ʻO nā kila kila maʻamau: Ua loaʻaʻo Kina kiʻekiʻe

1. Hōʻikeʻike

ʻO keʻano hana stielless ka hanaʻana he hana hana koʻikoʻi e hana i nā mea hana kiʻekiʻe e hana i nā mea hana kiʻekiʻe ma waena o nāʻoihana e koi ana i ke kū'ē, durability, a me ka dimedonal.

Ma ka nininiʻana i nā kila kila kila, Hiki ke hanaʻia nā'āpana paʻakikī me nā mea paʻa paʻa a me nā mea maikaʻi loa, e hana ana i kahi hopena kūpono no ka hoʻopiliʻana a me nā noi kiʻekiʻe kiʻekiʻe.

Ua hoʻohālikelikeʻia i nāʻano hana'ē aʻe e like me ke kalaʻana a iʻole ka machining, ʻO ke kīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwīwī, mea kūponoʻole, a me ka kūpono no ka haʻahaʻa haʻahaʻa haʻahaʻa.

Ua ulu kona manaʻo i nā'āpana e like me ka ikehu, aitompetitive, AerERPPACE, ʻO ka ho'ōlaʻana i ka meaʻai, a me kaʻenehanaʻenehana, Ma kahi o ka hana a me ka lōʻihiʻole o ka lōʻihiʻole.

2. He aha ka mea kila kila?

Kila kohu ʻole ʻO ke kākā i ke kaʻina hana hana kūpono e hana ai i keʻano o ke kila kila moltenst.

Hoʻohui ia i nā waiwai o nā corrosionion-resistant o ka mea kila kūponoʻole me ka pololei o ka dimension.

Hāʻawi kēia kaʻina hana i nā mea hana e hana i nā'āpana me nā geometries geometries, nā pāʻili, a me nā mea maikaʻi maikaʻi e hoʻopau ai a paʻakikī paha e hoʻokō ai ma o ka machining a iʻole ke kalaʻana.

Hiki ke laweʻiaʻo Stielless Steel i keʻano o ka hoʻohanaʻana i nāʻano likeʻole, komo me ka hoʻopukapukaʻana, Sand cread, Atlelo WOLD Kākoʻo, Ke hilinaʻi nei i ka nui o ka'āpana, kinona, a me nā koi hoʻokō.

Kākoʻo ia i kahi ākea ākea o nā graked, Martesestic, Duplex, a me nā mea i loaʻaʻole i nā mea hoʻowalewale-paʻakikī i hāʻawiʻia i nā mea i hoʻopaʻaʻia i nā waiwai, paʻakikī, a iʻole ke kū'ēʻana.

3. Nā mea kūʻai aku maʻamau maʻamau no ka mālamaʻana

ʻO ke kila kila e hoʻopili ana i ka hoʻopuniʻana i kahi ākea ākea o nā alloys, kēlā me kēiaʻenehana e hoʻokō i nā kūlana hana kūikawā.

ʻO kēia mau helu helu i kau muaʻia ma luna o kā lākou microstructure: Austetetitic, Martesestic, ferritic, Duplex, a me ka loaʻaʻana-paʻakikī (Ph) nā mea kanu lāʻau.

Nā mea kūʻai aku maʻamau maʻamau no ka mālamaʻana

4. ʻO nā hana kila kila

ʻO ka mea kūʻai kūʻai kūʻai kūʻai kūʻai (Nalowale shop)

Kāhaka kūʻai kūʻai heʻano hana koho kūpono e hoʻomaka ana me ka hoʻokumuʻana o kahi hiʻohiʻona Wax e hoʻololi i kaʻaoʻao hope loa.

Ua'ākoakoa kēiaʻano hana wax i kahi lāʻau wax (No ka hoʻoiliʻana i ka batch) a uaʻoki pinepineʻia i loko o kahi slurry clurcy e kūkulu i kahi mea.

