o Sand

Hoʻolei kālā

Loaʻa:

• ʻO ka pololei kiʻekiʻe kiʻekiʻe: Nā mea maʻamau e like me ka paʻa e like me ± 0.005 iniha (± 0.125 mm), ka hōʻemi nuiʻana i ka mīkini a me ka hoʻopauʻana i nā uku.
• Ke hoʻopauʻana i ke kiʻekiʻe: Hoʻokō i nā papa papa (Ra 1.6-3.2 μm) kūpono no ka hana kokoke kokoke.
• Nā geomet paʻakikī: Hiki ke hana i nā hoʻolālā hoʻolālā, nā pāʻili (a lalo i 1.5 mm), a me nā cavities kūloko me keʻole o nā kumu.
• Nā Kūlana Kūʻai: Maikaʻi no nā alloys holomua, komo me nā mea hoʻonani nikel, Titanium, 'lelo'Slelo, a me nā mea kanu lāʻau.
• Kūlike a me ka hana hou: Kūpono no ka medium- i ka hana kiʻekiʻe-Volume me ka mea hana kūpono.

PAHUI:

• ʻO nā uku hana kiʻekiʻe kiʻekiʻe: ʻO ka mea i hoʻopiliʻiaʻo Wax i ka hana a me ka hana hana cerramic e pili ana i ka loaʻaʻana o ka waiwai nui.
• Nā Luna Pūnaewele: Maʻamau maʻamau i nā'āpana ma lalo o ~ 50 kg (110 lbs) Ma muli o nā palena ikaika.
• ʻO nā manawa alakaʻi: ʻO ka haleʻo Shell a me Burnoout e hoʻonui i nā manawa hana i hoʻohālikelikeʻia i nā manawa e hoʻohālikelike ai.
• ʻO ka hoʻohanaʻana i ka ikehu o ka ikehu: Ma muli o ke kaʻina hana o Curramic a me nā kaʻina burnot.

Sand cread

Loaʻa:

• Uku haʻahaʻa haʻahaʻa: ʻO nā hiʻohiʻona maikaʻi loa i ka maʻalahi a maʻalahi hoʻi e hoʻololi, Kūpono no ka prototyping a me nā holo liʻiliʻi.
• Ka nui nui: Hiki ke hana i nā'āpana e kaupaona ana i kekahi mau tons, He kūpono no nā noi hana koʻikoʻi.
• Laulā Mea Pono: He kūpono no kahi ākea ākea o nā alloys non-ferrous, komo pū me nā meaʻalani a me nā kila.
• Recyclable nā mea: Hiki ke kiʻi houʻiaʻo Sandu, ka hoʻemiʻana i ka pauʻole a me ke kumukūʻai.
• Wikiwiki wikiwiki: ʻO ka pōkole ke alakaʻi i nā manawa no ka hoʻomākaukauʻana a me ke kauʻana, ka hoʻomaʻamaʻaʻana i ka uku wikiwiki.

PAHUI:

• ʻO ka pololei o lalo: ʻO nā mea hana maʻamau he ± 0.020 a ±-0,2, e pono ai i ka machining hou aku.
• Hoʻopauʻo Rougher: ʻO ka paʻakikī o ka helehelena maʻamau mai RA 6-25 μM, pinepine e koi pinepine ana i keʻano a iʻole ka polish.
• Ka mana palena palena hema: Paʻakikī e hoʻokō i nā'āpanaʻili (<5 mm) Ma muli o nā palena o ke kauʻana i nā palena.
• ʻOi aku ka nui o ka hopena possity kiʻekiʻe: Hoʻonui i ka manawa kūpono o nā hemahema e like me keʻano o ke ono a me nā pololi, nā hopena hoʻohālikelike.