Ma hope o ka paʻakikī o nā loina, Ua'ōleloʻia ka mold holoʻokoʻa e hoʻoheheʻe i ka wax (hoomoana), Ke waiho nei i kahi lua o ka hollow cemic.

Ua nininiʻiaʻo Molten Insaelless Steel i loko o ka shell Heated, ʻaeʻia no ka hoʻopiha pihaʻana.

I hoʻokahi manawa, Ua wāwahiʻia kaʻili o ka ceramic, a hoʻomaʻemaʻeʻia ka paleʻana, i mālamaʻia, a hoʻopauʻia e like me ke koiʻia.

• Hiki i keʻano ke nānā i nā kiʻekiʻe kiʻekiʻe, e hiki ai i nā mea hoʻohālikelike a me nā pale i hoʻopaʻaʻia.
• Mea maʻamau no nā'āpana e koi ai i nā mea i hoʻopaʻaʻia (± 0.1 mm), Hoʻopau i nā mea hoʻokele (RA 3.2-6.3 μM), a me nā hiʻohiʻona paʻakikī.

ʻO ke kila kila kila

ʻO Sand e hoʻohana ana i ka hoʻohanaʻana i kahi papa i hanaʻia mai ka silica one, ʻO nā mea maʻamau i hoʻopaʻaʻia me ka clay a iʻole nā mea kanu lāʻau.

ʻO kahi lāʻau lāʻau a iʻole keʻano kīwī i paʻiʻia i loko o ke one e hana i kahi lua maikaʻiʻole. No nā hiʻohiʻona paʻakikī, Hoʻokomoʻia nā code one.

Ua hoʻopiliʻia nā pale mold, a ua nininiʻia ke kila kila kila.

Ma hope o ka hōʻoluʻolu a me ka hoʻoponopono, Ua wāwahiʻia ke kahe o ke one, e hōʻike ana i ka pākuhi paʻakikī.

• ʻO kēiaʻano hana kūpono loa i nā hua'ōlelo a me ke kaupaonaʻana i nā mea e hiki ai ke hana i nā'āpana mai kahi mau kila.
• He loosers ka looser (± 1.5 mm a keu paha), ʻO ka hoʻopauʻana a me ka pā (RA 12.5-25 μM), pinepine e koi ana i ka post-machining.

ʻO ka cheelle cheelle

Nā pāpale pīpī pale is a variation of sand casting that uses resin-coated, ʻO ke one maikaʻi-palaoa a me kahi pākuhi het.

Keʻano o keʻano o keʻano i ka resin e ho'ōla i ka cure e like me ke kauʻana o ke one, Ke hana nei i kahi'āpana, iwiihu'ā (maʻamau 5-10 mm mānoanoa).

Laweʻia nā'ōmole, 'ākoakoa, a piha i ka kila kila kila.

Ma hope o ka holoiʻana, Ua wāwahiʻia ka mea, a ua like ka hapa o ka mahele i ka hoʻopukapukaʻana a iʻole nā hale noho.

• Hāʻawi i kahi kūpono o ka dimensional (± 0.5 mm) a hoʻopauʻia (RA 6.3-12.5 μM) ma mua o ke kīʻana.
• ʻOi aku ka kūpono no ka hanaʻana o ka nui o ka nui o ka nui o nā'āpana maʻalahi.

ʻO ke kīwī kīwī Ceel CaltRifugal

I ka cenrifugal, Ua hoʻololiʻia kahi mollow cylindrical i nā wikiwiki kiʻekiʻe (300-3000 rpm) ʻOiaiʻo ka mea mollet i nininiʻia i loko o ia.

Hoʻopili ka luna o ka Centrifugal i ka mea hao molten i waho i waho i nā paia modd, hopena i kahi pā, ʻO keʻano kūpono maikaʻi me nāʻano liʻiliʻi.

Hiki i ke axis o ka huliʻana ke hiki ke kiʻekiʻe (No nā paipu) a iʻole kūlike (No nā apo a iʻole nā mea kanu lāʻau).

E like me ka mea e hoʻopili ai i nā mea kūʻai mai waho mai o waho, Ua koiʻia nā mea haumia i ka diameter i loko a hiki ke hoʻonuiʻia.

• Hāʻawi kēia kaʻina hana i nā mea hana maikaʻi loa a me nā kumu waiwai nui o ka palaoa ma muli o keʻano kuhikuhi.
• Kūpono no nā noi e koi ana i ka ikaika kiʻekiʻe, ke kū'ē kū'ē, a me nā hana liʻiliʻi.

ʻO nā mea kila kila kila (Mau loa) Kauhi

ʻO ka mea hoʻokele keleawe e hoʻohana ai i ka USES i nā kila mau a iʻole i hoʻoleiʻia i nā moll mau a iʻole nā mū i ke one a iʻole nā molū.

Ua hoʻokomoʻiaʻo Molten Insaelless Steel i ka gravity, haʻahaʻa haʻahaʻa, a iʻole ke kōkuaʻana i ke kōkua i loko o ka mū mua.

Hiki i ka mold ke komo i nā cores retractable a iʻole nā mea i hoʻopiliʻia no nā geomex paʻakikī. ʻO ka manawa a me nā mea momona a me nā mea paʻa, weheʻia ka moll, a uaʻaeʻia ka māhele no ka hoʻopauʻana.

• Hana i nā kūlike, Nā hopena hou me nā mea hana paʻa (± 0.25-0.5 mm) a me ka pau loa (RA 3.2-6.3 μM).
• ʻO ka hoʻokele waiwai no nā helu hana kiʻekiʻe-kiʻekiʻe ma muli o nā manawa wikiwiki wikiwiki a hoʻemi i ka hana.

5. ʻO ke kaʻina hana kūʻaiʻana: Step-by-hana (Kūlana mea kūʻai aku kālā)

1. Kumukaha Kahuna: Nā Kūlana Wax (± -2 mm engelerance) i loko; Hoʻopiliʻia nā hiʻohiʻona lehulehu i kahi lāʻau wax.
2. Kaila: Hoʻokomoʻia nā hiʻohiʻona i loko o ka slurry ceremic (Silica / Alluina) a me nā'āpana me ke one, E hana hou ana i nā manawa 6-8 e kūkulu i kahi pahu 6-10 mm.
3. Dewaxiing a me ka pīpī: Hoʻoholoʻia nā Shells i 160-200 ° C e Melt Wax (kiʻi houʻia), A laila ua puhiʻia ma 900-1,050 ° C e paʻakikī i ka pale.
4. E ninini ana: ʻO ka kila kila molten (1,450-1,530 ° C no CF8M) ua nininiʻia i loko o kaʻili ma lalo o ka gravity a iʻole ka hakahaka e pale aku ai i ka poosity.
5. Mālama a me ka hoʻoponopono: Kāohiʻia hōʻoluʻolu (ea a wai paha) pale i ka huki wela; manawa hoʻonā manawa: 5-30 mau minuke (Hoʻololi ma ka'āpana nui).
6. Ke kikeke a me ka hoʻomaʻemaʻe: Ua hoʻohālikelikeʻia nā'āpana me ka hammering a iʻole nā wai wai; Uaʻokiʻia nā gates / Risers, a me nā'āpana he mau'āpana e hoʻokaʻawale i ke koena cerramic.
7. ʻO ka hana wela: Nā helu Austetitic (CF8, Cf8m) he hopena (1,050-1,150 ° C, ka wai) e hoʻokaʻawale i nā kaʻa. ʻO nā māka martestitic (CA15) ua kiiʻia aʻoluʻolu hoʻi no ka paʻakikī.
8. Nānā: Nā loiloi dimensional (Cmm), Ndt (DENA PEVERETRAT), A me ka hōʻike hoʻokolohuaʻana (ikaika ikaika) E hōʻoia i ka hoʻokō.