7. Pehea e koho ai ma waena o ka hoʻopukapukaʻana o ka hoʻopukapukaʻana a me ke ahi

Ke kohoʻana i keʻano o ke kaʻina hana kūpono e pili ana i ka hana kaulike, Kālā, a hana i ka hana kūpono. Ke hilinaʻi nei ka hoʻoholo i nā mea i hoʻopiliʻia:

8. ʻO nā hiʻohiʻona hope loa ma Canding Technology

Ke hele mau nei kaʻoihana kūʻai aku, alakaʻiʻia e nā holomua i kaʻepekemaʻepekema, hana maʻalahi, a me nā pahuhopu susaintability.

Automation a me ke kamepiula

• ʻO ke kāhikoʻo Robotic Moding a e ninini: Ua hōʻemi nā'ōnaehana automated, hoʻomaikaʻi i ka kūleʻa, a e hoʻonui i ka palekana i ka loaʻa kālā a me ke kauʻana o ke one.
• Ke nānā aku nei ke kaʻina hana: ʻO nā meaʻike a me nā mea e makemake ai i nā mea i hiki ke nānā i ka manawa maoli, nā kūlana, a me nā waiwai waiwai, Hoʻonuiʻana i ka mana kūpono.
• Hoʻolālā ka kamepiula (Cad) a me ka simulation: ʻO ka hoʻopiliʻana i ka polokalamu simulation holomua i nā polokalamu i wānana i ka hoʻopihaʻana, Kūpuia, a me ka hana hewa, Hoʻolālā i nā hoʻolālā ma mua o ka hanaʻana.

Hoʻohui hoʻohui hoʻohui

• 3Nā hiʻohiʻona paʻi a me nā pā: Ka hoʻohui hoʻohuiʻana i ka hana hana rapid o ka hanaʻana i nā hiʻohiʻona wax a me nā curright.
  Hoʻololi kēia i ka manawa alakaʻi a me nā kumukūʻai hana, ka nui no ka haʻahaʻa haʻahaʻa a me ka prosttype holo.
• Nā kaʻina hana Hybrid: Ka hoʻohuiʻana i ka paʻi 3D e paʻi me ke kāʻei kūlohelohe, e like me nā mea i paʻiʻia ma luna o nā mea kūʻai aku i hoʻopaʻaʻia no ka hoʻopukapukaʻana a iʻole nā molū o nā papa, aeʻae i ka hoʻolālāʻana i ka hana kūʻokoʻa a me ka wikiwiki wikiwiki.

9. Hopena

ʻO ke kālā kālāʻeluaʻelua e kau nei i ke kīwī ma keʻano he mea nui i ka hanaʻana i ka hana hou.

ʻO ka mea kūʻai aku i nā mea kūʻai aku i ka wā i ka wā o ka pololei, huanui, a he mea nui loa nā mea hana kiʻekiʻe, ʻOiai ke kauʻana o ka Sanding i ke koena o Go-to Soft no ka nui, rousst, a me nā'āpana waiwai.

ʻO ke koho maikaʻi loa e pili ana i nā koi o ka hanaʻana i nā pono hana me ka waihona kālā, ka manawa o waena o ka hoʻomaka a i ka wā pau, a me nā manaʻo noʻonoʻo.

ʻO kaʻike loea o Langhe

Langhe he mea hāʻawi i hāʻawiʻia i ka honua honua Kāhaka kūʻai kūʻai vsa Sand cread Nā hopena, hāʻawiʻia i ka maikaʻi kiʻekiʻe, Nā'āpanaʻokoʻa-ʻenehana no ka nui o nāʻoihana. Me nā wahi hana holomua a me nā makahiki he mau makahiki o ka loaʻaʻana o kaʻike, Langhe Hono:

• Nā Kūlana Kūlana Kūlana: Mai ka intricate Kāhaka kūʻai kūʻai (Ke kaʻina hana-Wax) No ka mea paʻakikī, mau'āpana kiʻekiʻe i Sand cread No nā hana nui a me nā mea kaumaha nui.
• Pūnaewele Hoʻohui: Hiki ke hana me nā mea kanu lāʻau, Hualaola, Nā Kahu Pūnaewele, hūnā i nā irons, Apana Apana Aluminum, a me nā metala kūikawā e like me Titanium.
• ʻO nā lawelawe hope-hope: Kākoʻo Kākoʻo, HoʻolālāʻOi loa, rapid prototyping, ʻO ka hana wela, a me ka mana kūpono e hōʻoia ai e hōʻoia i ka maikaʻi maikaʻi a me ka hana.
• Nā kikowaena honua a me ka mana maikaʻi: Adtherense i nā kūlana honua (ISO, Hosm) Me ka nānāʻana, NDT Hōʻike, a me ka hōʻoia o ka dimedional.
• Nā pālahalaha hana hoʻohālikelike: Nā hopena kūpono kūpono no nā prototypes, Nā'UAlelo Kūʻokoʻa, a iʻole ka hana nui.

Ma ka hoʻohuiʻana ka pololei o ka hoʻopukapuka kālā me ʻO ka pākaukau a me ke kāʻei o ka pā o ka one, Langhe E hui i nā koi koi o nā mea kūʻai aku ma waena o Aerospace, aitompetitive, ikaika, NA KAHIKI, a me nā'āpana'ē aʻe honua.

Kāhea iā mā˚ou!

FaqS

ʻOi aku ka maikaʻi o keʻano no ka prototyping?

Sand cread, Ma muli o nā kumukūʻai haʻahaʻa haʻahaʻa ($500- $ 5,000) a me nā manawa wikiwiki (2-4 mau pule) No nā lāʻau lāʻau a iʻole 3d-i paʻiʻia.

Ke kūʻai aku nei ka uku kūʻai kūʻai kālā a ka 4-8 i ka hebedoma a me nā uku kiʻekiʻe e hana ai i nā kumukūʻai e like me ka mea kūponoʻole keʻano o ka prototypes.

Hiki ke hoʻolilo i ka hoʻopiliʻana i ka hoʻopiliʻana i ka machining?

Pinepine, ʻAe. No nā'āpana paʻakikī (E.g., he kapa turbine me 10 ʻO ka hana makona), ʻO ka hoʻolaunaʻana i ka hoʻolimalimaʻana i ka mīkini ma ka 70-90%, Nā koho koho e 30-50% no ka hana kiʻekiʻe-Volume High.

ʻO ia ka mea e hele hou ana i ka nohoʻana?

ʻO Sand Cowing he kihi: ʻO ka'ōmaʻomaʻo'ōmaʻomaʻo 90% recyclable, A KAHOHE ANA (pāanikino) he biodegradable.

Hoʻokomoʻia ka waiwai kūʻai aku i nā mea i pauʻole (non-recyclable) a hoʻohana hou i ka ikehuʻoi aku ka ikaika, Ke hoʻonui nei i kona wāwae carbon ma 20-30% vs. Sand cread.

ʻO ia keʻano o ka hanaʻana i nā alominum alumini?

Nā hanaʻelua, akā, makemakeʻiaʻo Sand Canding no nā'āpana alumini nui (E.g., Nā poloka mīkini) Ma muli o ke kumukūʻai haʻahaʻa.

ʻOi aku ka maikaʻi o ka kūʻaiʻana i ka mea kūʻai aku no ka liʻiliʻi, Nā'āpana aluminum aluminum (E.g., AETERPACE Fittysings) kahi e pau ai ka papa a me kaʻae e hōʻoia i nā uku kiʻekiʻe.

He aha ka hapa nui loa o ka paʻakikī no ka mālamaʻana o Sand?

Hiki i ke one ke kūʻai aku i nā'āpana me ka paʻakikī o ka paʻakikī (E.g., 3-5 cavities kūloko) Ke hoʻohana nei i nā kālā o Sand, akā, lalo a iʻole nā hiʻohiʻona <3 mm he pilikia.

ʻO nā mea kūʻai aku e hoʻolei nei i nā lima 10+ Nā hiʻohiʻona (E.g., nā channels kūloko, KauwaiHua) Keʻole o nā kumuwaiwai, ka hana houʻana i kahi kūpono no nā hoʻolālā paʻakikī.