6. Ke hoʻopau nei i nā koho o nā koho kila kila

Ke hoʻopau nei ka paleʻana i nā mea kila kilatino (E.g., Ke kū'ē neiʻo Corrosionion, E kāʻei i ke kū'ē) a me nā mea hoʻopiʻi Aesthetic.

Ke kohoʻana o ka hoʻopauʻana i nā palapala noi, nā papa hygienic i nā mea hanaʻoihana e pono ai e hoʻonui i ka durability.

Pana pua

Ua hoʻohanaʻo Slasting e hoʻohana i nā mea kiʻekiʻe-velocicity frashive (kila geel, Nā Beads CEMIM, a iʻole ke aniani) e hoʻomaʻemaʻe a hoʻomaʻemaʻe i nā papahele.

• Ke kaʻina hana: Hoʻopiliʻiaʻo Media ma ka 60-100 m / s ma o ka nui o nā huila a iʻole nā huila, Ke wehe nei i nā mea paʻahao (E.g., reramic residude mai ka hoʻopukapuka kālā) a ke hana nei i kahiʻano papa hana maʻamau.
• Nā hopena: Ka paakiki (Ra) o 3.2-6.3 μM; hoʻomaikaʻi i ka adhesion no nā pena, Nā pāpale, a iʻole ka pauʻana.
• Noi: Nā kino vangsicalrial, Nā Hale Hōʻikeʻike, a me nā meaʻala i nā wahi kahi i loaʻa ai kahi mea i loaʻa i kahi mea i hoʻopaʻaʻia i loko o ka nohoʻana.

Pickling a me ka uku

ʻO kēia mau mea lapaʻau e hoʻonui ai i nā pale corrosion e pili ana i ka weheʻana i nā haumia a hoʻopaʻa i ka mikiʻana o ka chromium.

• Pickling: Hoʻohana i kahi maʻi nitric-hydrofluoric acid e hoʻopau i ke kāʻei, 'ōwili, a me nā mea haoʻole mai ka lawaiʻaʻana i nā papa. Koʻikoʻi no ka laweʻana i ka mīkini wela (oxiyan) mai nā wahi i mālamaʻia a iʻole ka wela.
• Hoʻolauna: Hahai hou aku, ka hoʻohanaʻana i ka nitric acid e hoʻonui i kaʻike chromium i loko o ka pahu oxie, Ke kū'ē nei i ke kū'ēʻana. E hoʻopili ana me ka astm a967 no nā mea kanu lāʻau.
• Nā hopena: Hoomae, ʻO Oxide-Free Mokuna me RA 1.6-3.2 μm; Mālama i ka Pitking Pitking i nā wahi chloride (E.g., Ke wai wai).
• Noi: Nā lako hana meaʻai (304 KAHOu), KOMIKANA LOA (316 KAHOu), a me nā mea lapaʻau e uku ana i ka biocomopibility.

Uilaiauliwi

ʻO ka electroprophinging kahi kaʻina electrochemical e wehe i kahi'āpana'āpana o ka metala (5-50 μm) e hoʻokō i kahi aniani-like like.

• Ke kaʻina hana: Nā mea kūʻai aku e like me keʻano o keʻano ma kahiʻauʻau electrlyte (ʻO Phosphorig / sulfuric ACID), Me nā mea e hōʻoleʻole i nā meaʻole.
• Nā hopena: ʻO kaʻaoʻao maikaʻi-maikaʻi (Rand 0.025-0.1 μm) me ka hoʻomaʻemaʻeʻana i nā polike maʻemaʻe-microscopic a me nā crevices (Nā pūnaewele kūpono no ka uluʻana) ua hoʻopauʻia.
• Loaʻa: Hoʻonuiʻo Corrosion Corrosiotion e 30-50% vs. Hōʻike wale nō; hoʻemi i ka friction i nā noi o nā helu (E.g., nā'āpana'āpana).
• Noi: Nā lako hana o Plarmaceutical (316L sarings), nā mea kani, a me nā mea semiconducor e hiki ai ke hoʻokaʻawaleʻia nā'āpana.

Machuning a me ka heleʻana

No nā hale mālama e koi ana i ka mana o ka dimpion, Ua hana pinepineʻiaʻo Maching me ka hoʻopauʻana:

• Ke huli/MilightʻAʻole: Hoʻopau i 0.1-1 MM o nā mea e hoʻokō ai i nā mea hana e like me ka paʻa o ± 0 0 mm (E.g., ʻO nā noho Valve e koi ana i nā māhele haʻahaʻa).
• Kūhā: Ua hoʻokōʻo Signing Grinding i nā'āpana i loko 0.005 mm / m a me ram05-05-0.1 μm, koʻikoʻi no ka laweʻana i nā papa i loko o Aerospace Beasts.
• Nā Kūlana / Tapping: Hana i nā kaula pololei (Iso metric or npt) i nā blanged a iʻole nā kūpono, hōʻoia i ka compatibility me nā'ōnaehana piping.

Nā hoʻopau'ē aʻe

• Hoʻopaʻa ʻana i ka Bead: Hoʻohana i nā mea hoʻohui hoʻohui (nā aniani aniani) ma mua o ka panaʻana i ka panaʻana e hana i kahi lole, pau loa (Ra 1.6-3.2 μm) Me kaʻole o ka hoʻololiʻana i nā'āpana.
  Maʻamau i loko o nā hale kūʻai pūnaewele (E.g., Handrail) No nā hoʻopiʻi Aesthetic.
• Electroplating: E pili ana i kahi'āpana'āpana o nickel, chrome, a iʻole ke gula no nā kumu hoʻonaninani a hoʻonuiʻia paha.
  Hoʻohanaʻia ma nā kūlana kiʻekiʻe (E.g., Mary Ples) kahi e pili ai keʻano.
• ʻO Laser Engraving: Hoʻohui i nā hōʻailona mau (Nā helu helu, logos) e hoʻolei i nā papaʻole me kaʻole o ka hoʻopiliʻana i ke kū'ē kū'ē, pono no ka traceitability ma aerospace a me nā noi lapaʻau.

7. Nā mea mechanical a me ke kino o nā mea kila kila cheinless

8. Loaʻa i nā mea kila kila kila

• ʻO ka geometry paʻakikī: Hana i lalo, nā pāʻili (≥1 mm no ka hoʻopukaʻana), a me nā kāpena kūloko-e.g., Cf8m valve balve body me nā hoʻolālā lehulehu.
• Ke hoʻopauʻana i ke kiʻekiʻe: Hoʻokomoʻia ka mea kūʻai aku i nā mea kūʻai aku ma RA 1.6-3.2 μm e like me-lawe, e hōʻemi ana i ka hoʻoiliʻana.
• Mea kūponoʻole: 70-90% kumuhana hoʻohana i hoʻohana. 30-50% no ka machining, ʻO nā kumukūʻai haʻahaʻa haʻahaʻa.
• Hoʻolālā Hoʻolālā: Mālama i nā'āpana'āpana (E.g., ke hoʻololiʻana 5 nā mea hoʻohui me nā 1 noho'āpana, ʻO ka ho'ēmiʻana i nā kumukūʻai o ke kūlanakauhale e 40%).
• Alloy infytility: Kūpono me nā helu mai nā kumukūʻai haʻahaʻa 430 i ka hana kiʻekiʻe 310 (25CR-20ni) no ka wela wela.

9. Nā palena a me nā paʻakikī

• Uku kiʻekiʻe: 30-50%ʻoi aku kaʻoi aku ma mua o ka carbon solel casel e hoʻolei ana ma muli o nā mea'ē aʻe (E.g., nickel i 304).
• Nā manawa lōʻihi: Pono nā mea kūʻai aku i ka hoʻolimalimaʻana i nā hebedoma 2-4 no nā mea hana a me nā'āpana mua, vsa. 1-2 mau pule no ka mālamaʻana o Sand.
• Nā hopena defect: Shrinkage (1.5-2.0% ka hoʻemiʻana i ka nui) a me ke kii wela (I nā helu Marbentitic) me kaʻole o ka hoʻokō ponoʻana.
• Nā Kūlana Kūlana Kūʻai: Nā'āpana ≥50.; Pono i nā alaloa (ʻO nā mea i loaʻaʻole metala) e hānai i nā kila molten.

10. Nā noi o nā mea kila kilatinoʻole

Na'Āpana Nossopace

• Nā'āpana: Nā'āpana o Turbine, hanakai, Na'Āpana Engine, Nā'āpana hoʻonohonoho, Nā'ōnaehana exhaust.

Ka Hoʻolālā Wīwī

• Nā'āpana: Exhaust inifolds, ʻO nā hale heʻe, Nā Caliper Calipers, nā mea hoʻopiʻi suspension.

Kaʻoihana a me nāʻoihana holoholona

• Nā'āpana: Nā Vilves, Pumps, pipet complees, Nā'āpana hou, nā mea hana wela.

ʻO kaʻoihana hoʻomaʻamaʻa meaʻai

• Nā'āpana: Momoterl, Nā Vilves, Pumps, Nā'āpana conveyor, ʻO ka hoʻoiliʻana i nā lako.

ʻO Marine lāuaʻo Marciellingʻoihana

• Nā'āpana: Huakai, Nā papahele, Nā Vilves, Nā kāpili pump, ʻO nā'āpana kai moana kai.

Ka oi hawaii (E komo pū me ka ikaika a me ka ikaika hou)

• Nā'āpana: Nā'āpana Turbine, nā kino valve, Nā kāpili pump, Nā'āpana hana.

Kūkulu a me nā mea kaumaha

• Nā'āpana: Nā'āpana Hydraulic, Nā'āpana excavator, hoʻonohonohoʻia, Ke hāpai nei i nā lako hana.

ʻO kaʻoihana lapaʻau a me nāʻoihana lāʻau lapaʻau

• Nā'āpana: Nā mea hana ʻokiʻoki, Nā lako hana sterilization, Nā'āpana pā, nā kino valve.

Ka mālama wai a me ka popo

• Nā'āpana: Nā Vilves, pipet complees, Nā Hale Hōʻikeʻike, Nā'āpana kānana.

Nā mīkini mīkini

• Nā'āpana: Kauluhi, urowing, Kākoʻo kākoʻo, Nā waihona mīkini, Nā'āpana Hydraulic.

11. ʻO ka kila kila. E kala a me ka machining

12. Ka mana kūpono a me ka ho'āʻo

• ʻO ka hōʻike hoʻokaumahaʻole (Ndt):

• • X-ray: ʻIke i ka poosity kūloko (koʻikoʻi no nā kīʻaha koʻikoʻi).
  • Ultrasinatic: E hoʻomaopopo i nā cracks i nā'āpana mānoanoa (E.g., duplex paila flanges).
  • DENA PEVERETRAT: Hōʻike i nā hemahema o ka papa ma ka lāʻau mardelitic (Astm e165).

• Ke nānāʻole neiʻo Dimensonal: Cmm (ʻO ka mīkini hōʻailona hōʻailona) E hōʻoia i nā mea hana i ± 0.005 mm.
• ʻO ka loiloi Chemical: ʻO ka mea e like me ka mea empist (Poina) hōʻoia i ka hoʻohui hoʻohuiʻana (E.g., 18± 1% cr in cf8).
• Nā hōʻike hoʻokolohua hoʻokolohua: Nā Hōʻike Tesile (Astm A370) a me nā hōʻike hopena (Chary v-notch) hōʻoia ikaika a paʻakikī.

13. Hopena

ʻO keʻanoʻo Stiinless Caellest kahi kaʻina hana VERDATILE i keʻano he kaulike paʻakikī, Ke kū'ē neiʻo Corrosionion, a me ke kumukuai, e hoʻokō i ka hanaʻana o nā'āpana koʻikoʻi ma waena o nāʻoihana.

ʻO kona hiki ke hoʻololi i nā kila kila kila, ʻO nā'āpana hana kiʻekiʻe-mai nā mea kanu moana i nā mea lapaʻau i nā mea lapaʻau i loko o nā mea i hanaʻoleʻia i loko o ka hana hou.

ʻOiai e like me nā uku e like me ke kumukūʻai a alakaʻi i nā manawa hoʻomau, holomua ma ke kaʻina hana (E.g., simulate kamepiula o ka hoʻoponoponoʻana) a me nāʻepekema waiwai (E.g., nā alloys kiʻekiʻe) E hoʻomau i ka hoʻonuiʻana i kāna mau hiki.

LangHe: ʻO ka kila kila kūponoʻole & Nā lawelawe hoʻokipa

LangHe he mea hāʻawi i hāʻawiʻia ʻO nā kila kila kiʻekiʻe kiʻekiʻe, lawelawe i nāʻoihana ma kahi e hana ai, durability, a he koʻikoʻi nā kuʻekuʻe corrosion.

Me nā mea hana holomua holomua a me kahi kūpaʻa e hana i ka hana i ka hana, LangHe Hāʻawi i ka hilinaʻi, ʻO nā mea i hanaʻoleʻia e hoʻopili i nā hopena kila e hoʻokō i nā koi noi noi nui loa.

Hoʻokomoʻia kā mākou mau mea hana kila kūpono:

• Hoʻolei kālā & Nalowale shop
  ʻO ka nānāʻana kiʻekiʻe loa no nā geometries paʻakikī, e hōʻoia ana i nā mea i hoʻopaʻaʻia a me nā kiʻekiʻe kiʻekiʻe.
• Sand cread & Nā wili lei
  Kūpono no nā'āpana nui a me nā hana kūpono, no nā'āpanaʻoihana a me nā pae hoʻonohonoho.
• CNC Mīkini & Post-ho'ōla
  Hoʻopiha i nā lawelawe machining e komo pū ana, MilightʻAʻole, hoʻomālamalama, Kāleka, a me nā hana kino.

Inā makemakeʻoe i nā'āpana kiʻekiʻe, ʻO nā mea hoʻokūkū paʻakikī, a iʻole nā'āpanaʻokoʻa, LangHe ʻO kāu hoa noho hilinaʻi i loko o ka hana sweel hoʻopunipuni.

Kāhea iā mā˚ou I kēia mau lā e aʻo pehea LangHe hiki ke hāʻawi i nā hopena steelless i nā hopena i nā hana me ka hana, hilinaʻi, a me ka pololei pololei i kāu mau noi.

FaqS

He aha ke ala maikaʻi loa no ka nānāʻana i nā kila kila?

Hilinaʻi i nā koi: Ke kūʻai aku nei i ka waiwai no ka pololei (±,05 mm) a me ka paʻakikī; Sand Canding no ka nui, nā'āpana haʻahaʻa haʻahaʻa; ʻO Centrifugal e kāhea ana i nā mea e like me nā pipes.

Pehea ka ikaika o ka paleʻana i ka kila?

Nā helu Austetitic (CF8, Cf8m) e loaʻa nā ikaika o nā densile o 550-650 MPA; Martiketic ca15 (410) hiki aku 800 MPA ke lilo ana ka wela; Uaʻoi aku ka nui o nā CD4mc CD4mc 690 Mpa.

Hiki ke kiola aku i ka kila kila?

ʻAe. Nā helu Austetitic (CF8, Cf8m) Weld Well me 308l filler; Pono nā māka martestitic (200-300 ° C) a me ka post-weld e hoʻokaʻawale i ka paleʻana.

He aha ka cf8m stainless steel ceel ceel i hoʻohanaʻia no?

Cf8m (kiola 316) he kūpono no nā wahi kūpono: ʻO nā lāʻau lapaʻau o keʻano, fouty aila huapalakuali, Aʻo Marine Hardreware, Mahalo i kāna mau molybdenum-hoʻonui i ke kū'ēʻana.